2018 Honda Accord Wheel Alignment Specifications
Working on this 2018 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Angle | Front Pref | Front Range | Rear Pref | Rear Range |
|---|---|---|---|---|
| Camber | -0.3° | -0.8° to 0.2° | -0.8° | -1.3° to -0.3° |
| Caster | 7.1° | 6.6° to 7.6° | N/A | N/A |
| Total Toe | 0.00° | -0.08° to 0.08° | 0.17° | 0.08° to 0.25° |
| Individual Toe | 0.00° | -0.04° to 0.04° | 0.08° | 0.04° to 0.13° |
| SAI | 11.6° | 11.1° to 12.1° | N/A | N/A |
| Thrust Angle | N/A | N/A | N/A | -0.10° to 0.10° |
Adjustability
The 2018 Honda Accord offers limited factory adjustability for its wheel alignment angles. On the front axle, total toe is adjustable via tie rod ends. Camber and caster are not directly adjustable from the factory. If these angles are out of specification, it often indicates worn or damaged suspension components, or a need for aftermarket correction. Aftermarket solutions like camber bolts or adjustable ball joints can be installed to allow for camber and caster adjustments.
On the rear axle, total toe is adjustable. Camber is not directly adjustable from the factory. Similar to the front, if rear camber is out of spec, it suggests component wear or the need for aftermarket adjustable control arms to bring it back into specification.
Recommended adjustment hardware
For situations where non-adjustable angles are out of specification due to minor variances or vehicle modifications, aftermarket solutions are available. For front camber correction, SPC Performance or Ingalls Engineering offer camber bolt kits that replace the upper strut mount bolts, allowing for a limited range of camber adjustment. For more significant adjustments or for rear camber correction, adjustable control arms from brands like Megan Racing or Hardrace can provide the necessary range.
Symptoms of bad alignment
Misaligned wheels can manifest in several ways, impacting your driving experience and tire longevity.
- Uneven Tire Wear: This is the most common and telling symptom. Excessive toe can cause feathering (one side of the tread block is worn smooth while the other side is sharp). Incorrect camber can lead to wear on only the inside or outside edge of the tire. For instance, too much negative camber wears the inner edge, while too much positive camber wears the outer edge. Cupping or scalloping (alternating high and low spots on the tread) can indicate worn suspension components, which also affect alignment.
- Steering Wheel Not Centered: If your steering wheel is off-center when driving straight, it's a strong indicator of an alignment problem, specifically with total toe.
- Vehicle Pulling: The car may consistently pull to one side, requiring you to constantly correct the steering. This can be caused by uneven caster settings or significant toe differences between the left and right wheels.
- Loose or Wandering Steering: If the vehicle feels unstable and tends to wander on the road, it could be due to insufficient caster or excessive toe-out.
- Vibration: While often associated with tire balance, severe alignment issues can also contribute to vibrations felt through the steering wheel or the car itself.
When to align
Regular wheel alignments are crucial for maintaining vehicle performance and tire life. It's recommended to get an alignment:
- After replacing steering or suspension components: Any repair or replacement of parts like tie rods, control arms, ball joints, struts, or shocks necessitates an alignment.
- After purchasing new tires: Maximizing the lifespan of your new tires requires them to start with a properly aligned suspension.
- After an impact: Hitting a large pothole, curb, or having a minor collision can knock your alignment out of spec.
- Every 12,000 to 15,000 miles or once a year: Even if you don't notice any immediate issues, regular checks help catch minor discrepancies before they cause significant tire wear.
- If you notice any of the "Symptoms of bad alignment" listed above.
Typical alignment cost
The cost of a wheel alignment for a 2018 Honda Accord can vary depending on your location, the type of shop (dealership vs. independent), and whether any additional adjustments or parts are needed. Generally, you can expect to pay anywhere from $80 to $150 for a standard four-wheel alignment. Some shops offer lifetime alignment packages, which can be cost-effective if you plan on keeping your vehicle for an extended period or frequently encounter conditions that necessitate alignments.
Find a trusted alignment shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2018 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-22.