Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Key Fob Programming

    2022 Kenworth W900 Key Fob Programming Guide

    Step-by-step instructions, battery replacement, and programming facts for your heavy-duty Kenworth.

    Working on this 2022 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    As an ASE-certified electrical technician and locksmith, I get a lot of questions about modern heavy-duty truck platforms. The 2022 Kenworth W900 is an absolute legend on the road, but its electronic architecture is thoroughly modern. Unlike passenger vehicles of the past, Paccar (Kenworth’s parent company) has integrated strict security protocols into their cab electrical systems. If you are looking to replace or program a key fob for your W900, you will quickly find that the process requires specialized software.

    Here is your comprehensive guide to key fob replacement, programming, and battery maintenance for the 2022 Kenworth W900.

    Quick reference

    ItemDetail
    FCC IDVaries by specific module (Verify via VIN at dealer)
    OEM Fob PNVaries by build sheet / VIN
    Aftermarket OptionsHighly limited; OEM recommended
    Battery TypeCR2032 (Typical)
    Programmable On-Board?No (Requires Paccar ESA / DAVIE4)
    Cuts Required?Yes (for ignition key)

    Note: Heavy-duty truck parts are highly specific to the vehicle's build sheet. Always provide your VIN to the parts counter to ensure you get the exact matching remote for your truck's cab controller.

    Step-by-step on-board programming

    If you are hoping for a DIY "insert the key and turn the ignition five times" procedure, I have some bad news. The 2022 Kenworth W900 does not support on-board DIY key fob programming.

    Modern Paccar vehicles utilize advanced Cab Electronic Control Units (CECU) and multiplexed wiring. To introduce a new key fob to the network, the technician must interface directly with the truck's computer.

    Here is what the actual programming process looks like when performed by a professional:

    1. Connect Diagnostic Interface: The technician connects a heavy-duty diagnostic link adapter (like a Nexiq USB-Link 2) to the truck's 9-pin diagnostic port.
    2. Launch Paccar Software: The technician opens Paccar ESA (Electronic Service Analyst) or DAVIE4 software.
    3. Access Cab Controller: The software establishes communication with the CECU.
    4. Initiate Pairing Mode: The technician navigates to the "Remote Keyless Entry" or security parameters and initiates the fob pairing sequence.
    5. Sync the Remotes: The technician follows the on-screen prompts, which usually involves pressing the lock/unlock buttons on the new fob so the CECU can capture the fob's unique rolling code.
    6. Verify Operation: The software confirms the pairing, and the technician tests all buttons (Lock, Unlock, and any auxiliary functions like lighting).

    Because this requires proprietary software and hardware, it is strictly a professional-level job.

    Battery replacement

    While programming requires a professional, changing a dead battery is a quick DIY job. If your remote is losing range or requires multiple presses to work, replace the battery.

    1. Locate the seam: Look for the small notch or seam along the edge of the plastic fob housing.
    2. Pry open the case: Using a small flathead screwdriver or a non-marring plastic pry tool, gently separate the two halves of the shell.
    3. Remove the old battery: Note the orientation of the battery (usually the positive "+" side faces up or towards the back cover). Carefully pop out the old battery.
    4. Insert the new battery: Place a fresh CR2032 coin cell battery into the slot, matching the original polarity.
    5. Reassemble: Snap the two halves of the fob shell back together firmly. Test the remote to ensure it functions.

    Where to buy a replacement fob

    When it comes to commercial trucks, your purchasing options are a bit different than passenger cars.

    • Kenworth Dealership: This is the most reliable route. Because truck fobs vary so much by build sheet, the dealer can pull your VIN and order the exact Paccar part number. Pros: Guaranteed compatibility. Cons: Most expensive option, both for the part and the labor. Expect to pay $150 to $300+ for the fob and programming.
    • Heavy-Duty Mobile Locksmith: An automotive locksmith specializing in commercial fleets is often your best bet. Pros: They come to your truck stop, yard, or shop, minimizing downtime. They usually have the necessary Nexiq adapters and software. Cons: Still requires a service call fee.
    • Online (Amazon/eBay): Be extremely cautious. While you might find fobs listed for Kenworths, aftermarket support for 2022 Paccar electronics is virtually nonexistent. An incorrect aftermarket fob simply won't communicate with the ESA software during pairing.

    If on-board programming isn't supported

    As established, you cannot do this yourself. Your truck's security and immobilizer system (if equipped) are deeply tied to the CECU and Engine Control Module (ECM).

    If you lose all your keys, the situation becomes an emergency. A technician will not only have to program the new keyless entry fobs but will also have to cut new mechanical keys by VIN or by picking and decoding the door lock. If your specific fleet spec included a transponder immobilizer (common in newer high-security fleet specs), the chip in the key head must also be paired to the ECM to allow fuel and ignition. Expect a "lost all keys" scenario to cost anywhere from $300 to $600+ depending on your location and mobile service fees.

    Don't let a lost key keep your rig off the road. Find a mobile locksmith or shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2022 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-10-08.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email