2020 Honda CR-V - Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Honda CR-V? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 80 / 108 | Star pattern |
| Oil Drain Plug | 30 / 40 | Always replace crush washer |
| Transmission Drain Plug | 36-47 / 49-64 | Automatic transmission (CVT typically lower) |
| Front Brake Caliper Bracket Bolts | 85-110 / 115-149 | |
| Rear Brake Caliper Bracket Bolts | 55-80 / 75-108 | |
| Front Brake Caliper Slide Pins | 18-25 / 25-34 | Always lubricate with high-temp grease |
| Rear Brake Caliper Slide Pins | 18-25 / 25-34 | Always lubricate with high-temp grease |
| Axle Nut (Front) | 180-220 / 244-298 | Use a new nut, stake in place |
| Spark Plugs | 10-14 / 14-19 | For 1.5L and 2.4L engines |
| Valve Cover Bolts | 7-9 / 9-12 | Torque in sequence to prevent warping |
| Intake Manifold Bolts | 14-17 / 19-23 | Torque in sequence |
Wheel lug torque pattern
For the 2020 Honda CR-V, always tighten wheel lug nuts in a star pattern. This ensures the wheel is seated evenly against the hub, preventing warping of the rotor or wheel and potential loosening of the fasteners. After tightening to the specified torque, it's good practice to recheck the torque after 50-100 miles of driving.
Brake torque notes
When working on the brakes of your 2020 Honda CR-V, proper torque is paramount for safety and performance. Always use new hardware where specified, especially for brake caliper bracket bolts. Critical fasteners like these are often designed for single-use to ensure optimal clamping force. When installing brake caliper slide pins, always clean the old grease and apply a high-temperature silicone-based grease to the slide pins and boots. This ensures smooth operation of the caliper and even pad wear, preventing premature brake wear and potential noise issues.
Why torque matters
Properly torquing fasteners is not just a suggestion; it's a critical step in vehicle maintenance and repair that directly impacts safety, reliability, and longevity. Under-torquing can lead to fasteners loosening over time due to vibration, potentially causing parts to separate, fluid leaks, or even catastrophic failure. Imagine a wheel detaching at speed due to loose lug nuts – the consequences can be severe.
Conversely, over-torquing can lead to stretched bolts, stripped threads, or even broken fasteners. This weakens the connection, making it less secure than if it were properly tightened. It can also warp components, like brake rotors or valve covers, leading to costly damage and further repairs. For example, an over-tightened oil drain plug can strip the threads in the oil pan, leading to expensive repairs or even requiring a new oil pan.
Using a calibrated torque wrench is essential for ensuring that every fastener is tightened to the manufacturer's exact specifications. Always follow the specific torque values and sequences provided in the service manual for your 2020 Honda CR-V. This attention to detail ensures that your vehicle operates safely and efficiently, reducing the risk of unexpected breakdowns and costly repairs. While this article provides common torque specifications, critical fasteners should always be verified in the OEM service manual.
Find a trusted shop on Repairius.
More specs for the 2020 Honda CR-V
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2020 Honda CR-V Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.