2017 Mercedes-Benz Metris: Tire Size & Specs

Quick answer

• OEM Tire Size: 235/55R17
• Recommended Cold Tire Pressure (Front/Rear): 44 PSI / 48 PSI (refer to your door placard to confirm)
• Bolt Pattern: 5x112
• Wheel Size: 7Jx17 ET51
• Load Index/Speed Rating: 103H
• Spare Tire Size: Full-size spare 235/55R17
• TPMS Frequency: 433 MHz

Tire sizes by trim

For 2017, the Metris was offered in Cargo and Passenger van configurations. Both trims came standard with the same wheel and tire combination.

Recommended replacement tires

The Mercedes-Benz Metris is a commercial-grade vehicle designed for durability and load-carrying capacity. Replacement tires should be selected to match its intended use. Look for "XL" or "Extra Load" rated tires with a load index of 103 or higher to safely handle the vehicle's gross vehicle weight rating (GVWR).

• $$$ - Michelin Agilis CrossClimate: A premium, all-weather commercial tire known for excellent longevity, traction in all conditions (including light snow), and a quiet, comfortable ride. It’s a top-tier choice for high-mileage drivers and those who prioritize performance and safety.
• $$ - Continental VanContact A/S: A strong performer in the commercial van tire segment. It offers a great balance of durability, all-season traction, and fuel efficiency. It's a reliable OEM-quality replacement that provides confident handling under load.
• $ - Kumho Crugen HT51: A budget-friendly option that doesn't skimp on quality. The HT51 is well-regarded for its long tread life and comfortable ride. It provides dependable all-season performance for delivery, trade, or passenger use.

Lug nut torque & pattern

• Lug Nut Torque: 133 lb-ft (180 Nm)
• Center Bore: 66.6 mm
• Lug Pattern: 5x112

When reinstalling a wheel, tighten the lug bolts in a star pattern to ensure the wheel is seated evenly against the hub. Torque the bolts to the specified 133 lb-ft using a calibrated torque wrench. Do not use an impact wrench for final tightening, as this can lead to over-torquing and potential damage to the wheel, hub, or brake rotor.

Common tire issues for this vehicle

The Metris is a heavy-duty mid-size van, and its weight puts significant demands on its tires. The most common issues are related to improper inflation and vehicle alignment.

• Premature Edge Wear: Due to its tall profile and heavy-duty use, the Metris can be susceptible to accelerated wear on the inner or outer shoulder of the tires. This is often a sign of an alignment issue, specifically with camber or toe settings. Regular alignment checks (at least once a year or every 10,000 miles) are crucial, especially if the van is frequently driven with heavy loads or on rough roads.
• Underinflation: Metris vans have high recommended tire pressures (44/48 PSI). Driving on underinflated tires can cause excessive heat buildup, poor handling, reduced fuel economy, and rapid wear on the outer tire shoulders. The TPMS will alert you to a low-pressure situation, but it's best practice to check pressures manually with a quality gauge at least once a month.
• Impact Damage: As a commercial vehicle, the Metris often encounters curbs, potholes, and job site debris. This increases the risk of sidewall bubbles, cuts, or bent wheels. Always inspect your tires for visible damage after a hard impact.

Need new tires? Find a trusted shop on Repairius.