Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Bulb Sizes (Headlight, Tail, Fog)

    2021 Honda Accord Bulb Sizes: The Complete Repairius.com Guide

    Everything on this vehicle

    Working on this 2021 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    LocationBulb SizeType
    Low Beam (LX, Sport, EX-L)H11Halogen
    Low Beam (Touring, Sport 2.0T, EX-L 2.0T)LEDOEM LED Assembly
    High Beam (LX, Sport, EX-L)9005Halogen
    High Beam (Touring, Sport 2.0T, EX-L 2.0T)LEDOEM LED Assembly
    Fog Light (Optional)H8/H11Halogen
    Daytime Running Light (DRL) (LX, Sport, EX-L)P13WHalogen
    Daytime Running Light (DRL) (Touring, Sport 2.0T, EX-L 2.0T)LEDOEM LED Assembly
    Front Turn Signal7440A / 7443AHalogen / LED (Varies by trim)
    Rear Turn Signal7440A / 7443AHalogen / LED (Varies by trim)
    Brake Light7443Halogen / LED (Varies by trim)
    Tail LightLEDOEM LED Assembly
    Reverse Light7440Halogen
    License Plate194 / T10Halogen
    Front Side Marker194 / T10Halogen
    Rear Side MarkerLEDOEM LED Assembly
    Dome LightDE3175Halogen
    Map Light194 / T10Halogen

    For 2021 Honda Accord owners looking to replace a burnt-out bulb or upgrade their lighting, knowing the correct bulb size and type is essential. The 2021 Accord, depending on its trim level, comes with a mix of halogen and LED lighting from the factory. This guide provides a comprehensive breakdown of all common bulb sizes, noting any variations for different trims.

    OEM Lighting Differences by Trim

    It's crucial to understand that not all 2021 Honda Accords use the same lighting technology. Lower trims like the LX, Sport 1.5T, and EX-L (1.5T) typically feature halogen bulbs for their low beams, high beams, and DRLs. These models will use standard replaceable bulbs such as H11 for low beams and 9005 for high beams. The DRLs on these trims often utilize a P13W halogen bulb.

    In contrast, higher trim levels, including the Touring, Sport 2.0T, and EX-L 2.0T models, often come equipped with full LED headlight assemblies from the factory. For these trims, the low beam, high beam, and DRL functions are integrated into non-serviceable LED units. This means that if an LED component fails in these assemblies, the entire headlight unit typically needs to be replaced, rather than just a bulb.

    Fog lights are often an optional feature or standard on higher trims. When present, they commonly use an H8 or H11 halogen bulb.

    Turn signals, brake lights, and tail lights can also vary. While many trims will use halogen 7440A or 7443A bulbs for front and rear turn signals, and 7443 for brake lights, some higher trims may feature LED equivalents or integrated LED assemblies for these functions. Tail lights on most 2021 Accords are typically LED from the factory, integrated into the tail light housing. Reverse lights usually remain halogen, using a 7440 bulb. License plate and side marker lights are often 194/T10 halogen bulbs, though some rear side markers might be LED.

    Interior lighting, such as the dome and map lights, commonly utilizeshalogen bulbs like DE3175 for the dome and 194/T10 for the map lights across most trims.

    LED vs Halogen Upgrade Considerations

    Upgrading your 2021 Honda Accord's halogen bulbs to LED can offer significant benefits, including brighter light, a whiter color temperature, and longer lifespan. However, there are several factors to consider before making the switch:

    • CANBUS Errors: Modern vehicles like the 2021 Accord feature a CANBUS (Controller Area Network Bus) system that monitors the electrical resistance of bulbs. LED bulbs draw less power than halogens, which can trick the CANBUS system into thinking a bulb is out, triggering a "bulb out" warning on your dashboard. To prevent this, you'll need LED bulbs with built-in CANBUS decoders or external load resistors.
    • Adapters Needed: Some LED conversion kits may require specific adapters to properly seat the LED bulb into the headlight housing or to connect to the factory wiring harness. Always ensure the LED kit you choose is compatible with your Accord's specific bulb type and includes any necessary adapters.
    • Beam Pattern: Not all LED bulbs are designed to mimic the exact beam pattern of their halogen counterparts in a reflector housing. Poorly designed LED bulbs can create glare for oncoming drivers or result in a scattered, ineffective light output. Look for LED bulbs that are specifically designed for your Accord's housing type and have a good reputation for beam pattern.
    • Heat Dissipation: LED bulbs generate heat, and effective heat dissipation is crucial for longevity. Many high-quality LED bulbs feature built-in fans or large heatsinks. Ensure there's adequate space behind the headlight housing for proper airflow.

    How to Replace Each Bulb (Tips)

    Exterior Bulbs

    • Low Beam/High Beam (Halogen): Access is usually from the rear of the headlight assembly under the hood. Twist the old bulb counter-clockwise to remove, unplug the connector, and reverse the process for the new bulb. Avoid touching the glass of the new halogen bulb.
    • Fog Light: Often requires access from underneath the car or by partially removing the fender liner. Twist to remove, unplug, and replace.
    • DRL (Halogen): Similar to low/high beams, access from the rear of the headlight assembly.
    • Front Turn Signal: Typically accessed from the rear of the headlight housing or by reaching behind the bumper. Twist the socket to remove, pull out the bulb, and push in the new one.
    • Rear Turn Signal/Brake/Reverse Light: Access is usually gained by opening the trunk and removing a trim panel or fasteners to get to the tail light assembly. The specific bulb sockets can then be twisted out.
    • License Plate Light: Found on the trunk lid or bumper. Use a small flat-head screwdriver to carefully pry open the lens cover, then pull out the old bulb and push in the new one.
    • Side Marker (Front/Rear): Front side markers are often integrated into the headlight or fender. Rear side markers are usually part of the tail light assembly. Access will vary.

    Interior Bulbs

    • Dome Light/Map Light: Use a plastic trim removal tool to carefully pry open the lens cover. Pull out the old bulb and push in the new one. Refer to your owner's manual for specific instructions on accessing these covers.

    Always consult your 2021 Honda Accord owner's manual for specific bulb replacement procedures and safety warnings.

    Common Lighting Issues for This Generation

    The 2021 Honda Accord, being a relatively new model, exhibits fewer widespread "common lighting issues" compared to older generations. However, some owners have reported:

    • Premature Halogen Bulb Burnout: While not necessarily a defect, some owners with halogen headlights might experience bulbs burning out sooner than expected. This can sometimes be attributed to vibrations, voltage fluctuations, or even touching the glass of the bulb during installation.
    • Condensation in Headlight Assemblies: Occasionally, condensation can be observed inside headlight or taillight assemblies. Minor condensation that clears up naturally is usually considered normal. Persistent or excessive moisture, however, could indicate a seal issue and might require inspection.
    • LED Malfunctions (Higher Trims): While rare, if an OEM LED component within the headlight or taillight assembly fails on higher trims, it often necessitates the replacement of the entire expensive assembly, as the LEDs are not individually serviceable.
    • CANBUS Errors after LED Upgrades: As mentioned, if aftermarket LED bulbs are installed without proper CANBUS decoders, "bulb out" warnings on the dashboard are a common occurrence.

    Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2021 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email