2019 Ford Explorer — Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Ford Explorer? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 150 ft-lb (204 Nm) | Star pattern |
| Oil Drain Plug | 19 ft-lb (25 Nm) | |
| Transmission Drain Plug | 35 ft-lb (47 Nm) | |
| Brake Caliper Bracket Bolts (Front) | 184 ft-lb (250 Nm) | |
| Brake Caliper Bracket Bolts (Rear) | 133 ft-lb (180 Nm) | |
| Brake Caliper Slide Pins | 22 ft-lb (30 Nm) | |
| Axle Nut (Front) | 221 ft-lb (300 Nm) | New nut required |
| Axle Nut (Rear) | 258 ft-lb (350 Nm) | New nut required |
| Spark Plugs | 11-13 ft-lb (15-18 Nm) | For 2.3L/3.5L EcoBoost engines |
| Spark Plugs | 89 in-lb (10 Nm) | For 3.5L Ti-VCT engine |
| Valve Cover Bolts | 89 in-lb (10 Nm) | |
| Intake Manifold Bolts | 18 ft-lb (25 Nm) |
Wheel lug torque pattern
For the 2019 Ford Explorer, the wheel lug nuts should be tightened in a star pattern. This ensures even seating of the wheel against the hub, preventing warping of the rotor or uneven stress on the wheel studs. After driving approximately 50-100 miles, it is good practice to re-check the lug nut torque to ensure they remain properly seated.
Brake torque notes
When working on the brakes of your 2019 Ford Explorer, precise torque is crucial for safety and performance. The brake caliper bracket bolts are under significant stress and must be tightened to specification to prevent component failure. Similarly, the brake caliper slide pins, which allow the caliper to move freely, require proper torque to function correctly and prevent uneven pad wear or binding. Always use new hardware where specified, especially for components like axle nuts, which are often single-use fasteners.
Why torque matters
Proper fastener torque is not just a suggestion; it's a critical aspect of vehicle maintenance and repair that directly impacts safety and reliability. Under-torqued fasteners can loosen over time due to vibration, leading to components falling off, leaks, or even catastrophic failure. Imagine a wheel coming loose or a brake caliper detaching – these are extreme but real possibilities when fasteners aren't properly tightened.
Conversely, over-torquing fasteners can be equally damaging. It can stretch or break bolts, strip threads, or even crack components like engine blocks or wheel hubs. This can lead to costly repairs, parts replacement, and compromise the structural integrity of your vehicle. For example, over-tightening spark plugs can damage the cylinder head threads, leading to an expensive repair. Over-tightening valve cover bolts can warp the cover or damage the gasket, causing oil leaks.
Using a calibrated torque wrench is essential for achieving the correct specifications. Always refer to the manufacturer's recommended torque values, as these are determined through extensive engineering and testing to ensure optimal performance and safety. Don't rely on "feel" or impact wrenches for final tightening, as these methods are highly inaccurate and can lead to serious issues.
Disclaimer: Always verify critical fastener torque specifications in your official OEM service manual for the 2019 Ford Explorer. This guide provides general information and ranges but specific submodels and configurations may have unique requirements.
Find a trusted shop on Repairius.
More specs for the 2019 Ford Explorer
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Ford Explorer Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.