2016 Toyota Camry Oil Capacity & Filter

The 2016 Toyota Camry takes between 4.5 to 4.7 quarts (4.3 to 4.5 liters) of 0W-20 engine oil, depending on the engine.

Quick answer

• 2.5L 4-cylinder Engine (2AR-FE)

  • Oil Capacity: 4.7 quarts (4.5 liters) with filter
  • Recommended Oil Weight: SAE 0W-20
  • Oil Specification: API SN PLUS or later, or ILSAC GF-5 or later
  • OEM Oil Filter: Toyota P/N 04152-YZZA1
  • Aftermarket Oil Filter Cross-References:
    • Fram: CH10158
    • Wix: 57067
    • Mobil 1: M1C-153A

• 3.5L V6 Engine (2GR-FE)

  • Oil Capacity: 6.4 quarts (6.1 liters) with filter
  • Recommended Oil Weight: SAE 0W-20
  • Oil Specification: API SN PLUS or later, or ILSAC GF-5 or later
  • OEM Oil Filter: Toyota P/N 04152-YZZA1
  • Aftermarket Oil Filter Cross-References:
    • Fram: CH10158
    • Wix: 57067
    • Mobil 1: M1C-153A

Capacity by engine option

Oil change interval

Toyota recommends adherence to the maintenance schedule outlined in your owner's manual. Generally, the following intervals apply for a 2016 Camry:

• Normal Duty: Every 10,000 miles or 12 months, whichever comes first.
• Severe Duty: Every 5,000 miles or 6 months, whichever comes first. This applies to conditions such as frequent short trips (less than 5 miles), extensive idling, towing, driving in dusty conditions, or extreme temperatures.

Regularly checking your oil level between changes is always good practice to ensure proper lubrication and prevent potential engine damage.

Drain plug torque

For both the 2.5L 4-cylinder and 3.5L V6 engines in the 2016 Toyota Camry, the drain plug torque specification is 29 lb-ft (39 N·m).

Always use a new crush washer with each oil change to ensure a proper seal and prevent leaks. Toyota OEM crush washers are typically aluminum or copper.

How to change the oil

1. Gather Supplies: Ensure you have the correct oil, oil filter, drain pan, wrench for the drain plug, oil filter wrench, funnel, and a new crush washer.
2. Warm Up Engine (Optional): Driving the car for a few minutes can help the oil drain more easily, but be cautious as components will be hot.
3. Lift and Secure: Safely lift the front of the vehicle using a jack and secure it with jack stands on a level surface.
4. Locate Drain Plug: Place the drain pan underneath the oil pan and locate the drain plug.
5. Drain Oil: Carefully remove the drain plug (counter-clockwise) and allow all the old oil to drain completely. Inspect the old crush washer.
6. Replace Drain Plug: Install the new crush washer onto the drain plug and tighten it to the specified torque of 29 lb-ft (39 N·m).
7. Remove Oil Filter: Locate the oil filter housing (cartridge style). Use the appropriate wrench to remove the housing. Be prepared for a small amount of oil to drain. Remove the old filter element and O-rings.
8. Install New Filter: Install the new filter element and replace the O-rings on the filter housing. Lubricate new O-rings with fresh oil. Hand-tighten the housing, then use the wrench to tighten to spec (typically marked on the housing, but generally around 18 lb-ft).
9. Add New Oil: Using a funnel, add the recommended amount of new oil through the oil filler cap on the engine.
10. Check Level: Start the engine and let it run for a minute to circulate the oil, then shut it off. Wait a few minutes for the oil to settle, then check the oil level on the dipstick. Add more oil if necessary.
11. Check for Leaks: Visually inspect around the drain plug and oil filter for any signs of leaks.
12. Dispose of Old Oil: Properly dispose of used engine oil at an authorized recycling center.

Common issues / tips

• Cartridge-Style Oil Filter: The 2016 Camry uses a cartridge-style oil filter, which requires an oil filter wrench that fits the plastic housing. Ensure you have the correct tool (often a 64mm, 14-flute wrench) before you start. New O-rings are typically included with your new filter element.
• Plastic Undercarriage Shield: You will need to remove or partially unclip a plastic undercarriage shield to access the drain plug and oil filter on most 2016 Camry models. This usually involves several 10mm bolts and plastic clips.
• Oil Consumption: While not a widespread issue for all 2016 Camrys, some Toyota engines of this era can exhibit minor oil consumption. It's always a good habit to check your oil level every few fuel fill-ups, especially as the vehicle ages.
• Synthetic Oil Recommended: Toyota recommends 0W-20 synthetic oil for optimal engine protection and fuel economy. Using conventional oil may impact performance and potentially require more frequent oil changes.

Need an oil change? Find a trusted shop on Repairius.