2020 Toyota Camry Battery Size & Group
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Toyota Camry? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Answer
- BCI Group Size: 24F
- CCA Rating: 585-700 CCA (depending on specific model/engine)
- Reserve Capacity: 100-120 minutes (depending on specific model/engine)
- AGM vs. Flooded: Comes with a flooded battery, but an AGM battery is a suitable upgrade.
- Terminal Layout: Top Post (SAE terminals)
- Physical Dimensions (Group 24F): Approximately 10.25" (L) x 6.81" (W) x 8.88" (H)
- Dual-Battery Setup: Not applicable (not a diesel vehicle)
Replacement Battery Options
- Interstate: MT5-24F or MTZ-24F (AGM)
- Optima: YellowTop D35 (Note: Group 35 is slightly smaller than 24F but often fits and works. Verify fitment before purchase.)
- DieHard: 38229 (Platinum AGM) or 38186 (Gold Flooded)
- Odyssey: 24F-700 or ODP-AGM24F (AGM)
AGM vs. Flooded — Which Does This Vehicle Need?
The 2020 Toyota Camry comes from the factory with a conventional flooded lead-acid battery. These batteries are reliable and generally less expensive. However, upgrading to an Absorbed Glass Mat (AGM) battery is often a good choice and is fully compatible with your Camry's charging system.
AGM batteries offer several advantages:
- Improved Durability: They are more resistant to vibration and impacts, making them a good option for varying road conditions.
- Longer Lifespan: While more expensive upfront, AGM batteries often last longer than flooded batteries, potentially saving you money in the long run.
- Maintenance-Free: Unlike flooded batteries, AGMs are sealed and do not require water top-offs.
- Better Performance: They generally deliver more consistent power, especially in extreme temperatures, and are better suited for vehicles with more electrical demands (e.g., stop-start systems, which some Camry models have).
For the 2020 Camry, either a high-quality flooded battery or an AGM battery will work well. If your Camry has the stop-start feature, an AGM battery is highly recommended, as these systems place more stress on the battery.
Post-Installation Relearn / Reset Procedure
After replacing the battery in your 2020 Toyota Camry, you may experience some minor issues that require a simple reset or relearn procedure. This is common as the vehicle's computer (ECU) may lose some learned settings when power is disconnected. Here are the most common things to address:
- Power Windows: The automatic up/down function for your power windows might not work initially. To reset, roll each window all the way down, then all the way up, holding the button for a few extra seconds at each extreme. Repeat for all windows.
- Radio/Navigation Settings: You will likely lose your preset radio stations and navigation history. Simply reprogram your favorite stations and destinations.
- Clock: The clock will need to be reset to the correct time.
- Idle Relearn: The engine's idle speed might be slightly erratic for the first few drives. This usually self-corrects after driving the vehicle for a short period (10-20 minutes) as the ECU re-learns optimal idle parameters. If not, some technicians recommend turning on the headlights and AC/heater fan for 10 minutes with the car running after a battery replacement to help the ECU relearn its idle strategy.
- Steering Angle Sensor (if applicable): In some vehicles, disconnecting the battery can affect the steering angle sensor calibration. If you notice any stability control (VSC) or ABS warning lights, driving the vehicle straight for a short distance at a moderate speed (around 20-30 mph) should recalibrate it. If not, a professional scan tool might be needed.
- Tire Pressure Monitoring System (TPMS): The TPMS light might illuminate. Drive the vehicle for a few miles; it should reset on its own. Ensure tire pressures are correct.
There is typically no complex "relearn" procedure required with a scan tool for basic battery replacement in a 2020 Toyota Camry, unlike some European vehicles. Most systems will self-correct or are easily reset manually.
Signs of a Failing Battery
Recognizing the signs of a dying battery can save you from being stranded. Here’s what to look out for:
- Slow Engine Crank: The most common sign. If your engine cranks slowly or struggles to turn over, especially in cold weather, your battery is likely on its way out.
- Dim Headlights/Interior Lights: If your lights appear dim when the engine is off but brighten when the engine is running, it indicates a weak battery.
- Warning Lights: A battery warning light on your dashboard, or sometimes a check engine light, can indicate battery or charging system issues.
- Corrosion: Fuzzy, blue, or white corrosion around the battery terminals can impede current flow and is a sign of neglect or a leaky battery.
- Swollen Battery Case: If the battery case appears swollen or bloated, especially on the sides or top, it
More specs for the 2020 Toyota Camry
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2020 Toyota Camry Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.