2018 Toyota Camry Bulb Sizes
Your complete guide to the 2018 Toyota Camry bulb sizes.
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2018 Toyota Camry? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Location | Bulb Size | Type |
|---|---|---|
| Low Beam Headlight | H11 | Halogen |
| High Beam Headlight | 9005 | Halogen |
| Fog Light | H11 | Halogen |
| Daytime Running Light | LED | LED |
| Front Turn Signal | 7444NA | Halogen |
| Rear Turn Signal | 7440 | Halogen |
| Brake Light | 7440 | Halogen |
| Tail Light | LED | LED |
| Reverse Light | 921 | Halogen |
| License Plate | 168 | Halogen |
| Side Marker Light | 168 | Halogen |
| Dome/Map Light | DE3175 | Halogen |
LED vs halogen upgrade considerations
When upgrading from halogen to LED bulbs, there are a few things to keep in mind. First, you may need a CANBUS-compatible bulb to avoid "bulb out" warnings on your dashboard. Second, you may need an adapter to fit the new bulb into the housing. Third, you may need to adjust the beam pattern to avoid blinding other drivers.
How to replace each bulb
- Low Beam Headlight: The low beam headlight is located in the front of the car, on the driver's side. To replace it, you will need to remove the headlight housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- High Beam Headlight: The high beam headlight is located in the front of the car, on the passenger's side. To replace it, you will need to remove the headlight housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- Fog Light: The fog light is located in the front of the car, on the driver's side. To replace it, you will need to remove the fog light housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- Daytime Running Light: The daytime running light is located in the front of the car, on the driver's side. To replace it, you will need to remove the headlight housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- Front Turn Signal: The front turn signal is located in the front of the car, on the driver's side. To replace it, you will need to remove the headlight housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- Rear Turn Signal: The rear turn signal is located in the back of the car, on the driver's side. To replace it, you will need to remove the tail light housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- Brake Light: The brake light is located in the back of the car, on the driver's side. To replace it, you will need to remove the tail light housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- Tail Light: The tail light is located in the back of the car, on the driver's side. To replace it, you will need to remove the tail light housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- Reverse Light: The reverse light is located in the back of the car, on the driver's side. To replace it, you will need to remove the tail light housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- License Plate: The license plate light is located in the back of the car, on the driver's side. To replace it, you will need to remove the license plate light housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- Side Marker Light: The side marker light is located in the front of the car, on the driver's side. To replace it, you will need to remove the headlight housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
- Dome/Map Light: The dome/map light is located in the ceiling of the car. To replace it, you will need to remove the dome/map light housing. The bulb is held in place by a retaining clip. Once the clip is removed, the bulb can be pulled out and replaced.
Common lighting issues for this generation
The most common lighting issue for this generation of Camry is a burnt-out headlight. This can be caused by a number of factors, including a bad bulb, a loose connection, or a problem with the headlight housing. If you have a burnt-out headlight, it is important to have it replaced as soon as possible to avoid a ticket.
Find a trusted shop on Repairius.
More specs for the 2018 Toyota Camry
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Toyota Camry Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.