2017 Toyota Camry Bulb Sizes

Quick reference

LED vs halogen upgrade considerations

When upgrading from halogen to LED bulbs, there are a few things to keep in mind. First, you may encounter CANBUS errors. This is because LED bulbs draw less power than halogen bulbs, which can cause the car's computer to think that a bulb is burned out. To fix this, you will need to install a CANBUS adapter. Second, you may need to install an adapter to get the LED bulb to fit properly in the housing. This is because LED bulbs are often a different size and shape than halogen bulbs.

How to replace each bulb

• Headlight (Low Beam): The low beam bulb is located in the inner headlight housing. To replace it, you will need to remove the headlight housing from the car. Once the housing is removed, you can access the bulb from the back.
• Headlight (High Beam): The high beam bulb is located in the outer headlight housing. To replace it, you will need to remove the headlight housing from the car. Once the housing is removed, you can access the bulb from the back.
• Fog Light: The fog light bulb is located in the fog light housing. To replace it, you will need to remove the fog light housing from the car. Once the housing is removed, you can access the bulb from the back.
• Daytime Running Light: The daytime running light is a LED unit and is not designed to be replaced. If it burns out, you will need to replace the entire headlight assembly.
• Front Turn Signal: The front turn signal bulb is located in the headlight housing. To replace it, you will need to remove the headlight housing from the car. Once the housing is removed, you can access the bulb from the back.
• Rear Turn Signal: The rear turn signal bulb is located in the tail light housing. To replace it, you will need to remove the tail light housing from the car. Once the housing is removed, you can access the bulb from the back.
• Brake Light: The brake light bulb is located in the tail light housing. To replace it, you will need to remove the tail light housing from the car. Once the housing is removed, you can access the bulb from the back.
• Tail Light: The tail light bulb is located in the tail light housing. To replace it, you will need to remove the tail light housing from the car. Once the housing is removed, you can access the bulb from the back.
• Reverse Light: The reverse light bulb is located in the tail light housing. To replace it, you will need to remove the tail light housing from the car. Once the housing is removed, you can access the bulb from the back.
• License Plate: The license plate bulb is located in the license plate light housing. To replace it, you will need to remove the license plate light housing from the car. Once the housing is removed, you can access the bulb from the back.
• Side Marker: The side marker bulb is located in the side marker light housing. To replace it, you will need to remove the side marker light housing from the car. Once the housing is removed, you can access the bulb from the back.
• Dome Light: The dome light bulb is located in the dome light housing. To replace it, you will need to pry the dome light lens off with a small, flat-head screwdriver. Once the lens is removed, you can access the bulb.
• Map Light: The map light bulb is located in the map light housing. To replace it, you will need to pry the map light lens off with a small, flat-head screwdriver. Once the lens is removed, you can access the bulb.

Common lighting issues for this generation

One of the most common lighting issues for the 2017 Toyota Camry is premature burnout of the headlight bulbs. This is due to the fact that the headlight housings are not well-ventilated, which can cause the bulbs to overheat and burn out prematurely. To fix this, you can try to improve the ventilation of the headlight housings by drilling small holes in the back of the housings.

Find a trusted shop on Repairius.