Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Serpentine Belt Routing & Length

    2017 Honda Accord Serpentine Belt: Routing & Replacement Guide

    Everything on this vehicle

    Your comprehensive guide to the serpentine belt system on the 2017 Honda Accord, including routing, part numbers, and replacement tips.

    Working on this 2017 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    For the 2017 Honda Accord with the 2.4L 4-cylinder engine, here are the essential details for your serpentine belt:

    • Belt Length: 85.0 inches (2160 mm)
    • Rib Count: 6-rib
    • OEM Belt PN: 31110-5A2-A02
    • Aftermarket Cross-references:
      • Gates K060850
      • Dayco 5060850
      • Continental Elite 4060850
    • Auto-Tensioner PN: 31170-5A2-A01
    • Idler Pulley PN: 31180-5A2-A01

    For the 2017 Honda Accord with the 3.5L V6 engine, here are the essential details for your serpentine belt:

    • Belt Length: 78.7 inches (2000 mm)
    • Rib Count: 6-rib
    • OEM Belt PN: 31110-5G0-A01
    • Aftermarket Cross-references:
      • Gates K060787
      • Dayco 5060787
      • Continental Elite 4060787
    • Auto-Tensioner PN: 31170-RK2-A01
    • Idler Pulley PN: 31180-R70-A01

    Belt Routing

    Always take a clear photograph of your existing serpentine belt routing before you begin any removal process. This will serve as an invaluable reference during reinstallation.

    2.4L 4-Cylinder Engine Routing:

    Starting from the crankshaft pulley (the lowest, largest pulley at the front of the engine):

    1. From the crankshaft pulley, the belt goes up and to the left to the A/C compressor pulley.
    2. From the A/C compressor, the belt goes up and to the right to wrap around the idler pulley (a smooth, non-grooved pulley).
    3. From the idler pulley, the belt then travels slightly down and to the right to the alternator pulley.
    4. From the alternator, the belt goes down and to the left to the power steering pump pulley.
    5. From the power steering pump, the belt continues downward to the water pump pulley.
    6. Finally, from the water pump, the belt goes left to the groove side of the automatic tensioner pulley. The ribbed side of the belt will be on all accessory pulleys, while the smooth (back) side typically contacts the idler and tensioner pulleys.

    3.5L V6 Engine Routing:

    Starting from the crankshaft pulley (the lowest, largest pulley at the front of the engine):

    1. From the crankshaft pulley, the belt runs up and to the left to the A/C compressor pulley.
    2. From the A/C compressor, the belt continues up and to the right to the alternator pulley.
    3. From the alternator, the belt goes down and to the left to the power steering pump pulley.
    4. From the power steering pump, the belt travels down and to the right to the water pump pulley.
    5. Finally, from the water pump, the belt goes up and to the left to wrap around the smooth side of the automatic tensioner pulley. As with the 4-cylinder, the ribbed side engages the accessory pulleys, and the smooth side typically contacts the tensioner.

    How to Replace the Serpentine Belt

    Replacing the serpentine belt on your 2017 Honda Accord is a manageable DIY task for those with some mechanical experience. You will need a serpentine belt tool or a long 3/8-inch drive breaker bar / ratchet.

    1. Safety First: Ensure the engine is cool and the car is off. Disconnect the negative terminal of the battery as a precaution.
    2. Locate the Tensioner: Identify the automatic belt tensioner. It will have a square opening, typically 3/8-inch or 1/2-inch, designed to accept a breaker bar or serpentine belt tool.
    3. Relieve Tension: Insert your breaker bar or serpentine belt tool into the square opening of the tensioner. Apply steady, counter-clockwise (or clockwise, depending on the engine) pressure to rotate the tensioner arm and relieve the belt tension. This will allow you to slip the belt off one of the pulleys.
    4. Remove Old Belt: Once tension is relieved, carefully slip the old belt off one of the pulleys (e.g., the alternator or idler pulley) and then fully remove it from all other pulleys.
    5. Inspect Pulleys: While the belt is off, take this opportunity to inspect all pulleys for any signs of wear, damage, or excessive play. Spin each pulley by hand; they should spin smoothly with no wobble or grinding noises. If any pulley feels rough or has excessive play, it's a good idea to replace it.
    6. Route New Belt: Refer to the photograph you took earlier and the routing descriptions above. Carefully route the new serpentine belt around all the pulleys, leaving one pulley (usually the tensioner or an idler) for last, where you can easily slip the belt on once tension is relieved.
    7. Apply Tension: Again, use your breaker bar or serpentine belt tool to rotate the tensioner and relieve tension. Slip the new belt onto the final pulley. Slowly release the tensioner, ensuring the belt seats properly in all the grooves of every pulley.
    8. Double-Check: Before starting the engine, visually inspect the entire belt path to ensure it is correctly seated on all pulleys and not twisted or misaligned.
    9. Start Engine: Start the engine and let it run for a minute or two. Observe the belt's operation to ensure it runs smoothly without any squealing or unusual noises. Turn the engine off and re-check the belt routing and tensioner position.

    Replacement Interval

    Honda generally recommends inspecting the serpentine belt during routine maintenance. While there isn't a strict mileage-based replacement interval like a timing belt, a good rule of thumb is to consider replacement every 60,000 to 100,000 miles, or if visual inspection reveals significant wear. However, environmental factors and driving conditions can affect its lifespan. Always inspect the belt for cracks, fraying, or glazing during oil changes or other service.

    Signs of a Failing Belt or Tensioner

    Ignoring a failing serpentine belt or tensioner can lead to a breakdown, as critical accessories like the alternator, power steering pump, and A/C compressor will stop functioning. Here are the warning signs:

    • Squealing Noises: A persistent squealing or chirping noise, especially upon cold start, acceleration, or turning, is a classic sign of a worn or improperly tensioned belt. This can also indicate a failing pulley bearing.
    • Visible Cracks or Fraying: Inspect the belt's ribbed surface and edges. If you see numerous small cracks, chunks missing, or fraying along the edges, it's time for replacement.
    • Glazed or Shiny Belt: A belt that appears shiny or glazed on the ribbed side may not be gripping the pulleys effectively, leading to slipping.
    • Loss of Power Steering: If your power steering suddenly becomes stiff and difficult to turn, the serpentine belt may have broken or slipped off the power steering pump pulley.
    • Battery Warning Light: Since the alternator is driven by the serpentine belt, a broken belt will prevent the battery from charging, triggering the battery warning light on your dashboard.
    • Overheating: While less common directly from a serpentine belt, some Honda Accord models may drive the water pump with the serpentine belt, a failure could lead to overheating. (Note: On most modern Accords, the water pump is driven by the serpentine belt).
    • Accessory Malfunctions: Any loss of function for the air conditioning, power steering, or charging system while the engine is running can point to a serpentine belt issue.
    • Tensioner Wobble or Noise: If the automatic tensioner pulley appears to be wobbling excessively while the engine is running, or if it's making grinding or rattling noises, the tensioner itself may be failing and should be replaced along with the belt.

    Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2017 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email