2017 Honda Accord Coolant Capacity & Type
Working on this 2017 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
The 2017 Honda Accord's cooling system holds approximately 7.3 to 7.6 quarts (6.9 to 7.2 liters) of coolant, depending on the engine. Properly maintaining your Accord's cooling system is crucial for its longevity and performance. This guide will cover everything you need to know about your 2017 Honda Accord's coolant, including capacity, type, maintenance, and common issues.
Quick Answer
- Total Cooling System Capacity: 7.3 - 7.6 quarts (6.9 - 7.2 liters)
- OEM Coolant Specification: Honda Long-Life Antifreeze/Coolant Type 2 (Blue, P-OAT Hybrid Coolant)
- Mix Ratio: Pre-mixed 50/50 ethylene glycol solution (do not add water)
Capacity by Engine Option
The coolant capacity for your 2017 Honda Accord can vary slightly based on the engine:
- 2.4L 4-Cylinder Engine: Approximately 7.3 quarts (6.9 liters)
- 3.5L V6 Engine: Approximately 7.6 quarts (7.2 liters)
Flush Interval
Honda recommends replacing the coolant in your 2017 Accord at specific intervals to ensure optimal cooling system performance and prevent corrosion.
- Normal Duty: The initial coolant replacement is typically recommended at 120,000 miles (192,000 km) or 10 years, whichever comes first. After that, replacement is usually every 60,000 miles (96,000 km) or 5 years.
- Severe Duty: If you operate your vehicle under severe conditions (e.g., extreme temperatures, heavy towing, frequent stop-and-go traffic), it's wise to consider more frequent coolant inspections and potentially earlier replacement.
Always refer to your vehicle's owner's manual for the most accurate and up-to-date maintenance schedule.
How to Refill & Bleed
Refilling and bleeding your Accord's cooling system is important to ensure no air pockets remain, which can cause overheating. While a professional shop might use a vacuum fill tool, here's a general procedure for a DIY approach:
- Safety First: Ensure the engine is completely cool before starting. Wear appropriate safety gear.
- Drain Old Coolant: Place a drain pan under the radiator drain plug (petcock) and open it. Remove the radiator cap to allow the system to drain faster. Be prepared for coolant to spill.
- Flush (Optional but Recommended): Once drained, close the drain plug. You can fill the system with distilled water, run the engine with the heater on until it reaches operating temperature, then cool and drain again. Repeat until the water drains clear. Consult your owner's manual for specific flush procedures if recommended.
- Refill with New Coolant: Close the radiator drain plug. Slowly fill the radiator with the Honda Long-Life Antifreeze/Coolant Type 2 (pre-mixed 50/50). Fill the reservoir to the MAX line.
- Bleed Air: Leave the radiator cap off. Start the engine and let it run with the heater on full blast and the fan on low. This helps open the heater core and circulate coolant. As the engine warms up, the thermostat will open. Keep an eye on the coolant level in the radiator and top it off as needed. Squeeze the upper and lower radiator hoses several times to help release trapped air.
- Locate Bleed Screw (if applicable): Some engines, especially V6 models, may have a bleed screw or valve on the highest point of the cooling system (often near the thermostat housing or on a heater hose). Open this screw slightly to allow air to escape until a steady stream of coolant emerges. Close it once air is purged.
- Monitor Temperature: Watch the temperature gauge closely. Once the engine reaches operating temperature and no more air bubbles appear in the radiator, replace the radiator cap. Drive the vehicle and monitor the coolant level in the reservoir over the next few days, topping off as necessary.
Common Cooling System Issues for This Generation
Owners of the 2017 Honda Accord, and similar generation Accords, may encounter a few common cooling system issues:
- Leaking Water Pump: While not extremely common across all models, water pump leaks can occur, especially as the vehicle ages. Look for coolant puddles under the front of the car or a sweet smell.
- Radiator Leaks: Radiators can develop leaks over time, often due to corrosion or damage from road debris. Check for staining on the radiator fins or visible dripping.
- Thermostat Failure: A failing thermostat can cause the engine to overheat (stuck closed) or run too cool (stuck open). Symptoms include fluctuating temperature gauges or the engine taking a long time to warm up.
- Coolant Hose Leaks: Hoses degrade over time, leading to cracks or leaks. Inspect hoses for swelling, cracking, or softness.
- Cooling Fan Issues: Malfunctioning cooling fans can lead to overheating, particularly in stop-and-go traffic or at idle. Listen for the fans engaging when the engine is hot.
Regular inspection of your cooling system components and adherence to the recommended coolant flush intervals can help prevent these issues and keep your 2017 Honda Accord running smoothly.
Find a trusted shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2017 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2017 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-26.