2019 Toyota Tacoma Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Toyota Tacoma? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 83 ft-lb / 112 Nm | Always use a star/cross pattern for tightening |
| Oil Drain Plug | 27 ft-lb / 37 Nm | Replace crush washer with each oil change |
| Transmission Drain Plug | 29-33 ft-lb / 39-45 Nm | Automatic and Manual transmission specifications may vary. |
| Front Brake Caliper Bracket Bolts | 90 ft-lb / 122 Nm | |
| Rear Brake Caliper Bracket Bolts | 65 ft-lb / 88 Nm | |
| Front Brake Caliper Slide Pins | 25 ft-lb / 34 Nm | Ensure pins are lubricated with appropriate caliper grease |
| Rear Brake Caliper Slide Pins | 25 ft-lb / 34 Nm | Ensure pins are lubricated with appropriate caliper grease |
| Front Axle Nut | 173 ft-lb / 234 Nm | Single-use nut, always replace after removal |
| Rear Axle Nut | 179 ft-lb / 243 Nm | Single-use nut, always replace after removal |
| Spark Plugs | 13 ft-lb / 18 Nm | For 2.7L 4-cylinder and 3.5L V6 engines |
| Valve Cover Bolts | 7-8 ft-lb / 9-11 Nm | Hand-tighten, then use a torque wrench |
| Intake Manifold Bolts | 14 ft-lb / 19 Nm | For 2.7L 4-cylinder and 3.5L V6 engines |
Wheel lug torque pattern
For the 2019 Toyota Tacoma, always use a star or cross pattern when tightening wheel lug nuts. This ensures even clamping force across the wheel hub and prevents rotor warping or wheel damage. Start by hand-tightening all lug nuts, then progressively tighten them to the specified torque in the star/cross pattern until all nuts are at the correct specification.
Brake torque notes
When working on the braking system of your 2019 Toyota Tacoma, proper torque is paramount for safety and performance. Caliper bracket bolts are critical structural fasteners and must be torqued precisely. Slide pins, while not primary structural fasteners, ensure the caliper moves freely. Using the correct torque and appropriate high-temperature lubricant on these pins is essential for proper brake operation and even pad wear. Always clean threads thoroughly before reassembly and never overtighten brake components, as this can lead to stripped threads or damaged parts.
Why torque matters
Properly torquing fasteners on your 2019 Toyota Tacoma is not just a suggestion; it's a critical safety and performance requirement. Under-torqued fasteners can vibrate loose, leading to catastrophic component failure, while over-torquing can stretch bolts, strip threads, or crack components. This applies to everything from crucial wheel lug nuts that hold your wheels on, to engine and transmission components that keep your vehicle running smoothly. Using a calibrated torque wrench ensures that each fastener is tightened to its manufacturer-specified clamping force, which prolongs the life of your vehicle's components and ensures your safety on the road.
Disclaimer: Always consult your official OEM service manual for the most accurate and up-to-date torque specifications for your specific 2019 Toyota Tacoma model and trim. These values are provided for general reference and may vary based on engine, transmission, and other vehicle configurations. Critical fasteners should always be verified in the OEM service manual.
Find a trusted shop on Repairius.
More specs for the 2019 Toyota Tacoma
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Toyota Tacoma Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.