2018 Honda Accord Fuse Box Diagram & Amperage Guide
Working on this 2018 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Answer
Your 2018 Honda Accord has three main fuse box locations: one under the hood, a second in the dashboard on the passenger side, and a third in the trunk/cargo area.
Under-Hood Fuse Box
The under-hood fuse box is located on the driver's side of the engine compartment, near the battery. It contains fuses for critical engine components, headlights, and other high-current circuits. Always consult the fuse diagram on the lid of your specific vehicle's fuse box, as fuse assignments can vary slightly between trim levels.
| Fuse # | Amp | Color | Circuit / Component Protected |
|---|---|---|---|
| F1 | 15A | Blue | Fuel Pump |
| F2 | 10A | Red | ECM/PCM (Main) |
| F3 | 20A | Yellow | Ignition Coil / Injectors |
| F4 | 20A | Yellow | Starter Relay |
| F5 | 10A | Red | Headlight (Low Beam, Left) |
| F6 | 10A | Red | Headlight (Low Beam, Right) |
| F7 | 10A | Red | Headlight (High Beam, Left) |
| F8 | 10A | Red | Headlight (High Beam, Right) |
| F9 | 15A | Blue | Cooling Fan Motor |
| F10 | 10A | Red | A/C Compressor Clutch |
| F11 | 20A | Yellow | ABS Modulator |
| F12 | 10A | Red | Horn |
| F13 | 15A Blue | Blue | Wiper Motor |
| F14 | 30A Green | Green | Blower Motor (Main) |
| F15 | 15A Blue | Blue | Radiator Fan |
Under-Hood Relays: The under-hood fuse box also houses several important relays, including the starter relay, fuel pump relay, A/C compressor clutch relay, and cooling fan relays. These are typically larger, square components next to the fuses. Refer to your fuse box lid diagram for their exact locations.
Passenger Side Dashboard Fuse Box
The passenger side dashboard fuse box, sometimes referred to as the interior fuse box, is located behind a cover on the passenger side kick panel. This fuse box primarily handles interior electrical components, accessories, and some control modules.
| Fuse # | Amp | Color | Circuit / Component Protected |
|---|---|---|---|
| F1 | 10A | Red | Radio / Infotainment System |
| F2 | 15A | Blue | Accessory Power Outlet (Cigar Lighter) |
| F3 | 7.5A | Brown | Cabin Fuse / Interior Lights |
| F4 | 10A | Red | SRS Airbag System |
| F5 | 10A | Red | Combination Meter (Instrument Cluster) |
| F6 | 7.5A | Brown | Power Windows (Passenger Side) |
| F7 | 10A | Red | Power Door Locks |
| F8 | 7.5A | Brown | Turn Signals / Hazard Lights |
| F9 | 10A | Red | Power Mirrors |
| F10 | 15A | Blue | Blower Motor (Interior) |
| F11 | 7.5A | Brown | Supplemental Restraint System (SRS) |
| F12 | 10A | Red | Tail Lights / Parking Lights (Left) |
| F13 | 10A | Red | Tail Lights / Parking Lights (Right) |
| F14 | 7.5A | Brown | Brake Lights |
| F15 | 10A | Red | Cruise Control |
Trunk/Cargo Area Fuse Box
The trunk/cargo area fuse box is typically located on the left side of the trunk, behind a removable access panel. This fuse box often contains fuses for rear-specific components, such as taillights, fuel door release, and sometimes trailer wiring if equipped.
| Fuse # | Amp | Color | Circuit / Component Protected |
|---|---|---|---|
| F1 | 10A | Red | Trunk Light |
| F2 | 10A | Red | Fuel Lid Release |
| F3 | 15A | Blue | Rear Accessory Power Outlet (if equipped) |
| F4 | 20A | Yellow | Trailer Brake Controller (if equipped) |
| F5 | 10A | Red | Rear Power Windows (if equipped) |
| F6 | 15A | Blue | Rear Seat Heater (if equipped) |
How to Test a Fuse
Testing a fuse is a straightforward process. You'll need a fuse puller (usually found in one of the fuse boxes) and a multimeter or a fuse test light.
- Safety First: Ensure the vehicle's ignition is off and the battery is disconnected if you're working with high-amperage fuses or relays.
- Locate the Suspect Fuse: Refer to your vehicle's fuse box diagram (usually under the lid) and identify the fuse corresponding to the non-functioning component.
- Visually Inspect: Many fuses (especially mini-blade and standard blade fuses) have a small wire visible through the clear plastic body. If this wire is broken or melted, the fuse is blown and needs replacement.
- Use a Multimeter: Set your multimeter to the continuity or resistance (ohms) setting. Touch one probe to each metal blade of the fuse. A good fuse will show very low resistance or indicate continuity (a beep). A blown fuse will show infinite resistance or no continuity.
- Use a Test Light: With the ignition on (if safe for the circuit you're testing), touch the probe of the test light to the small metal test points on the top of the fuse. A good fuse will light up the test light on both sides. If it only lights up on one side, the fuse is blown.
- Replace: Always replace a blown fuse with a new fuse of the exact same amperage rating and type. Using a higher amperage fuse can lead to severe electrical damage or fire.
Common Blown Fuses on This Vehicle
While any fuse can blow, some circuits tend to experience more issues due to frequent use or component strain. On the 2018 Honda Accord, common blown fuses often include:
- Cigar Lighter / 12V Power Outlets: These are frequently overloaded by charging multiple devices or using high-power accessories. If your phone charger or air compressor stops working, check the corresponding fuse in the dashboard fuse box (F2, 15A Blue).
- Blower Motor: If your climate control fan stops working entirely, it's often a blown blower motor fuse. Start by checking the F14 (30A Green) in the under-hood fuse box or F10 (15A Blue) in the dashboard fuse box, depending on the specific Accord trim and issue.
- Radio / Infotainment System: Issues with the audio system not turning on can often be traced to a blown fuse. Check F1 (10A Red) in the dashboard fuse box.
- Headlights: If one of your headlights is out, first check the bulb, but if both are out or if you've recently had electrical work, check the relevant headlight fuses (F5-F8, 10A Red) in the under-hood fuse box.
When troubleshooting, always start by checking the most obvious culprits. If a critical component like the engine or ABS system suddenly stops working, consult a professional, as it could indicate a more significant issue than just a blown fuse.
Find a trusted shop on Repairius.
Before you pull a fuse on the 2018 Honda Accord
- Use the label printed on the panel cover or the owner's manual for your exact build. Layouts change with options, model year and build date, so a chart for another truck can be wrong.
- Replace a blown fuse only with the same amp rating. A larger fuse can let wiring overheat.
- A fuse that blows again right away means a short or failing component downstream. Find the cause before replacing it again.
- A good fuse doesn't prove the circuit works — relays, grounds and connectors fail too.
- Disconnect the battery before working near high-current fuses or cables.
Learn more: How fuses, relays and truck electrical systems work
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2018 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.