Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission Fluid & Service

    2025 Mercedes-Benz Metris Transmission Fluid & Service

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2025 Mercedes-Benz Metris? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    • Transmission Make/Model: Mercedes-Benz 9G-TRONIC (725 series)
    • OEM Fluid Spec: Mercedes-Benz ATF 236.15 (also known as MB 236.15)
    • Drain & Fill Capacity: Approximately 5.0 - 6.0 liters (consult service manual for precise value)
    • Full Overhaul Capacity: Approximately 9.0 liters (consult service manual for precise value)
    • Filter OEM Part Number: Verify with Mercedes-Benz dealer or service manual (often sold as a kit with gasket)
    • Recommended Service Interval: 75,000 miles or 7 years, whichever comes first, for normal duty. Severe duty may require shorter intervals.

    Fluid Type Explained

    The 2025 Mercedes-Benz Metris is equipped with the advanced 9G-TRONIC (725 series) automatic transmission. This sophisticated nine-speed automatic transmission requires a very specific fluid to ensure its longevity and optimal performance. The OEM (Original Equipment Manufacturer) fluid specification for this transmission is Mercedes-Benz ATF 236.15. This is a low-viscosity, high-performance fluid engineered to meet the precise demands of the 9G-TRONIC, including its friction characteristics, heat dissipation, and wear protection.

    Using any fluid that does not explicitly meet the MB 236.15 specification can lead to significant transmission problems, such as premature wear of clutch packs, shuddering, shifting issues, and even complete transmission failure. Always double-check the fluid label to ensure it states compliance with MB 236.15. While some aftermarket fluids may claim compatibility, it is always safest to use genuine Mercedes-Benz fluid or an approved equivalent from a reputable brand.

    Service Procedure

    Servicing the 9G-TRONIC transmission typically involves either a "drain and fill" or a "full fluid exchange."

    Drain & Fill

    A drain and fill procedure involves removing the drain plug, allowing the old fluid to drain out, replacing the transmission filter, and then refilling with new fluid. This method replaces only a portion of the total transmission fluid, as a significant amount remains in the torque converter, valve body, and cooler lines. For the 2025 Metris 9G-TRONIC, a drain and fill typically replaces around 5.0 to 6.0 liters of fluid. While simpler, this method effectively dilutes the old fluid with new fluid. It

    Need service on your Mercedes-Benz Metris?

    Request service from shops in your area.

    More specs for the 2025 Mercedes-Benz Metris

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email