Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Brake Pad & Rotor Specs

    2017 Honda Accord Brake Pad & Rotor Specs

    Everything on this vehicle

    Working on this 2017 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2017 Honda Accord

    Caliper Bracket Torque (Front)
    80 lb-ft (108 Nm)
    Caliper Bracket Torque (Rear)
    41 lb-ft (55 Nm)
    Caliper Slide-Pin Torque (Front)
    25 lb-ft (34 Nm)
    Caliper Slide-Pin Torque (Rear)
    17 lb-ft (23 Nm)

    From the table below. Confirm with your owner's manual for your exact engine.

    Quick Reference

    SpecMeasurement/Value
    Front Pad PN (OEM)45022-T2G-A00 (verify with dealer)
    Front Pad PN (Aftermarket Cross-Refs)Akebono ACT1657, Bosch BC1657, Wagner QuickStop ZD1657, Power Stop Z23-1657
    Rear Pad PN (OEM)43022-T2G-A00 (verify with dealer)
    Rear Pad PN (Aftermarket Cross-Refs)Akebono ACT1455, Bosch BC1455, Wagner QuickStop ZD1455, Power Stop Z23-1455
    Front Rotor Diameter & New Thickness11.1 in (282 mm) & 0.984 in (25 mm)
    Front Rotor Minimum Thickness0.890 in (22.6 mm)
    Rear Rotor Diameter & New Thickness10.2 in (259 mm) & 0.394 in (10 mm)
    Rear Rotor Minimum Thickness0.335 in (8.5 mm)
    Caliper Piston Count (Front/Rear)1/1
    Caliper Bracket Torque (Front)80 lb-ft (108 Nm)
    Caliper Bracket Torque (Rear)41 lb-ft (55 Nm)
    Caliper Slide-Pin Torque (Front)25 lb-ft (34 Nm)
    Caliper Slide-Pin Torque (Rear)17 lb-ft (23 Nm)
    Brake Fluid SpecDOT 3 or DOT 4

    How to Choose Pads

    When it comes to replacing the brake pads on your 2017 Honda Accord, you'll encounter several material types, each with its own characteristics:

    • Ceramic Pads: These are a popular choice for daily drivers. Ceramic pads are known for producing very little dust and operating quietly. They offer consistent stopping power in various temperatures and typically last a long time. They are an excellent all-around choice for the average Accord owner looking for comfort and cleanliness.

    • Semi-Metallic Pads: Often the factory standard on many vehicles, semi-metallic pads offer excellent stopping power and good pedal feel. They are more durable than organic pads and are effective across a wide range of temperatures. However, they can be noisier and produce more brake dust than ceramic pads.

    • Heavy-Duty (HD) Pads: These are typically semi-metallic or specialized ceramic compounds designed for more extreme braking conditions, such as towing, spirited driving, or frequent heavy braking. While they offer superior fade resistance and stopping power, they may also produce more noise and dust and might not be necessary for standard daily driving. Unless you frequently push your Accord's braking system to its limits, standard ceramic or good quality semi-metallic pads will be sufficient.

    For most 2017 Honda Accord owners, high-quality ceramic pads offer the best balance of performance, low dust, and quiet operation. If you prioritize maximum stopping power or have a driving style that demands more from your brakes, a good set of semi-metallic pads would be a suitable alternative.

    Typical Service Life

    The service life of your 2017 Honda Accord's brake pads and rotors can vary significantly based on your driving habits, environment, and the quality of the parts installed. Generally, you can expect:

    • Front Brake Pads: 30,000 – 70,000 miles.
    • Rear Brake Pads: 40,000 – 80,000 miles (rear pads often last longer due to less braking force).
    • Rotors: Rotors typically last through two sets of brake pads, or around 60,000 – 100,000 miles, assuming they remain above the minimum thickness and do not develop excessive runout or warping. However, it's common practice to replace rotors with every pad change for optimal performance and to avoid potential issues.

    Regular inspection is key. A "pad-slap interval" (checking your brakes) should be performed at least every 10,000 to 15,000 miles, or during every tire rotation or oil change. This allows technicians to monitor pad wear, rotor condition, and the overall health of your braking system.

    Common Brake Issues for This Generation

    Owners of the 2017 Honda Accord, and the ninth generation in general (2013-2017), generally report a reliable braking system. However, like any vehicle, some common issues can arise:

    • Premature Rear Brake Wear: While less common than in some other vehicles, some Accord owners have reported their rear brake pads wearing out faster than expected. This can sometimes be attributed to the vehicle's stability control systems subtly applying the rear brakes more often. Regular checks of your rear brakes are recommended.
    • Brake Noise (Squealing/Grinding): Squealing can indicate worn pads, especially if the wear indicators are activated. Grinding usually points to metal-on-metal contact, meaning the pads are completely worn and the backing plates are contacting the rotors. This requires immediate attention.
    • Pulsation/Vibration During Braking: This almost always indicates warped rotors. While rotors don't truly "warp" in the traditional sense, uneven heat distribution and material transfer from the pads can create high spots that feel like pulsation through the pedal and steering wheel. Machining the rotors (if thick enough) or replacing them is the solution.
    • Sticky Calipers/Slide Pins: Over time, especially in areas with road salt or high humidity, caliper slide pins can seize, or caliper pistons can stick. This prevents the pads from retracting properly, leading to uneven wear, reduced braking efficiency, and sometimes a burning smell. Proper lubrication during a brake job is crucial to prevent this.

    Brake Job Cost Estimate

    A brake job cost for your 2017 Honda Accord can vary based on your location, the shop you choose, and the quality of parts (OEM vs. aftermarket). Here's a general estimate:

    • Front Brake Pads & Rotors: $300 - $600 (Parts & Labor)
    • Rear Brake Pads & Rotors: $250 - $550 (Parts & Labor)
    • Full Brake Job (Front & Rear Pads and Rotors): $550 - $1100 (Parts & Labor)

    These estimates are for replacing pads and rotors. If your calipers need to be replaced, or if brake fluid flush is added, the cost will increase. Remember to get a detailed quote from your chosen repair shop.

    Find a trusted brake shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2017 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-24.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email