Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Wheel Alignment Specifications

    2017 Mercedes-Benz Metris - Wheel Alignment Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2017 Mercedes-Benz Metris? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    AngleFront PrefFront RangeRear PrefRear Range
    Camber-0°30'-1°00' to 0°00'-0°50'-1°20' to -0°20'
    Caster8°00'7°30' to 8°30'N/AN/A
    Total Toe0°10'0°00' to 0°20'0°20'0°10' to 0°30'
    Individual Toe0°05'0°00' to 0°10'0°10'0°05' to 0°15'
    SAI11°30'11°00' to 12°00'N/AN/A
    Thrust AngleN/AN/A0°00'-0°15' to 0°15'

    Note: All angle values are given in degrees and minutes.

    Adjustability

    On the 2017 Mercedes-Benz Metris, wheel alignment adjustability is somewhat limited from the factory, especially concerning camber and caster. This is a common characteristic for many Mercedes-Benz commercial vehicles, prioritizing robust design over extensive field adjustability for every angle.

    Front Axle

    • Toe: Front toe is fully adjustable on the Metris. This adjustment is typically made via tie rods, which thread in and out to lengthen or shorten the steering link, thereby changing the toe angle. This is a standard and straightforward adjustment.

    • Camber: Front camber is not factory-adjustable on the 2017 Metris. If your Metris exhibits camber outside the specified range, it often indicates worn suspension components (such as ball joints, control arm bushings, or wheel bearings) or damage to the suspension or chassis. To achieve camber adjustment when no damage or wear is present, aftermarket camber bolts or eccentric bushings may be installed. These specialized components allow for a limited range of positive or negative camber adjustment by altering the mounting position of the strut or control arm.

    • Caster: Similar to camber, front caster is not factory-adjustable on the 2017 Metris. Like camber issues, out-of-spec caster typically points to worn or damaged suspension components. Aftermarket solutions, such as eccentric bushings for control arm mounts or adjustable control arms, are available to correct caster if necessary. However, it's crucial to diagnose the root cause of the caster issue before resorting to aftermarket components.

    • SAI (Steering Axis Inclination): SAI is a non-adjustable

    Need service on your Mercedes-Benz Metris?

    Request service from shops in your area.

    More specs for the 2017 Mercedes-Benz Metris

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email