2025 Mercedes-Benz Metris Torque Specifications
Key fastener torque specifications for the 2025 Mercedes-Benz Metris
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2025 Mercedes-Benz Metris? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 133 ft-lb / 180 Nm | |
| Oil Drain Plug | 22 ft-lb / 30 Nm | Replace crush washer |
| Transmission Drain Plug | 18 ft-lb / 24 Nm | Verify fluid type and level |
| Front Brake Caliper Bracket Bolts | 207 ft-lb / 280 Nm | |
| Front Brake Caliper Slide Pins | 41 ft-lb / 55 Nm | Lubricate pins |
| Rear Brake Caliper Bracket Bolts | 118 ft-lb / 160 Nm | |
| Rear Brake Caliper Slide Pins | 41 ft-lb / 55 Nm | Lubricate pins |
| Axle Nut (Front) | 162 ft-lb + 90° | Use new nut, tighten to 162 ft-lb then turn an additional 90 degrees |
| Spark Plugs | 17 ft-lb / 23 Nm | |
| Valve Cover Bolts | 7 ft-lb / 9 Nm | Tighten in sequence |
Wheel Lug Torque Pattern
When tightening the wheel lug nuts, it is crucial to follow a star or cross pattern. This ensures the wheel is seated evenly against the hub, preventing warping and ensuring safety. Start by snugging all lug nuts by hand, then use a torque wrench to tighten them in the star pattern to the specified 133 ft-lb (180 Nm).
Brake Torque Notes
Brake system fasteners are critical to your safety. The front brake caliper bracket bolts require a very high torque value (207 ft-lb / 280 Nm) and must be tightened precisely to prevent failure. Caliper slide pins require a much lower torque; over-tightening can cause the pins to bind, leading to uneven pad wear and poor braking performance. Always use a calibrated torque wrench for these components.
Why Torque Matters
Using a torque wrench to tighten fasteners to their specified values is one of the most important aspects of automotive repair. Over-tightening a bolt can stretch it beyond its designed limits, causing it to fail or break. It can also damage the threads in the component it is screwed into, leading to costly repairs. Under-tightening is equally dangerous, as fasteners can loosen over time due to vibration and road shock, potentially causing a component like a wheel or brake caliper to detach from the vehicle. Proper torque ensures that every bolt is applying the correct clamping force to do its job safely and effectively.
Disclaimer: These torque specifications are provided for reference purposes only. Values can vary based on specific submodels and equipment. Always verify critical fastener torque specs in the official OEM service manual for your vehicle before beginning any repairs.
Find a trusted shop on Repairius.
More specs for the 2025 Mercedes-Benz Metris
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2025 Mercedes-Benz Metris Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.