Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Serpentine Belt Routing & Length

    2021 Honda Accord Serpentine Belt: Routing and Replacement

    Everything on this vehicle

    Working on this 2021 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    2021 Honda Accord Serpentine Belt: A Complete Guide

    This reference guide provides serpentine belt specifications, part numbers, and replacement information for the tenth-generation 2021 Honda Accord. The 2021 Accord was offered with two conventional gasoline engines: a 1.5L Turbo (L15BE) and a 2.0L Turbo (K20C4). This guide covers both.

    Note: This guide does not apply to the 2021 Honda Accord Hybrid, which uses a different beltless engine design.

    Quick Answer: Belt & Component Part Numbers

    Always verify part numbers with your vehicle's VIN before purchasing. Part numbers can vary based on production date and specific vehicle options.

    For the 1.5L Turbo Engine (L15BE):

    • Serpentine Belt Length: 82.1 inches (2085 mm)
    • Rib Count: 7-rib
    • OEM Belt Part Number: 31110-6A0-A01
    • Aftermarket Belt Cross-References:
      • Gates: K070821
      • Dayco: 5070820
      • Continental: 4070820
    • Automatic Tensioner Assembly Part Number: 31170-6A0-A01
    • Idler Pulley: The 1.5L engine does not use a separate idler pulley; the tensioner pulley routes the belt.

    For the 2.0L Turbo Engine (K20C4):

    • Serpentine Belt Length: 79.2 inches (2012 mm)
    • Rib Count: 7-rib
    • OEM Belt Part Number: 31110-6C5-A01
    • Aftermarket Belt Cross-References:
      • Gates: K070792
      • Dayco: 5070790
      • Continental: 4070792
    • Automatic Tensioner Assembly Part Number: 31170-6C5-A01
    • Idler Pulley Part Number: 31185-6C5-A01

    Belt Routing

    Since it is not possible to render a diagram here, we highly recommend taking a clear photograph of the belt's path before you begin removal. You can also find a routing diagram on a sticker in the engine bay (often on the radiator support or underside of the hood).

    Below is a text-based description of the belt path, which runs between grooved and smooth pulleys. The ribbed side of the belt always contacts grooved pulleys, and the flat, smooth back of the belt contacts smooth pulleys.

    1.5L Turbo Engine Belt Routing:

    The belt path is a simple loop involving three main components and the tensioner.

    1. Starts at the Crankshaft Pulley (the largest pulley, at the bottom).
    2. Wraps around the A/C Compressor Pulley.
    3. Goes up and around the Alternator Pulley.
    4. Comes down and contacts the Tensioner Pulley before returning to the crankshaft.

    2.0L Turbo Engine Belt Routing:

    This engine adds an idler pulley into the loop.

    1. Starts at the Crankshaft Pulley.
    2. Wraps around the A/C Compressor Pulley.
    3. Goes up to the smooth Idler Pulley.
    4. Travels over to the Alternator Pulley.
    5. Comes down to contact the Tensioner Pulley before returning to the crankshaft.

    Note: Modern Accords use Electric Power Steering (EPS), so there is no power steering pump pulley. The water pump is driven by the timing chain, not the accessory belt.

    How to Replace the Serpentine Belt

    Replacing the serpentine belt on a 2021 Accord is straightforward with the correct tool. The automatic tensioner has a square hole designed to accept a 3/8-inch drive breaker bar or a dedicated serpentine belt tool, which provides better leverage in tight spaces.

    1. Safety First: Ensure the engine is cool.
    2. Locate the Tensioner: Find the automatic tensioner assembly. It has a pulley attached to a spring-loaded arm.
    3. Release Tension: Insert your 3/8" breaker bar or serpentine belt tool into the square hole on the tensioner arm. Rotate the tensioner to release the belt's tension. The direction of rotation will be the one that loosens the belt.
    4. Remove Old Belt: While holding the tensioner in the released position, carefully slip the old belt off one of the smooth, accessible pulleys like the idler or alternator.
    5. Install New Belt: Following the photo you took or the routing diagram, carefully thread the new belt around the pulleys, saving a smooth, easy-to-reach pulley for last. Double-check that the ribs on the belt are correctly seated in the grooves of each pulley (crank, A/C, alternator).
    6. Apply Tension: Slowly release the tensioner, ensuring the belt stays properly seated in all pulley grooves. The spring-loaded tensioner will automatically apply the correct amount of tension.
    7. Final Check: Do a final visual inspection of the belt path. Start the engine for a few seconds to ensure the belt runs smoothly and quietly.

    Replacement Interval

    Honda does not specify a strict mileage replacement interval for the serpentine belt. Instead, they recommend periodic inspections during routine maintenance.

    • General Guideline: As a general rule, it's wise to replace the serpentine belt between 60,000 and 100,000 miles, or if it fails a visual inspection. The belt tensioner and idler pulley should be inspected at the same time and replaced if they show signs of wear.

    Signs of a Failing Belt or Tensioner

    Your belt or tensioner may need immediate attention if you notice any of the following symptoms:

    • Squealing or Chirping Noises: A high-pitched squeal upon startup, during acceleration, or when the A/C is on often points to a worn, loose, or fluid-contaminated belt.
    • Visible Belt Wear: Inspect the belt for cracks, fraying, glazing (shiny spots), or missing ribs.
    • Chattering or Grinding Noise: A rhythmic ticking, chattering, or grinding noise from the belt area often indicates a failing bearing in the tensioner or idler pulley.
    • Tensioner Arm Fluctuation: The tensioner arm should remain relatively steady while the engine is running. If it is vibrating excessively, the internal spring mechanism is likely worn out.
    • Accessory Malfunctions: Intermittent A/C performance or a battery light on the dash could indicate the belt is slipping and not adequately turning the alternator or A/C compressor.

    If you're not comfortable performing this service yourself, Repairius can help.

    Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2021 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-13.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email