2021 Honda Accord Spark Plug Guide
An ASE-certified technician's guide to OEM part numbers, gap/torque specs, and replacement tips for the 2021 Honda Accord.
Working on this 2021 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference: 2021 Honda Accord Spark Plugs
| Engine | OEM Plug P/N | Aftermarket P/N (NGK / Denso) | Gap (in / mm) | Torque (lb-ft / Nm) | Interval (miles) |
|---|---|---|---|---|---|
| 1.5L Turbo (L15BE) | Honda 12290-6A0-A01 | NGK 91784 / Denso 3511 | 0.030 in / 0.8 mm | 16 lb-ft / 22 Nm | 100,000 |
| 2.0L Turbo (K20C4) | Honda 12290-59B-003 | NGK 94124 / Denso -- | 0.031 in / 0.8 mm | 16 lb-ft / 22 Nm | 100,000 |
| 2.0L Hybrid (LFB1) | Honda 12290-6P6-A01 | NGK 93259 / Denso 5361 | 0.024 in / 0.6 mm | 16 lb-ft / 22 Nm | 105,000 |
Why the Right Plug Matters
The humble spark plug is a critical component for the health and efficiency of your Honda's engine. It's responsible for igniting the air-fuel mixture in the combustion chamber thousands of times per minute. Using the correct plug ensures optimal performance, fuel economy, and engine longevity. Key factors include heat range and electrode material.
- Heat Range: This refers to the plug's ability to dissipate heat from the combustion chamber. A plug that is too "hot" (dissipates heat too slowly) can lead to pre-ignition or detonation, which can cause severe engine damage. A plug that is too "cold" (dissipates heat too quickly) can develop carbon fouling, leading to misfires. The factory-specified plugs for your Accord are precisely chosen for its engine's thermal characteristics.
- Electrode Material: The 2021 Accord, like most modern vehicles, uses Iridium-tipped spark plugs from the factory. Iridium is an extremely hard and dense precious metal with a very high melting point. This allows for a very fine center electrode, which requires less voltage to create a spark, resulting in a more consistent and efficient spark event. While older vehicles often used copper or platinum plugs with shorter lifespans, the iridium plugs in your Accord are designed for an extended service interval of around 100,000 miles.
How to Gap a Spark Plug
Properly gapping a spark plug is crucial for a strong, healthy spark. The "gap" is the distance between the center electrode and the ground electrode.
Iridium plugs, like those specified for your Accord, typically come pre-gapped from the manufacturer. It is always best practice to verify this gap before installation. Use a wire-loop or feeler gauge tool. Never use the cheap "disc-style" gappers, as they can put pressure on the fragile fine-wire center electrode and damage it.
To check the gap, slide the correct wire or feeler gauge between the electrodes. It should slide through with slight resistance. If an adjustment is needed, do not pry against the center electrode. Instead, gently bend the ground electrode (the L-shaped metal piece at the top) toward or away from the center electrode using a dedicated notch on a gapping tool. Make tiny adjustments and re-check frequently until the correct gap is achieved.
Replacement Procedure Tips for 2021 Accord
Replacing the spark plugs on the 1.5L and 2.0L engines in the 2021 Accord is a straightforward job, as they use a modern coil-on-plug ignition system.
-
Coil-on-Plug Removal: Each spark plug has an individual ignition coil sitting directly on top of it. To access the plug, first disconnect the electrical connector from the coil. Then, remove the single hold-down bolt (typically 10mm). The coil can then be gently twisted and pulled straight up to remove it.
-
The Anti-Seize Debate: Historically, technicians applied a light coat of anti-seize compound to the spark plug threads to prevent them from seizing in the aluminum cylinder head. However, major manufacturers like NGK and Denso now use a special trivalent plating (it has a slightly matte, chrome-like finish) on their plug threads. This plating provides its own anti-seize and torque-regulating properties. Applying additional anti-seize can act as a lubricant, leading you to accidentally over-torque the spark plug, which can stretch the plug's metal shell or damage the cylinder head threads. For factory NGK or Denso plugs, it's recommended to install them dry, with no anti-seize.
-
Dielectric Grease: While you should skip anti-seize on the threads, it's wise to apply a small amount of dielectric grease to the inside of the ignition coil boot. This grease does not conduct electricity; it helps seal the boot against the spark plug's porcelain, keeping moisture out and preventing the boot from getting stuck to the plug over time.
Known Issues
Unlike certain engines with notorious spark plug-related problems (such as the breakage of two-piece plugs in older Ford 3-valve modular engines), the K-series and L-series engines in the 2021 Honda Accord have no widespread, known issues regarding spark plug service. The design is robust, and as long as you use the correct high-quality plugs, proper tools, and follow the correct torque specification (16 lb-ft / 22 Nm), the job should be trouble-free.
Need plugs replaced? Find a shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2021 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2021 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-30.