2017 Honda Accord Torque Specifications
Working on this 2017 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 80 / 108 | Apply anti-seize to stud threads, but not lug nut seating surface |
| Oil Drain Plug | 29 / 39 | Always use a new crush washer |
| Transmission Drain Plug (Automatic) | 36 / 49 | Always use a new crush washer |
| Transmission Drain Plug (Manual) | 33 / 45 | Always use a new crush washer |
| Front Brake Caliper Bracket Bolts | 81 / 110 | Use thread locker when specified |
| Rear Brake Caliper Bracket Bolts | 41 / 56 | Use thread locker when specified |
| Front Brake Caliper Slide Pins | 24 / 33 | Apply silicone grease to pins |
| Rear Brake Caliper Slide Pins | 17 / 23 | Apply silicone grease to pins |
| Front Axle Nut | 181 / 245 | Always replace with a new nut; stake or peen the nut |
| Spark Plugs | 13 / 18 | Apply a thin coat of anti-seize to threads of new spark plugs (anti-seize should not be applied to pre-coated threads) |
| Valve Cover Bolts | 8.7 / 12 | Tighten in a criss-cross pattern from the center out |
Wheel lug torque pattern
For the 2017 Honda Accord, the wheel lug nuts should be tightened in a star pattern. This ensures even pressure distribution and proper seating of the wheel against the hub.
Brake torque notes
When working on the brake system of your 2017 Honda Accord, paying close attention to torque specifications is paramount for safety. For brake caliper bracket bolts, it's crucial to clean the threads thoroughly before installation and apply thread locking compound if specified by Honda. This prevents bolts from loosening due to vibration and heat. Caliper slide pins should be lubricated with a high-temperature silicone-based grease to ensure smooth operation of the caliper and prevent uneven pad wear. Never overtighten these components, as it can strip threads, deform parts, or even lead to catastrophic failure.
Why torque matters
Proper fastener torque is critical for the safety, reliability, and longevity of your 2017 Honda Accord. Under-torqued fasteners can vibrate loose, leading to parts falling off, fluid leaks, or even complete component failure. For example, an under-torqued wheel lug nut could cause a wheel to detach, while an under-torqued oil drain plug would leak oil, potentially leading to engine damage.
Conversely, over-torqued fasteners can stretch or strip threads, damage the fastener itself, or crack the component being tightened. This can lead to costly repairs and compromise the integrity of the vehicle. For instance, over-torquing spark plugs can damage the cylinder head threads, and over-torquing an axle nut can damage the wheel bearing.
Using a calibrated torque wrench is essential for achieving the correct torque specifications. Always refer to a reputable service manual or repair data for the most accurate and up-to-date information for your specific vehicle. While this guide provides common torque specifications, variations can exist based on specific models, engine types, or even manufacturing changes.
Disclaimer: Always verify critical fastener torque specifications in the official OEM service manual for your specific 2017 Honda Accord model. This information is intended as a general guide and should not replace professional advice or procedures.
Find a trusted shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2017 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2017 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-07.