Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission & Axle Gear Ratios

    2017 Honda Accord Transmission & Axle Gear Ratios

    Everything on this vehicle

    Complete transmission, transaxle, and final drive specs for the 9th-Gen 2017 Honda Accord.

    Working on this 2017 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2017 Honda Accord

    3.238
    2.4L I4 with CVT (LX, EX, EX-L)
    3.941
    3.5L V6 with 6-Speed Automatic (EX-L V6, Touring)
    4.105
    2.4L I4 with 6-Speed Manual (LX, Sport, EX)
    3.550
    3.5L V6 with 6-Speed Manual (Coupe EX-L V6)

    From the table below. Confirm with your owner's manual for your exact engine.

    The 2017 Honda Accord is widely celebrated for its bulletproof reliability, engaging driving dynamics, and excellent fuel efficiency. Whether you are driving the standard 2.4-liter inline-4 or the robust 3.5-liter V6, the powertrain setup is critical to the vehicle's performance. As a front-wheel-drive (FWD) vehicle, the Accord does not use a traditional rear axle setup like a truck; instead, it utilizes a transaxle that combines the transmission and the differential into a single unit.

    Understanding the internal transmission gear ratios and the final drive (axle) ratios can help you diagnose issues, plan for modifications, or simply understand how your vehicle maximizes its power band. Below is a comprehensive powertrain specification guide for the 2017 Honda Accord.

    Transmission gear ratios

    For the 2017 model year, Honda offered four distinct transmissions depending on the engine and body style (Sedan vs. Coupe). Here are the internal gear ratios for each available transaxle.

    Continuously Variable Transmission (CVT)

    Available with the 2.4L EarthDreams 4-cylinder engine.

    GearRatio
    Forward (Continuous)2.645 – 0.405
    Reverse1.858 – 1.726

    6-Speed Manual Transmission (2.4L Engine)

    Standard on LX, Sport, and EX trims (Sedan and Coupe).

    GearRatio
    1st3.643
    2nd2.080
    3rd1.361
    4th1.024
    5th0.829
    6th0.686
    Reverse3.673

    6-Speed Automatic Transmission

    Available with the 3.5L V6 engine (Sedan and Coupe).

    GearRatio
    1st3.140
    2nd2.010
    3rd1.309
    4th0.980
    5th0.717
    6th0.528
    Reverse3.225

    6-Speed Manual Transmission (3.5L V6 Engine)

    Exclusive to the V6 Coupe.

    GearRatio
    1st3.142
    2nd1.869
    3rd1.303
    4th1.000
    5th0.805
    6th0.648
    Reverse3.000

    Available axle ratios

    Because the 2017 Accord is front-wheel-drive, it does not feature selectable rear-end ratios like you would find in a pickup truck (e.g., 3.31, 3.55, 3.73). Instead, the differential is housed within the transaxle, and the "axle ratio" is referred to as the Final Drive Ratio. This ratio is factory-matched to the engine and transmission pairing to optimize the balance between acceleration and fuel economy.

    RatioAvailable With (engine/trim/package)RPO/Axle CodeBest For (towing / fuel economy / balanced)
    3.2382.4L I4 with CVT (LX, EX, EX-L)Transaxle ID TagFuel economy and smooth highway cruising
    3.9413.5L V6 with 6-Speed Automatic (EX-L V6, Touring)Transaxle ID TagBalanced performance and highway passing power
    4.1052.4L I4 with 6-Speed Manual (LX, Sport, EX)Transaxle ID TagQuick off-the-line acceleration / Balanced
    3.5503.5L V6 with 6-Speed Manual (Coupe EX-L V6)Transaxle ID TagHigh-speed performance and sporty driving

    How to identify your axle ratio

    Identifying your specific transaxle and final drive ratio on a 2017 Honda Accord is slightly different from identifying a traditional truck axle.

    1. Check the Transmission Housing Tag: Honda transaxles have a barcoded sticker or stamped metal plate directly on the top or front of the transmission bell housing. This contains the transmission model code (e.g., BC5A, M9PA).
    2. Use a VIN Decoder: Because final drive ratios on the Accord are strictly tied to the engine and transmission combination, the easiest way to confirm your setup is by decoding your 17-digit Vehicle Identification Number (VIN). The VIN will confirm your exact engine and factory transmission.
    3. Driver’s Door Jamb Sticker: While Honda does not use RPO codes like General Motors, the primary door jamb sticker will verify your exact trim level and original equipment specifications, which easily points you to the final drive ratio using the chart above.

    Towing vs MPG impact

    While the Honda Accord is a passenger car and not designed as a dedicated towing vehicle (Honda rates the 2017 Accord for a maximum towing capacity of 1,000 lbs), the principles of gearing still apply to its performance and efficiency.

    • Numerically Lower Ratios (e.g., 3.238 on the CVT): This is considered a "tall" gear. A lower numerical ratio keeps engine RPMs down at highway speeds. This drastically improves fuel economy and reduces cabin noise, making it perfect for long-distance commuting.
    • Numerically Higher Ratios (e.g., 4.105 on the I4 Manual): This is a "short" gear. It multiplies engine torque more effectively to the wheels, allowing the engine to rev up into its power band much faster. This results in snappier acceleration and better low-speed drivability, though it slightly sacrifices maximum highway MPG.

    Common issues

    The 2017 Accord powertrain is heavily refined, but as vehicles age and accumulate mileage, a few common driveline issues can emerge:

    • CVT Judder or Shudder: Some high-mileage CVT models can experience a slight hesitation or "judder" at low speeds. This is often resolved by strictly adhering to Honda's recommended High-Performance Transmission Fluid (HCF-2) drain-and-fill intervals (every 30,000 miles).
    • Manual Transmission 3rd Gear Grind: A known quirk in some Honda manual transmissions involves a slight grind or pop-out when shifting into 3rd gear. This is typically attributed to worn synchronizers. Upgrading to an aftermarket synthetic friction-modified manual transmission fluid can sometimes mask or alleviate the symptom.
    • Torque Converter Lock-Up Issues: On V6 models with the 6-speed automatic, worn fluid can cause torque converter shudder when the system attempts to lock up at cruising speeds. Fluid replacement or a software update usually fixes this, but severe cases require a torque converter replacement.
    • CV Axle Wear: As FWD cars, Accords put all their steering and drive loads through the front Constant Velocity (CV) axles. Clicking sounds while turning or vibrations under acceleration are classic signs of torn CV boots and failing CV joints.

    Find a driveline shop on Repairius to properly diagnose and service your Honda Accord's transmission and axles to keep it running smoothly for years to come.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2017 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-09-18.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email