Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission & Axle Gear Ratios

    2021 Honda Accord: Transmission and Axle Ratios

    Everything on this vehicle

    Working on this 2021 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2021 Honda Accord

    4.811
    1.5L Turbo w/ CVT
    3.552
    2.0L Turbo w/ 10-Speed AT
    3.895
    2.0L Hybrid w/ e-CVT

    From the table below. Confirm with your owner's manual for your exact engine.

    Transmission Gear Ratios

    The 2021 Honda Accord offers three distinct powertrain options, each with a unique transmission tailored for either efficiency, performance, or a hybrid blend of both. Understanding the internal gear ratios is key to appreciating how your Accord delivers power to the front wheels.

    Continuously Variable Transmission (CVT) — for 1.5T Engine

    Standard on the popular 1.5-liter turbocharged models (LX, Sport, Sport SE, EX-L), the CVT does not have traditional fixed gears. Instead, it uses a belt-and-pulley system to create a continuous range of effective ratios. This allows the engine to stay in its most efficient RPM range for longer periods, maximizing fuel economy. The table below shows the highest (for acceleration) and lowest (for cruising) ratio range.

    GearRatio
    Forward Range2.645 – 0.405
    Reverse1.859 – 1.265

    10-Speed Automatic Transmission — for 2.0T Engine

    Exclusive to the potent 2.0-liter turbocharged engine found in the Sport 2.0T and Touring trims, this 10-speed automatic provides a wide spread of ratios. The lower gears are short and closely spaced for brisk acceleration, while the higher gears, including two overdrive ratios (9th and 10th), allow for relaxed, low-RPM highway cruising to conserve fuel.

    GearRatio
    1st5.253
    2nd3.268
    3rd2.228
    4th1.696
    5th1.341
    6th1.000
    7th0.781
    8th0.638
    9th0.548
    10th0.479
    Reverse2.981

    Electronic Continuously Variable Transmission (e-CVT) — for Hybrid

    The Accord Hybrid models utilize a sophisticated e-CVT that primarily uses electric motor power to drive the wheels. It can also engage the gasoline engine to provide direct drive at certain speeds. It doesn't have "gears" in the conventional sense, but operates with two primary drive ratios from the electric motor and the engine.

    Drive SourceRatio
    Electric Motor Drive2.455
    Engine Drive (Direct)0.806

    Available Final Drive Ratios

    In a front-wheel-drive car like the Honda Accord, the term "axle ratio" is referred to as the "final drive ratio." This is a fixed gear set within the transaxle that multiplies the torque one last time before it is sent to the drive wheels. Unlike a pickup truck, these ratios are not selectable options but are specifically paired to each engine and transmission combination from the factory.

    Final Drive RatioAvailable WithBest For
    4.8111.5L Turbo w/ CVTBalanced performance and economy
    3.5522.0L Turbo w/ 10-Speed ATFuel economy and highway cruising
    3.8952.0L Hybrid w/ e-CVTCity efficiency and electric torque

    How to Identify Your Final Drive Ratio

    Identifying the final drive ratio in your 2021 Accord is straightforward, as it's determined entirely by the powertrain.

    • Check Your Trim Level and Engine: The easiest method is to know your car's configuration. If you have the 1.5T engine, you have the 4.811 ratio. If you have the 2.0T, you have the 3.552 ratio. If you drive a Hybrid, your effective final drive is 3.895.
    • VIN Decoder: The most definitive way is to use an online VIN decoder. Your vehicle's VIN contains information about its factory-installed equipment, including the specific engine and transmission model, which will confirm your final drive ratio.

    Unlike some domestic trucks and SUVs, Honda does not use axle codes on a door-jamb sticker (an RPO code sheet is a GM feature) or metal tags on the differential housing to identify the ratio.

    Towing vs. MPG Impact

    It is critical to note that Honda does not rate or recommend the 2021 Accord for towing of any kind in North America. Attempting to tow a trailer with your Accord can cause severe damage to the transmission, suspension, and chassis, and is a significant safety risk.

    However, for academic purposes, it's useful to understand how final drive ratios work. The number (e.g., 4.811) represents how many times the driveshaft (or transaxle output shaft) turns for every one rotation of the wheels.

    • Numerically Higher Ratios (e.g., 4.811): These ratios provide better torque multiplication. This leads to quicker acceleration from a stop. The trade-off is that the engine must spin at a higher RPM at cruising speeds, which can slightly increase fuel consumption.
    • Numerically Lower Ratios (e.g., 3.552): These are often called "taller" gears. They are ideal for highway fuel economy because they allow the engine to operate at a much lower, more efficient RPM when cruising at speed. The 2.0T Accord uses its powerful engine and 10-speed gearbox to handle acceleration, allowing for a taller final drive that enhances its capability as a highway cruiser.

    Common Issues

    The transmissions used in the 2021 Honda Accord are generally considered robust and reliable. There are no widespread, documented "common issues" for this model year. However, like any complex mechanical component, their longevity is directly tied to proper maintenance.

    • Fluid Maintenance: The most important factor in transmission health is regular fluid changes. Both the CVT and 10-speed automatic transmissions require specific fluids (Honda HCF-2 for the CVT, Honda ATF DW-1 for the 10-speed). Following the maintenance schedule outlined in your owner's manual is the best way to prevent premature wear and ensure a long service life.
    • CVT Durability: While modern CVTs are far more durable than early designs, they can be sensitive to neglect. Sticking to the factory maintenance interval for fluid services is crucial for preserving the health of the internal belt and pulleys.

    If you ever feel a shudder, hesitation, or hear a whining or grinding noise from your driveline, it's important to have it inspected by a professional.

    Find a driveline shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2021 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-25.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email