Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Wheel Alignment Specifications

    2019 Toyota Tacoma Wheel Alignment Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Toyota Tacoma? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    AngleFront PrefFront RangeRear PrefRear Range
    Camber0.0°-0.75° to +0.75°-0.2°-1.0° to +0.5°
    Caster3.5°2.75° to 4.25°N/AN/A
    Total Toe0.0°-0.08° to +0.08°0.08°0.0° to +0.16°
    Individual Toe0.0°-0.04° to +0.04°0.04°0.0° to +0.08°
    SAI13.0°12.0° to 14.0°N/AN/A
    Thrust AngleN/AN/A0.0°-0.15° to +0.15°

    Adjustability

    The 2019 Toyota Tacoma offers some factory adjustability for alignment angles, primarily focused on the front axle.

    Front Camber and Caster: These critical angles are adjustable on the Tacoma via eccentric cams located on the lower control arms. These cams allow for simultaneous adjustment of both camber and caster to bring them within the specified ranges. While factory adjustment is available, significant changes or corrections beyond a certain point may require aftermarket solutions like adjustable upper control arms (UCAs) or specialized cam kits, especially if the vehicle has been lifted or modified.

    Front Toe: Front toe is adjustable on the 2019 Tacoma through the tie rod ends. This is a straightforward adjustment that lengthens or shortens the tie rods, effectively changing the angle of the front wheels relative to each other.

    Rear Camber and Toe: On the 2019 Tacoma, rear camber and toe are generally non-adjustable from the factory. The rear axle is a solid axle design, and its alignment angles are largely determined by the condition of the axle housing, suspension components, and mounting points. If rear camber or toe is out of specification, it typically indicates bent or damaged components, such as a bent axle housing, worn leaf spring bushings, or damaged mounting brackets. In such cases, repair or replacement of the affected components is necessary to correct the alignment.

    Thrust Angle: Thrust angle is determined by the rear axle

    Need service on your Toyota Tacoma?

    Request service from shops in your area.

    More specs for the 2019 Toyota Tacoma

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email