2022 Kenworth W900 Fuse Box Diagram & Amperage
Your comprehensive guide to locating and understanding the fuse boxes in your Kenworth W900.
Working on this 2022 Kenworth W900? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Answer
The 2022 Kenworth W900 typically has multiple fuse box locations to manage the extensive electrical systems found in a heavy-duty truck. You will generally find fuse boxes in these locations:
- Under-hood: Often on the driver's side, near the firewall or battery box.
- Dash Kick-Panel (Driver's Side): Behind a removable panel on the driver's side of the dashboard.
- Cab Interior (Passenger Side): Sometimes an additional fuse panel can be found on the passenger side, often behind a kick panel or under the glove compartment.
Always refer to the specific fuse box lid or your owner's manual for the most accurate diagram for your truck's trim and configuration.
Under-Hood Fuse Box
This fuse box typically houses fuses and relays for major engine and chassis components, often including those related to the engine control module (ECM), ABS, and significant powertrain functions. Relay locations are also often part of this under-hood panel.
| Fuse # | Amp | Color | Circuit / Component Protected |
|---|---|---|---|
| F1 | 20A | Yellow | Engine Control Module (ECM) - Powertrain |
| F2 | 15A | Blue | ABS Control Unit |
| F3 | 30A | Green | Trailer Brake Controller |
| F4 | 25A | Clear | Headlights (Low Beam - Driver Side) |
| F5 | 25A | Clear | Headlights (Low Beam - Passenger Side) |
| F6 | 20A | Yellow | Headlights (High Beam - Driver Side) |
| F7 | 20A | Yellow | Headlights (High Beam - Passenger Side) |
| F8 | 10A | Red | Ignition Switch |
| F9 | 10A | Red | Fuel Pump Relay Control |
| F10 | 30A | Green | Starter Solenoid |
Common Relays in Under-Hood Box:
- Starter Relay: Engages the starter motor.
- ECM Relay: Powers the Engine Control Module.
- ABS Relay: Powers the Anti-lock Braking System.
- Main Power Relay: Supplies power to various circuits.
- Fuel Pump Relay: Controls power to the fuel pump.
Dash Kick-Panel Fuse Box (Driver's Side)
This fuse box often manages accessories and interior electrical components. This is a common location for fuses related to the instrument panel, radio, and various cabin features.
| Fuse # | Amp | Color | Circuit / Component Protected |
|---|---|---|---|
| F1 | 10A | Red | Radio/Infotainment System |
| F2 | 15A | Blue | Blower Motor |
| F3 | 20A | Yellow | A/C Clutch |
| F4 | 10A | Red | Instrument Cluster / Gauges |
| F5 | 15A | Blue | Wipers |
| F6 | 20A | Yellow | Power Windows |
| F7 | 10A | Red | Turn Signals / Hazard Lights |
| F8 | 15A | Blue | Brake Lights (Stop Lamps) |
| F9 | 10A | Red | Tail Lights / Parking Lights |
| F10 | 20A | Yellow | Power Outlet / Cigar Lighter (12V) |
| F11 | 10A | Red | Airbag System |
| F12 | 10A | Red | Diagnostic Port (OBD-II) |
Common Relays in Dash Kick-Panel Box:
- Blower Relay: Controls the HVAC blower motor.
- Accessory Relay: Powers various interior accessories.
- Wiper Relay: Controls the windshield wipers.
Cab Interior Fuse Box (Passenger Side - Varies by Trim)
Some Kenworth W900 models, especially those with extensive cabin amenities, may feature an additional fuse panel on the passenger side. This panel often handles less critical, convenience-related electrical circuits.
| Fuse # | Amp | Color | Circuit / Component Protected |
|---|---|---|---|
| F1 | 10A | Red | Interior Dome Lights |
| F2 | 15A | Blue | Sleeper Cab Power Outlet |
| F3 | 10A | Red | Navigation System (if equipped) |
| F4 | 10A | Red | CB Radio / Auxiliary Communications |
| F5 | 15A | Blue | Refrigerator / Auxiliary Power (Sleeper) |
How to Test a Fuse
Testing a fuse is a straightforward process and a good first step when troubleshooting an electrical issue. Here's how:
- Locate the Fuse Box: Identify the correct fuse box corresponding to the component that's not working.
- Identify the Suspect Fuse: Consult the fuse box diagram (usually under the lid or in your owner's manual) to find the fuse for the circuit you're testing.
- Visual Inspection: Most modern fuses have a clear plastic body. Look for a broken wire or discoloration inside the fuse. If it's visibly broken, it's blown.
- Use a Fuse Tester or Multimeter:
- Fuse Tester: Many automotive fuse testers have probes that you touch to the small metal contacts on the top of the fuse. If the light on the tester illuminates, the fuse is good. If not, it's blown.
- Multimeter: Set your multimeter to continuity mode (often indicated by a speaker symbol). Touch the probes to the metal contacts on top of the fuse. A good fuse will show continuity (the multimeter will beep or show a reading close to zero ohms). A blown fuse will show no continuity.
- Replace if Blown: If the fuse is blown, replace it with a new fuse of the exact same amperage (A) rating. Never use a fuse with a higher amperage rating as this can lead to serious electrical damage or fire.
Common Blown Fuses on This Vehicle
Due to the demanding nature of heavy-duty trucking and the extensive electrical systems, certain fuses might be more prone to blowing than others on a Kenworth W900. When you encounter an electrical issue, these are good places to start your investigation:
- Cigar Lighter / 12V Power Outlets: These are frequently blown due to overloads from charging phones, operating auxiliary devices, or shorts in connected equipment. If your accessories aren't powering on, check this fuse first.
- Trailer Brake Controller: Given the primary function of a W900, issues with trailer lighting or braking systems can sometimes lead to the trailer brake controller fuse blowing, especially if there's a short in the trailer's wiring. If your trailer brakes are erratic or non-functional, check this fuse.
- Blower Motor: The blower motor for the HVAC system draws significant current, especially on higher settings. If your fan isn't working, this fuse is a common culprit.
- Headlights: While less common, a short in the headlight circuit or a faulty bulb drawing too much current could cause a headlight fuse to blow. If one of your headlights is out, verify the bulb first, then check the fuse.
- Radio/Infotainment: Aftermarket installations or even an internal short in the radio unit can sometimes cause this fuse to blow. If your radio is dead, check its fuse.
What to Check First: Always start with the simplest checks. If a component isn't working, first ensure it
Before you pull a fuse on the 2022 Kenworth W900
- Use the label printed on the panel cover or the owner's manual for your exact build. Layouts change with options, model year and build date, so a chart for another truck can be wrong.
- Replace a blown fuse only with the same amp rating. A larger fuse can let wiring overheat.
- A fuse that blows again right away means a short or failing component downstream. Find the cause before replacing it again.
- A good fuse doesn't prove the circuit works — relays, grounds and connectors fail too.
- Many heavy trucks have more than one power distribution point (cab, under-hood or near the batteries), and some circuits use circuit breakers instead of fuses. Some systems have 24-volt starting circuits; confirm the voltage before testing.
- Disconnect the battery before working near high-current fuses or cables.
Learn more: How fuses, relays and truck electrical systems work · Find mobile truck repair
Need service on your Kenworth W900?
Your vehicle and question are already filled in — just add your location.
More specs for the 2022 Kenworth W900
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2022 Kenworth W900 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-05.