Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Coolant Capacity & Type

    2018 Honda Accord Coolant Capacity & Type

    Everything on this vehicle

    Your complete guide to coolant capacity, type, flush intervals, and common issues for the 10th-generation Honda Accord.

    Working on this 2018 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    A 2018 Honda Accord holds between 6.0 and 6.2 quarts (5.7 and 5.9 liters) of engine coolant, depending on its engine configuration.

    Quick Answer

    • Total Cooling System Capacity: 6.0 qts (5.7 L) for the 1.5L Turbo; 6.2 qts (5.9 L) for the 2.0L Turbo.
    • OEM Coolant Specification: Honda Long Life Antifreeze/Coolant Type 2
    • Coolant Color: Blue
    • Coolant Chemistry: Phosphate-based Organic Acid Technology (P-OAT)
    • Mix Ratio: 50/50 with distilled water (pre-mixed is highly recommended).

    Capacity by Engine Option

    The 10th-generation Honda Accord (2018-2022) was offered with two different turbocharged engines, each with slightly different cooling system capacities. It is critical to use the correct amount of coolant to ensure proper engine temperature regulation.

    EngineCapacity (Quarts)Capacity (Liters)
    1.5L Turbo I46.0 qts5.7 L
    2.0L Turbo I46.2 qts5.9 L

    Note: These values represent the total system capacity, including the engine, radiator, and heater core. A simple drain-and-fill may only replace 4-5 quarts.

    Flush Interval

    For a 2018 Accord, Honda has a specific, long-life coolant service schedule.

    • Initial Coolant Flush: The first coolant change is recommended at approximately 10 years or 120,000 miles.
    • Subsequent Flushes: After the initial service, the interval is shortened to every 5 years or 60,000 miles.

    Severe Duty: If the vehicle is operated in extreme temperatures, used for towing, or driven frequently in mountainous terrain or stop-and-go traffic, consider shortening these intervals to protect the engine and cooling system components.

    How to Refill & Bleed

    Properly bleeding the air from the cooling system is crucial on modern cars like the 2018 Accord to prevent overheating. Trapped air can cause hot spots in the engine or a poorly functioning heater.

    1. Safety First: Ensure the engine is completely cool before opening the radiator cap.
    2. Use a Spill-Free Funnel: Attach a spill-free funnel kit to the radiator neck. This is the most effective way to bleed the system on these vehicles.
    3. Fill: Slowly pour the 50/50 pre-mixed Honda Type 2 coolant into the funnel until the radiator is full and the funnel is about one-third full.
    4. Start the Engine: Turn the car on, set the cabin heater to maximum heat and the fan to a low speed. This ensures the heater core is open and circulating coolant.
    5. Bleed the Air: Let the engine idle. You will see air bubbles coming up into the funnel as the system purges itself. Gently squeeze the upper and lower radiator hoses periodically to help dislodge any trapped air pockets.
    6. Reach Operating Temperature: Continue to idle the engine until it reaches normal operating temperature and the radiator cooling fans cycle on and off at least twice. This confirms the thermostat has opened.
    7. Cool Down & Finalize: Shut off the engine and let it cool down completely. Remove the spill-free funnel, top off the radiator if necessary, and securely replace the radiator cap. Finally, add coolant to the overflow reservoir so the level is between the MIN and MAX lines.

    Common Cooling System Issues

    The 10th-generation Accord is a reliable vehicle, but like any car, it can experience cooling system problems. Be aware of these potential issues:

    • Leaking Hoses or Radiator: Over time, rubber hoses can become brittle and crack, and the radiator can be damaged by road debris. A sweet smell after driving or visible blue-ish puddles under the car are signs of a leak.
    • Sticking Thermostat: A thermostat that fails in the closed position will cause rapid overheating. If it fails open, the engine may take a very long time to warm up and throw a check engine light.
    • Water Pump Failure: While the water pumps are generally robust, they are a wear-and-tear item. A failing pump may weep coolant from its weep hole or make a humming/whining noise from the engine belt area.
    • Active Grille Shutter Malfunction: This system, which opens and closes shutters in front of the radiator to improve aerodynamics and engine warm-up, can sometimes fail. A malfunction will typically trigger a warning message on the dashboard and can affect cooling efficiency.

    To ensure a long service life for your Accord, always use the specified Honda Type 2 blue coolant and follow the correct service procedures.

    Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2018 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email