2018 Honda Accord Serpentine Belt: Routing, Replacement, and Part Numbers
Working on this 2018 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Answer
For the 2018 Honda Accord with the 1.5L or 2.0L Earth Dreams L4 engine, the serpentine belt system is relatively straightforward. There are no engine options for the Accord that use different serpentine belt routing or lengths.
- Belt Length: TBD (verify with parts supplier)
- Rib Count: 6-rib
- OEM Belt PN: TBD (verify with parts supplier)
- Aftermarket Cross-references:
- Gates K06xxxx (verify with parts supplier)
- Dayco TBD (verify with parts supplier)
- Continental Elite TBD (verify with parts supplier)
- Auto-Tensioner PN: TBD (verify with parts supplier)
- Idler Pulley PN: TBD (verify with parts supplier)
Belt Routing
Before you begin any work, it's highly recommended to take a clear photograph of the existing belt's routing. This will serve as an invaluable reference during reinstallation.
Here's a text-based description of the serpentine belt routing for the 2018 Honda Accord (1.5L and 2.0L L4 engines):
- Begin at the Crankshaft Pulley, located at the bottom center of the engine. The belt will wrap around the bottom of this pulley.
- From the crankshaft, the belt travels upwards to the A/C Compressor Pulley, located on the lower passenger side of the engine. It will typically wrap over the top of this pulley.
- Leaving the A/C compressor, the belt goes to the Idler Pulley, usually situated above and slightly towards the center from the A/C compressor. The belt will run underneath this pulley.
- From the idler, the belt continues upwards to the Alternator Pulley, positioned on the upper passenger side of the engine. The belt will wrap over the top of the alternator pulley.
- Next, the belt moves across the top of the engine compartment to the Power Steering Pump Pulley (if equipped; some models have electric power steering, skipping this pulley). If present, the belt will wrap underneath this pulley.
- After the power steering pump (or after the alternator if no power steering pump), the belt routes to the Water Pump Pulley, typically located towards the upper driver's side of the engine. The belt will wrap over the top of the water pump pulley.
- Finally, the belt connects to the Automatic Tensioner Pulley, which is often found below and to the driver's side of the water pump. The belt will run over the top of the tensioner pulley, with the tensioner applying pressure to maintain proper belt tension.
How to Replace the Serpentine Belt
Replacing the serpentine belt on your 2018 Honda Accord is a manageable DIY task, but requires the right tools and attention to detail.
Tools Needed:
- Serpentine belt tool or a 3/8-inch breaker bar (or ratchet with sufficient leverage)
- New serpentine belt
Steps:
- Locate the Automatic Tensioner: Identify the automatic tensioner pulley. It will have a square opening designed to accept a 3/8-inch drive tool.
- Relieve Tension: Insert your serpentine belt tool or breaker bar into the square opening of the tensioner. Rotate the tool/bar clockwise (typically) to pivot the tensioner and relieve the tension on the belt. Hold it in this position.
- Remove the Old Belt: While holding the tensioner, carefully slip the old belt off one of the pulleys (e.g., the alternator or idler pulley) to gain slack, then fully remove it from all pulleys.
- Inspect Pulleys: Before installing the new belt, inspect all pulleys for any signs of wear, damage, or excessive play. Ensure they spin freely and quietly.
- Route the New Belt: Following the routing diagram you photographed earlier (or the description above), carefully route the new serpentine belt around all the pulleys, leaving the tensioner pulley for last, or one easily accessible pulley for last.
- Install on Tensioner: With the belt mostly routed, again apply tension to the automatic tensioner by rotating your tool/bar clockwise. Slip the new belt over the final pulley (often the tensioner itself). Ensure the ribs on the belt are correctly seated in all the pulley grooves.
- Release Tension and Verify: Slowly release the tensioner. Once the tensioner is in its resting position, double-check that the belt is properly seated on all pulleys and that no ribs are off track.
- Start Engine and Inspect: Start the engine and let it run for a minute or two. Observe the belt for proper tracking and listen for any unusual noises. Turn off the engine and re-verify the belt's position on all pulleys.
Replacement Interval
Honda generally recommends inspecting the serpentine belt at every scheduled service interval, typically every 15,000 miles or 12 months. Replacement is usually recommended between 60,000 to 100,000 miles, or sooner if signs of wear or damage are observed. Always refer to your vehicle's owner's manual for the most accurate and manufacturer-specific recommendations.
Signs of a Failing Belt or Tensioner
Ignoring a failing serpentine belt or tensioner can lead to a breakdown, as it drives essential accessories. Here are key signs to watch out for:
Failing Serpentine Belt:
- Squealing or Chirping Noises: This is the most common sign. A persistent squeal, especially on startup, during acceleration, or in wet weather, often indicates a worn, glazed, or loose belt.
- Cracks or Fraying: Visible cracks on the ribbed side of the belt, missing chunks of material, or frayed edges are clear indicators for replacement.
- Glazing: A shiny or glossy appearance on the belt's surface indicates it's hardened and losing its grip.
- Loss of Power to Accessories: Since the belt drives components like the alternator, A/C compressor, and (if applicable) power steering pump, a failing belt can lead to dimming headlights, a non-functional A/C, or heavy steering.
- Overheating: If the water pump is driven by the serpentine belt, a broken or slipping belt can lead to engine overheating.
Failing Automatic Tensioner:
- Excessive Vibrations: A failing tensioner might not hold the belt taut, leading to excessive vibrations in the belt system.
- Grinding or Growling Noises: Worn bearings within the tensioner pulley can produce grinding or growling sounds.
- Misalignment: The tensioner pulley should be perfectly aligned with the other pulleys. If it appears tilted or misaligned, it may need replacement.
- Lack of Tension: If you can easily twist the belt more than 90 degrees by hand in the longest run between pulleys, the tensioner might not be providing adequate tension.
- Visible Damage: Cracks in the tensioner body, a wobbly pulley, or a tensioner arm that's no longer smooth in its movement are all signs of failure.
If you notice any of these symptoms, it's crucial to inspect your serpentine belt system promptly and replace any failing components to ensure reliable operation of your 2018 Honda Accord.
Find a trusted shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2018 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.