Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Oil Capacity & Filter

    2015 Honda CR-V Oil Capacity & Filter

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2015 Honda CR-V? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    The 2015 Honda CR-V takes 4.6 quarts (4.4 liters) of 0W-20 oil.

    Quick Answer

    • Oil Capacity: 4.6 quarts (4.4 liters) with filter change
    • Recommended Oil Weight: SAE 0W-20
    • Oil Specification: API Certified SN
    • Oil Filter Part Numbers:
      • OEM: 15400-PLM-A02
      • Fram: PH7317
      • Wix: 57356
      • Mobil 1: M1-110A

    Capacity by Engine Option

    For the 2015 model year, the CR-V was available with a single engine option in North America.

    EngineOil Capacity (with filter)Recommended Oil Weight
    2.4L K24W9 I44.6 qt (4.4 L)0W-20

    Oil Change Interval

    Honda's Maintenance Minder system will display a message on the instrument panel when it's time for an oil change. However, as a general guideline:

    • Normal Duty: 7,500–10,000 miles or 12 months
    • Severe Duty: 3,500–5,000 miles or 6 months (includes frequent short trips, driving in extreme temperatures, or towing)

    Drain Plug Torque

    • Drain Plug Torque: 29 ft-lbs (40 N-m)
    • Crush Washer: Always use a new 14mm crush washer (part number 94109-14000) to prevent leaks.

    How to Change the Oil

    1. Warm up the engine for a few minutes.
    2. Lift and support the vehicle safely.
    3. Place a drain pan under the oil pan.
    4. Remove the 17mm drain plug and let the oil drain completely.
    5. Remove the oil filter (it may be tight).
    6. Wipe the filter mounting surface clean and lightly oil the gasket of the new filter.
    7. Install the new filter and tighten it according to the manufacturer's instructions (usually hand-tight plus a quarter turn).
    8. Reinstall the drain plug with a new crush washer and torque to 29 ft-lbs.
    9. Fill the engine with 4.6 quarts of 0W-20 oil.
    10. Start the engine, check for leaks, and then check the oil level, topping off as needed.

    Common Issues / Tips

    This generation of CR-V is known for its reliability. The 2.4L direct-injected engine can be sensitive to oil quality, so always use a reputable brand of 0W-20 oil that meets API SN specifications. The oil filter can be difficult to access without a good filter wrench, so be prepared. Finally, resetting the Maintenance Minder is a crucial last step to keep track of your next service interval.

    Need an oil change? Find a trusted shop on Repairius.

    Need service on your Honda CR-V?

    Request service from shops in your area.

    More specs for the 2015 Honda CR-V

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email