Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Brake Pad & Rotor Specs

    2022 Kenworth W900 Brake Pad & Rotor Specs

    Heavy-duty air disc brake specs, part numbers, and maintenance intervals for the 2022 Kenworth W900.

    Working on this 2022 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick answer — 2022 Kenworth W900

    Caliper bracket torque
    Carrier to axle: 350 - 400 lb-ft (Verify exact spec with dealer based on axle)
    Caliper slide-pin torque
    Guide pin bolts: ~40 lb-ft (Always use new Bendix hardware and specs)

    From the table below. Confirm with your owner's manual for your exact engine.

    As an ASE-certified master technician, I often get questions about transitioning from passenger vehicles to heavy-duty commercial trucks. When it comes to the 2022 Kenworth W900, we are dealing with a legendary Class 8 tractor. Unlike passenger cars or light trucks, the W900 utilizes a heavy-duty air brake system. In recent years, Air Disc Brakes (ADB)—specifically the Bendix ADB22X or Meritor EX+ systems—have become the industry standard over traditional S-cam drum brakes, offering superior stopping power and shorter stopping distances.

    If your W900 is equipped with air disc brakes, the maintenance conceptually mirrors standard disc brakes (pads, rotors, calipers), but the scale, specifications, and components are vastly different. Below is the comprehensive brake specification guide for a 2022 Kenworth W900 equipped with air disc brakes.

    Quick reference

    Note: The 2022 Kenworth W900 is a Class 8 commercial vehicle. Passenger car brands like Akebono, Bosch, Wagner, and Power Stop do not manufacture pads for this application. Typical heavy-duty suppliers include Bendix, Meritor, Haldex, and Marathon. Always verify exact part numbers with your Kenworth dealer using your VIN, as axle configurations vary.

    SpecificationDetails
    Front pad PN (OEM + Aftermarket)Bendix K070796 (ADB22X) / Meritor MMD1369 / Verify with dealer
    Rear pad PNBendix K070796 (if equipped with ADB22X on drive axles) / Verify with dealer
    Front rotor diameter & new thickness430 mm (16.9") diameter / 45 mm (1.77") new thickness
    Front rotor minimum thickness37 mm (1.46") discard thickness
    Rear rotor diameter & new thickness430 mm (16.9") diameter / 45 mm (1.77") new thickness
    Rear rotor minimum thickness37 mm (1.46") discard thickness
    Caliper piston count (front/rear)2 per caliper (Bendix ADB22X) / 2 per caliper (rear)
    Caliper bracket torqueCarrier to axle: 350 - 400 lb-ft (Verify exact spec with dealer based on axle)
    Caliper slide-pin torqueGuide pin bolts: ~40 lb-ft (Always use new Bendix hardware and specs)
    Brake fluid spec (DOT 3/4)N/A - Air Brake System (Uses compressed air, no brake fluid)

    How to choose pads

    Selecting brake pads for a heavy-duty truck like the Kenworth W900 is completely different from choosing ceramic or semi-metallic pads for a commuter car. Federal Motor Vehicle Safety Standards (FMVSS 121) mandate Reduced Stopping Distance (RSD) compliance.

    1. OEM Standard Friction: For most over-the-road (OTR) applications, sticking with the OEM Bendix or Meritor friction material ensures your truck meets original RSD requirements. These are heavily engineered semi-metallic composites designed to handle 80,000+ lb gross weights without severe brake fade.
    2. Severe Duty / Vocational: If your W900 is set up for heavy haul, logging, or dump applications, you may want to look into severe-duty friction formulas. These pads are designed to withstand higher temperature thresholds and resist glazing during frequent, heavy brake applications.
    3. Aftermarket Brands: While you won't find passenger brands here, reputable aftermarket commercial brands like Haldex, Marathon, and Meritor offer excellent alternatives. Ensure any aftermarket pad is explicitly labeled as RSD-certified.

    Typical service life

    Because commercial trucks employ engine braking (Jake brakes) to handle the bulk of deceleration, foundation brakes often last significantly longer than those on light-duty vehicles.

    • Over-the-Road (Highway): It is not uncommon for steer axle pads on an ADB-equipped W900 to last 300,000 to 400,000 miles. Drive axle pads can often exceed 400,000 miles, depending on the driver's habits and engine brake usage.
    • Vocational / Heavy Haul: For off-highway or heavy-haul routes with frequent stopping, pad life drops considerably, often requiring a "pad-slap" or replacement interval every 100,000 to 150,000 miles.
    • Rotors: Air disc brake rotors typically survive two to three pad life cycles before reaching their minimum machine or discard thickness (37mm for standard 45mm rotors).

    Common brake issues for this generation

    While air disc brakes provide phenomenal stopping power and lack the brake-fade characteristics of traditional drum brakes, they do have a few quirks to watch out for on the W900:

    • Seized Guide Pins: The most common failure on ADB systems is the caliper failing to slide due to contaminated or seized guide pins. If the boots tear, moisture enters the slide mechanism, leading to uneven pad wear and dragged brakes.
    • Heat-Cracked Rotors: Though highly robust, heavy braking on steep grades can cause thermal shock. Hairline surface cracks are normal and acceptable, but if cracks extend to the edge of the rotor or through the cooling vents, the rotor must be replaced immediately.
    • Air Leaks at Brake Chambers: While not a pad or rotor issue, the Type 24 or Type 30 air brake chambers actuating the calipers can develop diaphragm leaks over time, reducing clamping force on that wheel end.

    Brake job cost estimate

    Replacing brakes on a Class 8 truck is an investment, both in parts and labor. Because of the size and weight of the components (a single ADB rotor can weigh over 65 lbs), specialized equipment is often required.

    • Pads Only (Per Axle): A high-quality set of OEM ADB pads typically costs between $150 and $250 per axle. With labor (about 1 to 1.5 hours per axle), expect to pay around $300 to $450 per axle.
    • Pads and Rotors (Per Axle): Heavy-duty rotors range from $180 to $300 each. Replacing pads and rotors on a single axle requires removing the hub in many cases. Factoring in parts, wheel seals, fresh hub oil, and 3 to 4 hours of labor, expect a complete axle brake job to cost between $800 and $1,400 per axle.

    Always ensure your mechanic uses properly calibrated torque wrenches and replaces the caliper retaining hardware during every service.

    Find a trusted brake shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2022 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-10-08.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email