2020 Ford Ranger Paint Color Codes

Quick Reference

Where To Find Your Paint Code

Ford makes it easy to find your truck's paint code. Open the driver's side door and look for the Safety Compliance Certification Label, which is usually on the B-pillar (the post between the front and rear doors). This sticker contains a lot of information, including the month and year of manufacture, Gross Vehicle Weight Rating (GVWR), and tire sizes.

You'll find the paint code along the bottom edge of this label, typically under the letters "EXT PNT" (for Exterior Paint). The code is a two-character combination of letters and numbers, like J7 for Magnetic or YZ for Oxford White. Note that some colors may have alternate codes (like Z1 for Oxford White), but the primary two-character code is what most paint suppliers use.

Best Touch-Up Paint Sources

Once you've identified your paint code, you have several good options for sourcing touch-up paint to fix minor chips and scratches:

• Dupli-Color: Widely available at auto parts stores like AutoZone and Advance Auto Parts, Dupli-Color offers a range of ready-to-use pens, brush-in-cap bottles, and aerosol cans. They are a good, affordable choice for common colors like Oxford White (YZ) and Magnetic (J7).
• AutomotiveTouchup: This online retailer is an excellent source for precision-matched colors. They sell paint in all formats, from small ½-oz bottles to pens, aerosol cans, and even professional-sized cans for spray guns. They are particularly good for metallic and tri-coat colors, as their formulations are very close to the factory finish.
• Tcoat Custom-Mix: For a perfect match, especially on an older or sun-faded vehicle, a custom-mixed paint is your best bet. Suppliers like Tcoat can mix a batch of paint based on your VIN and paint code, ensuring the most accurate color possible. This is highly recommended for the tri-coat Rapid Red (D4) and White Platinum (UG).
• Ford Dealership: Your local Ford dealer parts department can sell you small touch-up bottles or pens of the factory paint. This is a reliable, if sometimes more expensive, option that guarantees an OEM product.

How to Use Touch-Up Paint

Achieving a near-invisible repair takes patience. Follow these steps for the best results:

1. Clean the Area: Thoroughly wash and dry the chipped area to remove all wax, grease, and road grime. Use a wax and grease remover or isopropyl alcohol for a perfectly clean surface.
2. Apply Primer: If the chip goes down to the bare metal, you must apply a thin layer of automotive primer first. This prevents rust and helps the color coat adhere properly. Use a fine-tip brush or a primer pen.
3. Apply the Base Coat: Apply thin, even layers of your color-matched base coat. For small chips, a toothpick or a micro-brush is often more precise than the brush included in the bottle. Allow each layer to dry completely (usually 20-30 minutes) before applying the next. Build up the color until it is level with the surrounding paint.
4. Apply the Clear Coat: After the final base coat has cured (check the paint instructions, but at least an hour is typical), apply one or two thin layers of automotive clear coat. This protects the color and provides the glossy finish. The clear coat should slightly overlap the original paint to seal the repair.

Color Matching Tips for Pearls and Tri-Coats

The 2020 Ranger was offered in two beautiful but complex tri-coat colors: Rapid Red (D4) and White Platinum (UG). These finishes get their depth from a three-stage process: a solid base color, a translucent pearl mid-coat, and a final clear coat.

• Buy the Right Kit: When ordering touch-up paint for a tri-coat color, you must buy a kit that includes both the base and the mid-coat. Applying just one will not match.
• Test First: Always test your technique on a piece of cardboard or a hidden area of the vehicle. The final color is highly dependent on how thickly you apply the pearl mid-coat.
• Blend Carefully: For best results, you need to blend the layers carefully. Tri-coat repairs are challenging, and for larger areas, professional application is often the best choice for a seamless match.

If you are ever uncertain about your paint code or color name, call a Ford dealer or a trusted paint supplier with your vehicle's VIN. They can confirm the exact color your Ranger left the factory with.

Find a trusted body shop on Repairius.