Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2025 Mercedes-Benz Metris Oil Capacity & Filter

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2025 Mercedes-Benz Metris? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2025 Mercedes-Benz Metris with the 2.0L M274 turbocharged four-cylinder engine requires 7.4 quarts (7.0 liters) of synthetic oil.

    Quick Answer

    • Oil Capacity: 7.4 quarts (7.0 liters)
    • Recommended Oil Weight: 5W-30 or 0W-30
    • Oil Specification: MB 229.5
    • Oil Filter (OEM): A2701800109
    • Oil Filter (Aftermarket):
      • Fram: Consult dealer
      • Wix: WL10421
      • Mobil 1: Consult dealer

    Capacity by Engine Option

    For the 2025 model year in North America, the Metris is available with a single engine option.

    EngineOil Capacity (quarts)Oil Capacity (liters)
    2.0L M274 I-47.47.0

    Oil Change Interval

    Mercedes-Benz recommends an oil change interval of up to 15,000 miles or 1 year, whichever comes first. However, this can vary based on driving habits.

    • Normal Duty: 15,000 miles / 1 year.
    • Severe Duty: For vehicles used for towing, frequent short trips, or in dusty conditions, it is recommended to change the oil more frequently, such as every 7,500-10,000 miles.

    Drain Plug Torque

    The oil drain plug should be torqued to 22 lb-ft (30 Nm). It is also recommended to replace the crush washer with each oil change to prevent leaks.

    How to Change the Oil

    1. Warm up the engine to allow the oil to drain more easily.
    2. Safely raise the vehicle.
    3. Remove the drain plug and allow the old oil to drain completely.
    4. Replace the oil filter.
    5. Install the new crush washer and drain plug, torquing it to 22 lb-ft.
    6. Add 7.4 quarts of MB 229.5-spec synthetic oil.
    7. Start the engine, check for leaks, and then verify the oil level.

    Common Issues / Tips

    The M274 is a reliable engine, but some owners have reported issues with the camshaft position sensors. This is not directly related to oil changes but is something to be aware of. When changing the oil, be sure to use a high-quality filter and the correct-spec oil to ensure long engine life.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Mercedes-Benz Metris?

    Request service from shops in your area.

    More specs for the 2025 Mercedes-Benz Metris

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email