2015 Honda CR-V Bulb Size Guide

Quick reference

LED vs halogen upgrade considerations

When upgrading your 2015 Honda CR-V to LED bulbs, there are a few things to keep in mind. While LED bulbs offer a brighter, more modern look, they can sometimes cause issues with your vehicle's electrical system. The most common issue is a "bulb out" warning on your dashboard. This is because LED bulbs draw less power than halogen bulbs, and your car's computer may think the bulb is burnt out. To fix this, you may need to install a CANBUS adapter or resistor. These are inexpensive and easy to install, but it's an extra step to be aware of.

Another thing to consider is the legality of LED headlight bulbs. While LED bulbs are becoming more common, some states have laws against using them in vehicles that were not originally equipped with them. Be sure to check your local laws before upgrading your headlights.

Finally, it's important to choose high-quality LED bulbs from a reputable brand. Cheaper bulbs may not be as bright or last as long as more expensive ones. They may also cause flickering or other issues. When in doubt, it's always best to consult with a professional installer.

How to replace each bulb

Headlight bulbs: To replace the headlight bulbs, you'll need to access the back of the headlight assembly. This can usually be done from under the hood, but you may need to remove a plastic cover or two. Once you have access to the bulb, simply twist it a quarter-turn to remove it. Then, disconnect the wiring harness and install the new bulb.

Fog light bulbs: The fog light bulbs are located in the lower front bumper. To access them, you'll need to remove a plastic panel from under the bumper. Once the panel is removed, you'll have easy access to the bulb. Simply twist it to remove it and install the new one.

Turn signal, brake, and tail light bulbs: These bulbs are all located in the same assembly. To access them, you'll need to remove the tail light lens. This is usually held in place by a few screws. Once the lens is removed, you can access all of the bulbs. Simply twist them to remove them and install the new ones.

Reverse light bulbs: The reverse light bulbs are also located in the tail light assembly. Follow the same steps as for the turn signal, brake, and tail light bulbs to access and replace them.

License plate, side marker, dome, and map light bulbs: These bulbs are all relatively easy to access and replace. For the license plate and side marker lights, you may need to use a small screwdriver to pry off the lens. For the dome and map lights, the lens can usually be removed by hand.

Common lighting issues for this generation

The 2015 Honda CR-V is a reliable vehicle, but there are a few common lighting issues to be aware of. The most common issue is premature burnout of the low beam headlights. This is a known issue with this generation of CR-V, and Honda has issued a technical service bulletin (TSB) for it. If you're experiencing this issue, you may be able to get the bulbs replaced for free at your local Honda dealership.

Another common issue is flickering or intermittent operation of the interior lights. This can be caused by a loose connection or a faulty switch. If you're experiencing this issue, it's best to have it diagnosed by a professional.

Finally, some owners have reported issues with the daytime running lights (DRLs) not working properly. This can be caused by a number of things, including a burnt-out bulb, a blown fuse, or a faulty relay. If you're experiencing this issue, it's best to have it diagnosed by a professional.

Find a trusted shop on Repairius.