2017 Honda CR-V Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2017 Honda CR-V? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel lug nuts | 80 / 108 | Retorque after 50-100 miles |
| Oil drain plug | 30 / 41 | Use new crush washer |
| Transmission drain plug | 36 / 49 | CVT models |
| Front brake caliper bracket bolts | 79.6 / 108 | |
| Front brake caliper slide pins | 25 / 34 | |
| Rear brake caliper bracket bolts | 41 / 56 | |
| Rear brake caliper slide pins | 17 / 23 | |
| Front axle nut | 181 / 245 | Stake to secure |
| Spark plugs | 16 / 22 | |
| Valve cover bolts | 7.4 / 10 | Tighten in sequence |
| Intake manifold bolts | 16 / 22 |
Wheel lug torque pattern
When tightening the wheel lug nuts on your 2017 Honda CR-V, it is crucial to follow a star or cross pattern. This ensures that the wheel is seated evenly against the hub, preventing warping of the brake rotors and ensuring a secure fit. Start with one lug nut, then tighten the one most directly opposite it. Continue this pattern until all lug nuts are tightened to the initial snug-tight specification, then repeat the pattern to bring them to their final torque value. Do not tighten them in a circular pattern.
Brake torque notes
The torque specifications for brake components are particularly critical. The front and rear brake systems on the 2017 Honda CR-V have different torque values for their caliper bracket bolts and slide pins. This is due to the different sizes and braking forces they handle. The front brakes, which do a majority of the braking, have larger components and thus higher torque requirements. Always ensure you are using the correct specification for the axle you are working on. It is also wise to apply a thin coat of high-temperature brake grease to the caliper slide pins to ensure smooth operation, but be careful not to get any on the braking surfaces.
Why torque matters
Properly torquing fasteners is one of the most critical aspects of vehicle maintenance and repair. A fastener that is too loose can vibrate and fall out, leading to a catastrophic failure. A fastener that is too tight can stretch and deform, weakening it and potentially causing it to break under stress. This is especially true for critical components like wheel lug nuts, brake calipers, and axle nuts. Using a calibrated torque wrench to achieve the manufacturer's specified torque value is the only way to ensure that the clamping force is correct. This not only guarantees the safety of the vehicle but also extends the life of its components.
Disclaimer: The torque specifications provided in this article are for general reference only. It is imperative to consult the official OEM service manual for your specific vehicle before performing any critical repairs. Always verify the correct torque values and tightening procedures to ensure your safety and the longevity of your vehicle.
Find a trusted shop on Repairius.
More specs for the 2017 Honda CR-V
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2017 Honda CR-V Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.