Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2021 Honda Accord Oil Capacity & Filter Guide

    Everything on this vehicle

    Working on this 2021 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2021 Honda Accord takes 4.2 quarts (4.0 liters) of 0W-20 synthetic oil for both the 1.5L and 2.0L turbocharged engines.

    Quick Answer

    • Oil Capacity: 4.2 US Quarts (4.0 Liters)
    • Recommended Oil Weight: 0W-20
    • Oil Type Spec: Full Synthetic, API SP (or API SN Plus/SN if SP not available) or ILSAC GF-6
    • OEM Oil Filter Part Number: Consult dealer (typically 15400-PLM-A02 or similar; always verify with VIN)
    • Aftermarket Oil Filter Cross-References:
      • Fram: PH7317
      • Wix: 57356
      • Mobil 1: M1-110

    Capacity by Engine Option

    EngineOil CapacityOil Type/Spec
    1.5L Turbocharged4.2 Quarts0W-20 Full Synthetic, API SP or ILSAC GF-6
    2.0L Turbocharged4.2 Quarts0W-20 Full Synthetic, API SP or ILSAC GF-6

    Oil Change Interval

    Honda's Maintenance Minder system will illuminate a wrench light on your dashboard, indicating an oil change is due. This system dynamically calculates oil life based on driving conditions.

    • Normal Duty: Typically every 7,500 – 10,000 miles or 12 months, whichever comes first.
    • Severe Duty: If you frequently drive in extreme temperatures, tow, or idle for extended periods, the Maintenance Minder may recommend an oil change sooner, sometimes as early as 3,000 – 5,000 miles.

    It is always best to follow the Maintenance Minder system and consult your owner's manual.

    Drain Plug Torque

    • Drain Plug Torque: 29 lb-ft (39 N·m)
    • Crush Washer: Always replace the aluminum crush washer (typically 14mm) with a new one during every oil change to ensure a proper seal and prevent leaks. Reusing the old washer can lead to leaks.

    How to Change the Oil

    1. Gather Supplies: New oil, oil filter, crush washer, drain pan, wrench for drain plug, oil filter wrench, funnel, jack and jack stands (if needed), clean rags.
    2. Warm Up Engine (Slightly): Run the engine for a few minutes to warm the oil, allowing it to drain more easily. Do not let it get too hot.
    3. Lift and Secure Vehicle: Safely lift the front of the vehicle using a jack and secure it with jack stands.
    4. Locate Drain Plug: Place your drain pan directly under the oil pan drain plug.
    5. Drain Oil: Carefully remove the drain plug (with a wrench) and allow all the old oil to drain completely. Inspect the old crush washer.
    6. Replace Drain Plug: Install a new crush washer on the drain plug and re-install it into the oil pan. Torque to 29 lb-ft (39 N·m).
    7. Remove Old Oil Filter: Place the drain pan under the oil filter and use an oil filter wrench to remove it. Be prepared for some residual oil to spill out.
    8. Prepare New Oil Filter: Apply a thin film of new oil to the rubber gasket of the new oil filter.
    9. Install New Oil Filter: Hand-tighten the new oil filter until snug, then turn an additional 3/4 to 1 full turn. Consult the filter manufacturer's instructions for precise tightening.
    10. Add New Oil: Lower the vehicle. Locate the oil fill cap on the engine and add 4.2 quarts of the recommended 0W-20 oil using a funnel.
    11. Check Oil Level: Start the engine and let it run for a minute, then shut it off. Wait a few minutes for the oil to settle, then check the dipstick. Add more oil if necessary, but do not overfill.
    12. Reset Maintenance Minder: Follow your owner's manual instructions to reset the oil life monitor.

    Common Issues / Tips for this Generation Accord (2018-2022)

    • Fuel Dilution (1.5L Turbo): Early models of the 1.5L turbocharged engine experienced fuel dilution issues in cold climates. Honda issued software updates and extended warranties for some vehicles. While largely mitigated, monitoring your oil life and changing it promptly is crucial for these engines.
    • Oil Consumption (2.0L Turbo): Some 2.0L turbo owners have reported minor oil consumption between changes. Regularly check your oil level to ensure it remains within the proper range, especially if driving aggressively.
    • Synthetic Oil is Key: Both the 1.5L and 2.0L turbocharged engines benefit greatly from the use of full synthetic 0W-20 oil. Its superior protection, especially during cold starts and under turbocharger stress, is essential for longevity.
    • Maintenance Minder Accuracy: Trust the Maintenance Minder system. It's designed to optimize oil change intervals based on actual driving conditions, which can be more accurate than fixed mileage intervals.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2021 Honda Accord

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email