Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Brake Pad & Rotor Specs

    2025 Mercedes-Benz Metris – Brake Pad & Rotor Specs

    Your go-to guide for 2025 Metris brake pad & rotor specifications.

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2025 Mercedes-Benz Metris? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    SpecificationFrontRear
    Pad PN (OEM)Verify with dealerVerify with dealer
    Pad PN (Akebono)ACT1890 (ProACT Ceramic)ACT1794 (ProACT Ceramic)
    Pad PN (Bosch)BP1890 (QuietCast Premium Ceramic)BP1794 (QuietCast Premium Ceramic)
    Pad PN (Wagner)OEX1890 (OEX Ceramic)QC1794 (QuickStop Ceramic)
    Pad PN (Power Stop)17-1890 (Evolution Ceramic)17-1794 (Evolution Ceramic)
    Rotor Diameter300 mm296 mm
    New Thickness28 mm12 mm
    Minimum Thickness25 mm10 mm
    Caliper Piston Count21
    Caliper Bracket Torque180 Nm (133 ft-lbs)115 Nm (85 ft-lbs)
    Caliper Slide-Pin Torque30 Nm (22 ft-lbs)30 Nm (22 ft-lbs)
    Brake Fluid SpecDOT 4 (or DOT 5.1 compatible)DOT 4 (or DOT 5.1 compatible)

    How to Choose Pads

    Choosing the right brake pads for your 2025 Mercedes-Benz Metris depends on your driving habits and priorities. Here's a breakdown of common pad types:

    • Ceramic Pads: These are an excellent all-around choice for the Metris. They offer quiet operation, low dust production, and consistent performance across a wide range of temperatures. Ceramic pads are a great option for daily driving and light-duty commercial use, providing a good balance of stopping power and longevity.

    • Semi-Metallic Pads: Often found as original equipment on many vehicles, semi-metallic pads provide strong initial bite and good stopping power, especially in heavy-duty situations. They tend to be more abrasive, which can lead to increased rotor wear and higher dust levels compared to ceramic pads. However, for Metris vans frequently carrying heavy loads or operating in demanding conditions, semi-metallic pads can offer a robust braking solution.

    • Heavy-Duty (HD) Pads: For Metris vans used for specific commercial applications involving frequent heavy loads, towing, or aggressive driving, heavy-duty pads might be considered. These pads are designed for extreme braking performance and heat dissipation. They typically come with a trade-off of increased noise and dust, and potentially quicker rotor wear. It's crucial to ensure any HD pad choice is specifically designed for the Metris and its braking system to avoid unforeseen issues.

    For most 2025 Metris owners, high-quality ceramic pads from reputable aftermarket brands like Akebono, Bosch, Wagner, or Power Stop will provide excellent performance, comfort, and durability.

    Typical Service Life

    The service life of brake pads and rotors on your 2025 Mercedes-Benz Metris can vary significantly based on driving style, load, and operating conditions. On average, you can expect:

    • Front Brake Pads: 30,000 to 60,000 miles
    • Rear Brake Pads: 40,000 to 80,000 miles (often last longer than front pads due to less braking force distribution)
    • Rotors: Typically, rotors should be replaced when pads are replaced, especially if they are close to or below the minimum thickness specification, or show signs of warping, severe scoring, or cracking.

    Mercedes-Benz recommends regular brake inspections as part of its scheduled maintenance. During these inspections, your technician will check pad thickness, rotor condition, and overall brake system health. It is often recommended to

    Need service on your Mercedes-Benz Metris?

    Request service from shops in your area.

    More specs for the 2025 Mercedes-Benz Metris

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email