2017 Honda CR-V Oil Capacity & Filter Specs

The 2017 Honda CR-V takes 3.7 quarts (3.5 liters) of 0W-20 engine oil with a new filter.

Quick Answer

• Oil Capacity: 3.7 US Quarts (3.5 Liters) with filter
• Recommended Oil Weight: 0W-20
• Oil Type Specification: API Premium Grade Draining & Filling or Honda HFS-A20
• Oil Filter (OEM Part Number): 15400-PLM-A02
• Oil Filter (Aftermarket Cross-Reference):
  • Fram: PH7317
  • Wix: 51356
  • Mobil 1: M1-110

Capacity by Engine Option

For the 2017 model year, the Honda CR-V was available with two engine options, but both shared the same oil capacity.

Oil Change Interval

Honda recommends adhering to the Maintenance Minder system for oil change intervals, which can vary based on driving conditions and habits. However, general guidelines are:

• Normal Duty: Typically every 7,500 - 10,000 miles or 12 months, whichever comes first.
• Severe Duty: If you frequently drive in extreme temperatures, tow, drive in dusty conditions, or make short trips, consider changing your oil every 3,000 - 5,000 miles or 6 months.

Always check your vehicle's Maintenance Minder system for the most accurate oil change guidance.

Drain Plug Torque

The oil drain plug on the 2017 Honda CR-V should be torqued to 29 lb-ft (39 N·m). It is highly recommended to replace the crush washer with every oil change to ensure a proper seal and prevent leaks. The OEM crush washer part number is typically 94109-14000.

How to Change the Oil

Changing the oil on your 2017 Honda CR-V is a straightforward process:

1. Preparation: Gather your tools: new oil, new oil filter, oil filter wrench, drain pan, socket wrench for the drain plug, new crush washer, and rags.
2. Warm-up: Drive the vehicle for a few minutes to bring the oil to operating temperature, ensuring it drains more easily.
3. Lift and Secure: Safely lift the front of the vehicle using a jack and secure it with jack stands.
4. Locate Drain Plug: Place the drain pan under the oil pan, then use a 17mm socket wrench to remove the drain plug.
5. Drain Oil: Allow all the old oil to drain completely. Inspect the old crush washer.
6. Replace Filter: Remove the old oil filter using an oil filter wrench. Apply a thin layer of new oil to the rubber gasket of the new filter before screwing it on hand-tight.
7. Reinstall Drain Plug: Install the new crush washer on the drain plug and reinstall it into the oil pan. Torque to 29 lb-ft (39 N·m).
8. Add New Oil: Lower the vehicle. Locate the oil filler cap on top of the engine and add 3.7 quarts of 0W-20 oil.
9. Check Level: Start the engine and let it run for a minute, then shut it off. Wait a few minutes for the oil to settle, then check the dipstick. Add more oil if necessary.
10. Reset Maintenance Minder: Follow your owner's manual for instructions on how to reset the oil life monitor.

Common Issues / Tips

• Oil Dilution (1.5L Turbocharged Engine): Some 2017 CR-V models with the 1.5L turbocharged engine have experienced issues with oil dilution, where gasoline can mix with the engine oil. This can degrade the oil's lubricating properties. Regular oil changes and monitoring your oil level/condition are crucial. Honda released software updates to address this, so ensure your vehicle's ECM has the latest calibration.
• Proper Oil Type: Using the correct 0W-20 viscosity is critical for the Variable Valve Timing (VVT) systems and overall engine longevity.
• Filter Quality: Always use a high-quality oil filter from a reputable brand to ensure proper filtration and flow.
• Crush Washer: Never reuse the old crush washer. It's designed to deform and provide a leak-free seal only once.
• Underbody Cover: The 2017 CR-V has an underbody splash shield that needs to be removed to access the drain plug and oil filter. This usually involves removing several small bolts or clips.

Need an oil change? Find a trusted shop on Repairius.