2018 Toyota Camry Tire Size, Pressure & Wheel Specs
An ASE master tech's complete guide to tire sizes, pressures, lug nut torque, and wheel specs for the 2018 Toyota Camry.
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2018 Toyota Camry? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
As an ASE-certified master technician, I’ve serviced countless Toyota sedans over the years. The 2018 Toyota Camry marked the beginning of the highly praised eighth generation, bringing a sportier stance and larger wheel options to the lineup. Having the right tires and keeping them at the correct pressure is critical to maximizing the Camry's excellent fuel economy and ensuring a safe, smooth ride.
Below is your comprehensive tire and wheel specification guide for the 2018 Toyota Camry.
Quick answer
If you're in a hurry, here are the baseline specifications for the 2018 Toyota Camry:
- OEM tire size: 205/65R16, 215/55R17, 235/45R18, or 235/40R19 (depending on trim)
- Recommended cold tire pressure: 35 PSI front / 35 PSI rear (check door jamb placard for your specific trim)
- Bolt pattern: 5x114.3 (also known as 5x4.5")
- Wheel size & offset: 16x6.5 to 19x8.0; offset ranges from +40mm to +50mm
- Load index/speed rating: 94V to 98V (typically 94V for 17-inch, 95V for 16-inch, 96V for 19-inch)
- Spare tire size: T155/70D17 (Compact temporary spare)
- TPMS frequency: 315 MHz or 433 MHz (dependent on manufacturing plant; always scan your sensors to verify before replacement)
Tire sizes by trim
Toyota offered a wide variety of wheel sizes across the 2018 Camry lineup, ranging from standard 16-inch steel wheels on base models to 19-inch alloys on the sporty XSE.
| Trim Level | OEM Tire Size | Wheel Size | Recommended Pressure (Front/Rear) |
|---|---|---|---|
| L | 205/65R16 | 16x6.5 | 35 PSI / 35 PSI |
| LE / LE Hybrid | 215/55R17 | 17x7.5 | 35 PSI / 35 PSI |
| SE / XLE / XLE Hybrid | 235/45R18 | 18x8.0 | 35 PSI / 35 PSI |
| XSE (4-Cyl & V6) | 235/40R19 | 19x8.0 | 35 PSI / 35 PSI |
Note: Always verify your specific pressure on the driver's side door jamb placard, as hybrid variants may have slight deviations depending on installed options.
Recommended replacement tires
When your 2018 Camry needs new rubber, I highly recommend touring or grand-touring all-season tires to match the vehicle's comfortable highway ride. Here are a few technician-approved choices:
- Premium Tier: Michelin Defender2 — Incredible tread life and exceptional wet braking performance. Perfect for high-mileage commuters.
- Mid-Range Tier: Continental TrueContact Tour — Excellent balance of ride comfort, low road noise, and reliable all-season traction.
- Value Tier: General AltiMAX RT43 or RT45 — A fantastic budget-friendly option that punches above its weight class in winter traction and durability.
When to inflate to max load psi
Because the 2018 Toyota Camry is a mid-size passenger sedan and not a Heavy-Duty (HD) truck, you will never need to inflate your tires to the "Max Press" listed on the tire's sidewall. The maximum pressure listed on the tire (often 44 or 51 PSI) is the structural limit of the tire itself, not the optimal operating pressure. Always inflate your tires to the 35 PSI recommended by Toyota on the driver's door placard to ensure proper tread wear, handling, and braking distances.
Lug nut torque & pattern
Whenever you are changing a flat, rotating tires, or reinstalling a wheel after brake work, proper torque is essential to prevent warped brake rotors or loose wheels.
- Bolt Pattern: 5x114.3 mm (5x4.5 inches)
- Lug Nut Torque: 76 lb-ft (103 Nm)
Tech tip: Always tighten your lug nuts in a star (crisscross) pattern and use a calibrated torque wrench. Do not use an impact gun to perform the final tightening.
Common tire issues for this vehicle
While the 2018 Camry is incredibly reliable, there are a few tire-related quirks to watch out for:
- Low-Profile Pothole Damage: The XSE trims equipped with 235/40R19 tires have very little sidewall cushioning. These are highly susceptible to pinch-flats, sidewall bubbling, and bent alloy wheels if you hit a deep pothole at speed.
- TPMS Sensor Battery Drain: As these vehicles age past the 5-7 year mark, the internal batteries in the TPMS sensors begin to die. If your TPMS light blinks for a minute when you start the car and then stays solid, you likely have a dead sensor.
- Inner Edge Wear: If the vehicle's rear camber/toe is out of specification—common if the vehicle is frequently loaded with heavy cargo—you may notice accelerated wear on the inner edges of the rear tires. Regular alignments and tire rotations every 5,000 to 7,500 miles are key.
Need new tires? Find a trusted shop on Repairius.
More specs for the 2018 Toyota Camry
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Toyota Camry Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.