2018 Honda Accord — Brake Pad & Rotor Specs
Working on this 2018 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick answer — 2018 Honda Accord
- Caliper Bracket Torque
- 80 ft-lbs
- Caliper Slide-Pin Torque
- 25 ft-lbs
From the table below. Confirm with your owner's manual for your exact engine.
Your complete guide to brake service, parts, and specs for the 10th-generation (2018-2022) Honda Accord.
Proper brake maintenance is critical for the safety and performance of your 2018 Honda Accord. This guide provides all the necessary specifications, part numbers, and technical advice you need to perform a professional-quality brake job. Whether you're a DIY-er or just want to be informed when talking to your mechanic, these details are essential.
Quick Reference: 2018 Accord Brake Specs
| Specification | Front Brakes | Rear Brakes |
|---|---|---|
| OEM Pad P/N | 45022-TVA-A01 | 43022-TVA-A01 |
| Akebono Pad P/N | ACT1991 | ACT2022 |
| Bosch Pad P/N | BC1991 | BC2022 |
| Wagner Pad P/N | QC1991 | QC2022 |
| Power Stop Pad P/N | Z23-1991 | Z23-2022 |
| Rotor Diameter | 12.3 in (312 mm) | 11.1 in (282 mm) |
| Rotor New Thickness | 25 mm | 9 mm |
| Rotor Minimum Thickness | 23 mm | 8 mm |
| Caliper Piston Count | Single Piston | Single Piston (w/ EPB) |
| Caliper Bracket Torque | 80 ft-lbs | 56 ft-lbs |
| Caliper Slide-Pin Torque | 25 ft-lbs | 25 ft-lbs |
| Brake Fluid Spec | DOT 3 or DOT 4 | DOT 3 or DOT 4 |
Note: Part numbers can vary by trim level and manufacturing date. Always verify the correct part number with your VIN at a dealership or with your parts supplier before purchasing.
How to Choose Brake Pads
Choosing the right brake pad compound is a balance of performance, noise, dust, and longevity.
-
Ceramic (Recommended for most drivers): The 2018 Accord comes from the factory with ceramic brake pads. They offer the best balance for daily driving, providing quiet operation, low brake dust, and long service life. For a daily commuter, sticking with a quality OEM-equivalent ceramic pad like those from Akebono or Bosch is the best choice.
-
Semi-Metallic: These pads offer superior bite and heat dissipation, making them a good choice for spirited or aggressive drivers. The trade-off is significantly more brake dust, a higher potential for noise (squealing), and faster rotor wear. Brands like Power Stop (Z23, Z26) offer popular semi-metallic options.
-
Heavy-Duty / Fleet: These are generally not applicable for a passenger sedan like the Accord. They are designed for trucks and service vehicles that see extreme loads and temperatures.
Typical Service Life & "Pad-Slap" Interval
The service life of your brakes depends heavily on your driving style and environment. On average, expect to replace the brake pads on a 2018 Accord every 30,000 to 70,000 miles. Rotors are now considered a wear item and are often thin from the factory. For optimal performance and safety, it is highly recommended to replace the rotors with the pads at every service.
A "pad-slap" refers to replacing only the brake pads while re-using the old rotors. We generally discourage this practice. However, if the rotors are very new (e.g., under 30,000 miles) and measure well above the minimum thickness with no warping, hard spots, or significant grooving, a single pad-slap may be performed. Inspect the rotors carefully before making this decision.
Common Brake Issues for This Generation
The 10th-generation Honda Accord features an Electronic Parking Brake (EPB). This is the most significant change from prior generations. To replace the rear brake pads, you must use a compatible automotive scan tool to put the rear calipers into "Service Mode" or "Maintenance Mode."
Failure to use a scan tool will result in damage to the electronic motors inside the calipers. Do not attempt to manually compress the rear caliper piston using a traditional C-clamp or piston tool. This will destroy the internal mechanism, requiring a costly caliper replacement.
Some owners have also reported slightly accelerated rear brake wear compared to the front, which is somewhat unusual for a front-wheel-drive car. This makes regular brake inspections essential.
Brake Job Cost Estimate (as of 2023)
- DIY Parts Cost: Expect to pay between $250 to $500 for a full set of quality pads and rotors (front and rear).
- Professional Installation (Indy Shop): A full front and rear brake job will typically cost between $700 and $1,200, depending on labor rates in your area and the parts chosen.
- Professional Installation (Dealership): Dealership service will be on the higher end, likely from $900 to $1,500+.
Remember to factor in the potential need for a bi-directional scan tool if you are performing a DIY rear brake job.
Find a trusted brake shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2018 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2018 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-27.