2015 Honda CR-V Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2015 Honda CR-V? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 80 / 108 | Star/Cross pattern |
| Oil Drain Plug | 29-33 / 39-45 | Always use a new crush washer |
| Transmission Drain Plug | 36 / 49 | Always use a new crush washer |
| Front Brake Caliper Bracket Bolts | 80 / 108 | |
| Rear Brake Caliper Bracket Bolts | 41 / 55 | |
| Brake Caliper Slide Pins | 17-23 / 23-31 | Apply high-temp grease to pins |
| Front Axle Nut | 181 / 245 | Always use a new cotter pin/nut if applicable |
| Spark Plugs | 13-14 / 18-19 | For 2.4L K24Z7 engine |
| Valve Cover Bolts | 8.7 / 12 | |
| Intake Manifold Nuts/Bolts | 16 / 22 | Apply even pressure when tightening |
Wheel lug torque pattern
For your 2015 Honda CR-V, use a star or cross pattern when tightening your wheel lug nuts. This ensures even pressure distribution and prevents rotor warpage. Slowly lower the vehicle and incrementally tighten the lug nuts to the specified torque.
Brake torque notes
When working on the brakes of your 2015 Honda CR-V, precision is key. Always ensure all mating surfaces are clean and free of rust or debris before reassembly. For the caliper slide pins, it's crucial to apply a high-temperature silicone-based grease to ensure smooth operation and prevent seizing. When tightening brake caliper bracket bolts, always make sure to use a good quality torque wrench to achieve the specified values. Over-tightening can strip threads or crack components, while under-tightening can lead to loose parts and potential brake failure. Always check that the brake lines and ABS sensors are properly reconnected and routed after any brake service.
Why torque matters
Proper fastener torque is critical for the safety, reliability, and longevity of your 2015 Honda CR-V. Fasteners that are too loose can vibrate free, leading to catastrophic component failure. Fasteners that are over-tightened can strip threads, deform parts, or even snap, creating a significantly more expensive repair. The specified torque values account for the material, size, and function of each fastener, ensuring that components are held together securely without undue stress. Adhering to these specifications prevents fluid leaks, uneven wear, and ensures that critical safety systems, like your brakes and suspension, operate as designed. Always use a calibrated torque wrench and follow the tightening sequences outlined in the service manual for best results.
Disclaimer: Always consult your official Honda CR-V service manual for the most accurate and up-to-date torque specifications. This information is provided for reference only and should not replace professional advice or procedures.
Find a trusted shop on Repairius.
More specs for the 2015 Honda CR-V
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2015 Honda CR-V Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.