2018 Toyota Tacoma Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2018 Toyota Tacoma? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel lug nuts | 83 ft-lb / 113 Nm | |
| Oil drain plug | 30 ft-lb / 41 Nm | Apply new gasket |
| Transmission drain plug | 37 ft-lb / 50 Nm | Apply new gasket |
| Front brake caliper bracket bolts | 74 ft-lb / 100 Nm | |
| Front brake caliper slide pins | 25 ft-lb / 34 Nm | |
| Rear brake caliper bracket bolts | 58 ft-lb / 79 Nm | |
| Rear brake caliper slide pins | 20 ft-lb / 27 Nm | |
| Axle nut | 173 ft-lb / 235 Nm | Use new cotter pin |
| Spark plugs | 15 ft-lb / 20 Nm | |
| Valve cover bolts | 10 ft-lb / 14 Nm | |
| Intake manifold bolts | 21 ft-lb / 28 Nm |
Wheel lug torque pattern
When tightening the wheel lug nuts on your 2018 Toyota Tacoma, it's crucial to follow a star or cross pattern. This ensures the wheel is seated evenly against the hub, preventing vibration and ensuring the wheel runs true. Start with one lug nut, then tighten the one directly across from it. Move to the next lug nut and tighten the one across from it, continuing until all lug nuts are snug. Then, in the same pattern, torque them to their final specification.
Brake torque notes
Proper torque on brake components is a critical safety measure. The caliper bracket bolts are under significant stress during braking, and incorrect torque can lead to catastrophic failure. Caliper slide pins, if too loose, can cause rattling and uneven pad wear. If too tight, they can bind, causing the brakes to drag or wear unevenly. Always use a calibrated torque wrench for these critical fasteners.
Why torque matters
Torque is the rotational equivalent of force. Applying the correct torque to a fastener ensures it is tight enough to hold the component securely, but not so tight that it stretches the bolt, damages the component, or makes it difficult to remove later. Over-tightening can lead to stripped threads, broken bolts, and warped components. Under-tightening can cause parts to loosen over time, leading to rattles, vibrations, and potential failure. Using a torque wrench is the only way to ensure fasteners are tightened to the manufacturer's specifications.
Disclaimer: The torque specifications listed above are for reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle configuration.
Find a trusted shop on Repairius.
More specs for the 2018 Toyota Tacoma
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Toyota Tacoma Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.