Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission & Axle Gear Ratios

    2022 Kenworth W900 Transmission & Axle Gear Ratios

    Working on this 2022 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Transmission gear ratios

    The 2022 Kenworth W900, a legendary workhorse, offers a variety of transmission options to suit diverse hauling needs. While specific internal ratios can vary slightly based on the exact transmission model and build, here are common gear ratios for popular manual and automated manual transmissions found in the W900.

    Eaton Fuller 18-Speed Manual (RTLO- series)

    This robust transmission is a long-standing favorite for its versatility and durability.

    GearRatio
    1st14.40
    2nd12.02
    3rd9.94
    4th8.27
    5th6.84
    6th5.72
    7th4.75
    8th3.96
    9th3.20
    10th2.67
    11th2.20
    12th1.84
    13th1.54
    14th1.28
    15th1.00
    16th0.84
    17th0.73
    18th0.60
    Reverse (low)15.06
    Reverse (high)3.96

    Eaton Fuller Advantage 10-Speed Automated Manual (Endurant series)

    Designed for efficiency and ease of operation, these transmissions are increasingly popular.

    GearRatio
    1st11.75
    2nd7.48
    3rd5.25
    4th3.82
    5th2.80
    6th2.05
    7th1.50
    8th1.00
    9th0.81
    10th0.60
    Reverse12.01

    Available axle ratios

    The Kenworth W900 offers a wide range of axle ratios, allowing fleets and owner-operators to fine-tune their truck for specific applications, from heavy-haul to long-distance fuel economy. Common axle manufacturers include Meritor and Dana Spicer.

    RatioAvailable With (engine/trim/package)RPO/Axle CodeBest For
    2.64PACCAR MX-13 / Cummins X15 Efficiency / Aerodynamic PackagesVaries by manufacturerFuel Economy / Light Loads
    3.08PACCAR MX-13 / Cummins X15 Efficiency / General FreightVaries by manufacturerBalanced / Efficient Freight
    3.36PACCAR MX-13 / Cummins X15 Performance / Regional HaulVaries by manufacturerBalanced / Moderate Towing
    3.55Cummins X15 Performance / Heavy Haul Prep / ConstructionVaries by manufacturerTowing / Heavy Haul
    3.70Cummins X15 Performance / Vocational / Off-RoadVaries by manufacturerHeavy Towing / Vocational
    3.91Cummins X15 Performance / Severe Duty / LoggingVaries by manufacturerExtreme Towing / Off-Road
    4.10Cummins X15 Performance / Extreme Duty / Special ApplicationsVaries by manufacturerMaximum Towing Capacity

    How to identify your axle ratio

    Identifying your Kenworth W900's axle ratio is crucial for proper maintenance, parts ordering, and understanding your truck's performance characteristics. Here are the primary methods:

    • Door-Jamb RPO Sticker: For Kenworth trucks, the information you need is typically found on a sticker located on the driver's side door jamb or inside the glove compartment. This sticker will list various RPO (Regular Production Option) codes. You will need to decipher these codes to find the axle ratio. Look for codes that begin with a letter followed by numbers (e.g., "MERITOR MT-40-14X" and then a ratio like "3.55"). Sometimes the ratio is explicit at the end of the axle model number.
    • Axle Tag: Most heavy-duty axles from manufacturers like Meritor and Dana Spicer will have a metal tag bolted to one of the differential housing bolts. This tag typically contains the axle model number, serial number, and the gear ratio stamped directly on it. It might be dirty or rusty, so cleaning may be necessary to read it properly.
    • VIN Decoder: While not always providing the direct axle ratio, a comprehensive Kenworth VIN decoder can sometimes provide build sheet information that would list the installed axle specifications. This is usually more of a last resort or for double-checking.

    Towing vs MPG impact

    The choice of axle ratio has a significant impact on your W900's performance, particularly concerning towing capability and fuel economy:

    • Numerically Lower Ratio (e.g., 2.64, 3.08): These "taller" ratios mean the driveshaft spins fewer times for each rotation of the wheels. This results in lower engine RPMs at highway speeds, leading to better fuel economy. However, they reduce torque Multiplication at the wheels, making them less suitable for heavy towing, steep grades, or frequent stop-and-go driving. Trucks with these ratios are best for light loads and long-haul operations on flat terrain.
    • Numerically Higher Ratio (e.g., 3.70, 4.10): These "shorter" ratios cause the driveshaft to spin more times for each wheel rotation. This increases torque multiplication, providing greater pulling power necessary for heavy loads, off-road applications, and navigating challenging terrain. The trade-off is higher engine RPMs at cruising speeds, which can negatively impact fuel economy. These ratios are ideal for vocational applications, construction, and heavy-haul trucking.
    • Balanced Ratios (e.g., 3.36, 3.55): These ratios offer a good compromise between fuel efficiency and pulling power, making them suitable for a wide range of general freight and regional hauling applications.

    Common issues

    Heavy-duty truck axles and transmissions are built to withstand immense stress, but like any mechanical component, they can experience specific wear and issues over time:

    • Ring & Pinion Whine: A persistent whine that changes with speed and load often indicates wear or improper setup of the ring and pinion gears within the differential. This can be due to backlash issues, worn teeth, or insufficient lubrication.
    • Carrier Bearing Wear: The bearings supporting the differential carrier can wear out, leading to growling noises, especially during acceleration or deceleration. If left unaddressed, this can cause significant damage to the differential.
    • Limited-Slip Clutch Wear (if equipped): For W900s equipped with limited-slip differentials, the clutch packs can wear out over time. Symptoms include a popping or clunking noise during turns, reduced traction in slippery conditions, or a noticeable difference in power delivery between the drive wheels.
    • Transmission Hard Shifting/Missing Gears: While more related to the transmission itself, these can sometimes be misinterpreted as axle issues. For manual transmissions, worn synchronizers, clutch issues, or external linkage problems can cause hard shifting. Automated manuals can experience issues with actuators, sensors, or internal clutches.

    Find a driveline shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2022 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-22.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email