2022 Ford Ranger Paint Codes – Repairius.com

Quick Reference

Where to find your paint code

For your 2022 Ford Ranger, the paint code is most commonly located on the driver's side door jamb sticker. Open the driver's door and look for a label affixed to the door frame. This sticker contains various vehicle information, and your paint code will usually be listed under the "EXT PNT" or "Exterior Paint" heading. It will be a two-character alphanumeric code. If you have trouble locating it, check your owner's manual for the exact location.

Best touch-up paint sources

When it comes to touching up minor chips or scratches on your 2022 Ford Ranger, several reputable sources offer quality products:

• Dupli-Color: A widely available brand that offers a good range of factory-matched colors in pen, bottle, and aerosol formats. Their products are often found at auto parts stores.
• AutomotiveTouchup: This company specializes in custom-mixed touch-up paint specifically matched to your vehicle's factory color code. They offer a comprehensive array of products, including primers, basecoats, and clearcoats, for a professional-grade repair.
• Tcoat Custom-Mix: (Less common, but offers precise custom mixing for hard-to-match colors.)
• Dealership: Your local Ford dealership parts department can order genuine OEM touch-up paint that is guaranteed to match your Ranger's original finish.

How to use touch-up paint

Achieving a seamless touch-up requires a few careful steps:

1. Clean the area: Thoroughly clean the chipped or scratched area with soap and water, then dry it completely. You can also use a wax and grease remover for optimal adhesion.
2. Apply primer (if needed): For deeper scratches that expose bare metal or plastic, apply a thin layer of primer. Allow it to dry completely according to the product instructions.
3. Apply base coat: Shake the touch-up paint thoroughly. Apply thin, even coats of the base color, allowing each coat to dry before applying the next. Build up the color gradually until it matches the surrounding paint. For metallic or pearl colors, ensure the metallic flakes or pearl particles are evenly distributed.
4. Apply clear coat: Once the base coat is dry, apply one or two thin layers of clear coat to protect the paint and restore the shine. Again, allow adequate drying time between coats.
5. Wet sand and polish (optional): For a truly professional finish, you can wet sand the touched-up area with very fine-grit sandpaper (2000-3000 grit) after the clear coat has fully cured, and then polish it to blend seamlessly with the surrounding paint.

Color matching tips for pearls and tri-coats

Many of the modern colors, especially those with "Metallic" in their description, contain metallic flakes or even multiple layers (tri-coats or pearls) to achieve their unique depth and shimmer. Touch-up paint for these colors should be applied with extra care:

• Metallic colors: When applying metallic touch-up paint, try to apply it as evenly as possible to avoid a "blotchy" appearance. The orientation of the metallic flakes can affect how the light reflects, so consistent application is key.
• Pearl and Tri-Coat colors: These colors have multiple layers of paint, often a base color, a mid-coat containing the pearl or metallic effect, and a clear coat. For these, it's even more critical to follow the specific instructions provided with your touch-up paint kit. Achieving a perfect match often involves careful application of each layer to replicate the factory finish. If you have a tri-coat color, be aware that some touch-up kits might only provide two layers, which won't achieve the full depth of the original paint.

Important Note: While we strive to provide accurate information, paint codes can sometimes vary by region or specific vehicle production. To ensure an exact match, it is always recommended to verify your paint code using your VIN at a Ford dealership or a reputable automotive paint supplier. They can provide the most accurate color information for your specific vehicle.

Find a trusted body shop on Repairius.