2018 Toyota Camry Battery: Group Size, CCA & Replacement Guide
Your complete guide to the 2018 Toyota Camry battery. Find the right group size, CCA, and replacement battery for your Camry, and learn the post-installation relearn procedure.
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2018 Toyota Camry? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick answer
- BCI Group Size: H6 / 48
- Cold Cranking Amps (CCA): 740 CCA is the OE spec, but a good quality replacement will be in the 700-800 CCA range.
- Reserve Capacity (RC): A battery with a reserve capacity of 120-140 minutes is recommended.
- AGM vs. Flooded: An AGM (Absorbent Glass Mat) battery is required for the 2018 Toyota Camry. Using a conventional flooded battery will result in poor performance and a short lifespan.
- Terminal Layout: The 2018 Camry uses a standard top post terminal layout with the positive terminal on the right.
- Physical Dimensions: The approximate dimensions of a Group H6/48 battery are: 10.9 inches (L) x 6.9 inches (W) x 7.5 inches (H).
- Dual-battery setup: The 2018 Toyota Camry is not available with a diesel engine and does not have a dual-battery setup.
Replacement battery options
When it comes time to replace the battery in your 2018 Toyota Camry, it is crucial to choose a high-quality AGM battery that meets or exceeds the original equipment specifications. Here are a few popular and reliable replacement options:
- Interstate MTX-48/H6: A direct-fit AGM replacement that is a popular choice for its reliability and performance.
- Optima YellowTop DH6: A high-performance AGM battery that is ideal for vehicles with high electrical demands.
- DieHard Platinum AGM Battery, Group Size H6: A premium AGM battery that provides excellent starting power and a long lifespan.
- Odyssey Performance Series ODP-AGM48 H6 L3: A heavy-duty AGM battery that is built to withstand extreme conditions and provide a long service life.
- ACDelco Gold 48AGM: A top-quality AGM battery that is a trusted choice for many professional technicians.
AGM vs flooded — which does this vehicle need?
The 2018 Toyota Camry is equipped with a lot of modern electronics, and many models feature start-stop technology. These systems put a high demand on the battery, and a conventional flooded battery is not up to the task. The 2018 Camry requires an AGM (Absorbent Glass Mat) battery. AGM batteries are designed to handle the deep cycling and high electrical loads of modern vehicles. They are also more resistant to vibration and are spill-proof, making them a safer and more reliable option.
Using a conventional flooded battery in a 2018 Camry will result in a significantly shorter lifespan and may cause issues with the vehicle's electrical systems. To ensure the best performance and longevity, it is essential to use a high-quality AGM battery.
Post-installation relearn / reset procedure
After replacing the battery in your 2018 Toyota Camry, you may need to perform a few simple relearn procedures to get everything back to normal. The most common is to reset the power windows' auto up/down feature. To do this, simply roll each window all the way down and then all the way up, holding the switch for a few seconds in each direction. You may also notice that the engine idle is a little erratic for the first few miles of driving. This is normal as the engine's computer relearns its ideal idle speed. Driving the vehicle for a few miles at various speeds will allow the system to recalibrate.
Signs of a failing battery
A failing battery can leave you stranded, so it is important to know the signs of a battery that is on its way out. Here are a few things to look out for:
- Slow engine crank: If the engine seems to turn over more slowly than usual when you start it, it could be a sign of a weak battery.
- Clicking sound when starting: A rapid clicking sound when you turn the key is a classic sign of a battery that does not have enough power to turn the engine over.
- Dimming lights: If your headlights dim when you start the engine or when the engine is at idle, it could be a sign that the battery is not holding a full charge.
- Warning lights: A battery or check engine light on the dashboard can indicate a problem with the battery or charging system.
- Swollen or leaking battery case: If you notice that the battery case is swollen or that there is corrosion around the terminals, it is a sign that the battery is damaged and needs to be replaced.
- Age: Most car batteries have a lifespan of 3-5 years. If your battery is older than that, it is a good idea to have it tested.
Common battery issues for this generation
The 2018 Toyota Camry is a very reliable vehicle, but like any modern car, it has a high electrical demand that can be tough on the battery. One of the most common issues is premature battery failure due to the use of an incorrect or low-quality battery. It is also important to make sure that the battery terminals are clean and tight, as loose or corroded terminals can cause a variety of electrical problems.
Another issue that can affect any modern vehicle is parasitic drain. This is when an electrical component continues to draw power from the battery even when the vehicle is turned off. If you are experiencing a battery that dies repeatedly, it is a good idea to have a professional technician perform a parasitic draw test.
Find a trusted shop on Repairius.
More specs for the 2018 Toyota Camry
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Toyota Camry Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.