Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2018 Honda Accord — Oil Capacity & Filter Specs

    Everything on this vehicle

    Quick reference for oil capacity, viscosity, spec, filter part numbers, drain plug torque, and intervals

    Working on this 2018 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2018 Honda Accord takes 3.7 to 5.7 quarts of oil with a filter change, depending on the engine: 1.5T uses 3.7 qt (3.5 L), 2.0T uses 5.7 qt (5.4 L), and the Hybrid uses about 4.4 qt (4.2 L).

    Quick answer

    • Oil capacity (with filter):
      • 1.5L Turbo: 3.7 qt (3.5 L)
      • 2.0L Turbo: 5.7 qt (5.4 L)
      • 2.0L Hybrid: ~4.4 qt (4.2 L)
    • Recommended oil weight: 0W-20 full synthetic
    • Oil specification: API SP (or SN Plus)/ILSAC GF-6; Honda Genuine 0W-20 or equivalent
    • Oil filter:
      • OEM Honda: 15400-PLM-A02 (common Honda 7317-size; confirm by VIN with your dealer)
      • Popular cross-refs: Fram XG7317/PH7317, Wix 57356, Mobil 1 M1-110A

    Capacity by engine option

    EngineEngine codeCapacity (with filter)ViscosityNotes
    1.5L Turbo I4L15B73.7 qt (3.5 L)0W-20Direct-injected turbo; watch for fuel dilution on short trips
    2.0L Turbo I4K20C45.7 qt (5.4 L)0W-20Direct-injected turbo
    2.0L I4 Hybrid (Atkinson)LEB~4.4 qt (4.2 L)0W-20Engine runs intermittently; check level warm after shutdown

    Oil change interval

    • Normal duty: Follow Honda’s Maintenance Minder (MM). Typical intervals run 7,500–10,000 miles or up to 12 months with 0W-20 full synthetic.
    • Severe duty: Every 5,000 miles or 6 months, whichever comes first. Severe service includes frequent short trips, extensive idling, very cold weather, dusty environments, or trailer towing.
    • Tip: Turbo and DI engines benefit from high-quality API SP/SN Plus oil to mitigate LSPI and fuel dilution. If your MM drops quickly due to driving pattern, shorten intervals accordingly.

    Drain plug torque

    • Drain plug torque: 29 lb-ft (39 N·m)
    • Always replace the 14 mm aluminum crush washer on the drain plug at each service to prevent seepage.

    How to change the oil

    1. Warm the engine, park level, and remove the key. For Hybrid, ensure the car is OFF and not in READY mode.
    2. Remove the lower engine cover fasteners for access (10 mm bolts/clips). Place a drain pan under the plug.
    3. Remove the drain plug; let oil drain fully. Replace the crush washer and torque the plug to 29 lb-ft.
    4. Spin off the oil filter. Lightly oil the new filter’s gasket and install hand-tight: turn until gasket contacts, then an additional 3/4 turn.
    5. Fill the engine with the majority of the specified capacity:
      • 1.5T: start with ~3.4 qt, then top off.
      • 2.0T: start with ~5.3 qt, then top off.
      • Hybrid: start with ~4.1 qt, then top off.
    6. Start the engine, check for leaks, then shut down and wait 2–3 minutes. Verify the dipstick is between the marks; adjust as needed.
    7. Reset the Maintenance Minder (Oil Life) via the steering wheel/menu or per owner’s manual.
    8. Reinstall the undertray and verify all clips/bolts are secure.

    Common issues / tips for this generation

    • 1.5T fuel dilution: Short-trip, cold-weather driving can lead to fuel mixing with oil in the L15B7. Use API SP or SN Plus 0W-20, avoid extended idling, and consider shorter intervals if you see rising oil level or fuel odor. Honda issued software updates/TSBs in some regions—ask your dealer.
    • Don’t overfill: Overfilling can aerate oil and trigger faults in turbo engines. Always sneak up on the final level.
    • Use the right filter size: The Honda 7317-size filter listed above fits most 2018 Accords. Part numbers can change; confirm by VIN if uncertain, especially for Hybrid.
    • Underbody panel care: The Accord’s lower splash shield uses multiple push clips—use a panel tool and replace broken clips to prevent future rattles.
    • Interval driven by MM: The Maintenance Minder adjusts for driving style/temperature. It’s normal for two identical cars to have different OLM readings at the same mileage.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2018 Honda Accord

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-10-09.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email