2017 Mercedes-Benz Metris Battery Replacement Guide

Quick Answer

• BCI Group Size: H7/94R
• CCA Rating: 800 CCA (minimum)
• Reserve Capacity: 150-160 minutes
• AGM vs. Flooded: AGM required
• Terminal Layout: Typically reversed (positive on left, negative on right when viewed from front of battery)
• Physical Dimensions (approx.): 12.4" L x 6.9" W x 7.5" H
• Dual-Battery Setup: Not applicable for standard Metris (single battery only)

Replacement Battery Options

Here are some popular replacement options for your 2017 Mercedes-Benz Metris, all of which are AGM batteries:

• Interstate: MT5-H7 (H7 AGM)
• DieHard: Platinum AGM H7
• Odyssey: ODP-AGM94R H7 (PC1350)
• ACDelco: 94RAGM

AGM vs. Flooded — Which Does This Vehicle Need?

The 2017 Mercedes-Benz Metris requires an AGM (Absorbent Glass Mat) battery. Mercedes-Benz vehicles, especially those equipped with start-stop technology, advanced electrical systems, and sensitive electronics, are designed to operate with AGM batteries. Using a traditional flooded lead-acid battery can lead to various issues, including:

• Reduced Battery Life: Flooded batteries are not designed to handle the frequent deep discharges and recharges associated with start-stop systems, leading to premature failure.
• System Malfunctions: The vehicle's sophisticated battery management system (BMS) is calibrated for the characteristics of an AGM battery. Installing a flooded battery can confuse the BMS, leading to improper charging, error codes, and potential malfunctions of electrical components.
• Warranty Void: In some cases, installing an incorrect battery type can void the vehicle's electrical system warranty.

AGM batteries offer superior performance, longer life, and better resistance to vibration compared to flooded batteries, making them the ideal and necessary choice for your Metris.

Post-Installation Relearn / Reset Procedure

After replacing the battery in your 2017 Mercedes-Benz Metris, it's crucial to perform a battery management system (BMS) reset. This procedure informs the vehicle's computer that a new battery has been installed, allowing it to properly monitor and charge the new battery. Failing to do so can lead to suboptimal charging, reduced battery life, and persistent error messages.

The most reliable method for a BMS reset is to use a diagnostic scan tool (such as those used by Mercedes-Benz dealerships or advanced independent shops). The tool will have a specific function to register the new battery. While some generic scan tools may offer this, a Mercedes-specific tool is recommended for full compatibility and accuracy.

Warning: Avoid attempting to "trick" the system by disconnecting the battery for extended periods or using other unverified methods, as this can sometimes lead to additional complications or error codes.

Signs of a Failing Battery

Recognizing the signs of a failing battery can help you proactively replace it before you're left stranded. For your 2017 Mercedes-Benz Metris, critical indicators include:

• Slow Engine Crank: The most common sign. If the engine turns over slowly when you try to start it, the battery may be weak.
• Warning Lights: A battery warning light on your dashboard is a clear indicator of an issue. Other related warning lights, such as for the charging system or electrical issues, might also appear.
• Electronic Malfunctions: Modern vehicles rely heavily on stable voltage. A failing battery can cause erratic behavior in electronic systems like the radio, navigation, power windows, or dashboard displays.
• Corrosion on Terminals: White or bluish powder around the battery terminals can indicate a leak or poor connection, which can hinder the battery's performance.
• Swollen Battery Case: If the battery casing appears swollen or bloated, it's a sign of internal damage, often due to overcharging or extreme heat. This is a hazardous condition.
• Frequent Start/Stop System Malfunctions: If your Metris's start/stop system is consistently failing to engage or disengage correctly, especially in conditions where it normally would, a weak AGM battery is a likely culprit.

Common Battery Issues for This Generation

The 2017 Mercedes-Benz Metris, like many modern vehicles, can experience specific battery-related challenges:

• Premature AGM Battery Failure (If Not Properly Replaced/Maintained): While AGM batteries are robust, improper charging, frequent deep discharges without proper recharging, or environmental factors can shorten their lifespan. Always ensure your vehicle's charging system is functioning correctly.
• Parasitic Draws: Even when the vehicle is off, certain electrical components (e.g., infotainment system, alarms, memory functions) draw small amounts of power. If a component draws too much, it can drain the battery, especially if the vehicle sits unused for extended periods.
• Battery Management System (BMS) Calibration: As mentioned, the BMS is crucial. If it's not reset after a battery replacement or if its sensors malfunction, it can lead to under or overcharging, significantly reducing the new battery's life.
• Terminal Corrosion/Connection Issues: Vibration, especially in a commercial vehicle like the Metris, can sometimes lead to loose or corroded battery terminals, hindering current flow and causing starting problems.

Regular battery checks, ensuring the BMS is properly calibrated, and addressing any electrical issues promptly will help maximize your Metris's battery life.

Find a trusted shop on Repairius.