2016 Honda Accord Wheel Alignment Specifications
Working on this 2016 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Reference: 2016 Honda Accord Alignment Specs
These specifications are for the 2016 Honda Accord and should be used as a guide. Always refer to a professional alignment technician and the latest OEM service information for the most accurate data. Values are in degrees.
| Angle | Front Pref | Front Range | Rear Pref | Rear Range |
|---|---|---|---|---|
| Camber | 0.0° | -0.75° to +0.75° | -1.0° | -1.75° to -0.25° |
| Caster | +4.6° | +4.1° to +5.1° | N/A | N/A |
| Total Toe | 0.0° | -0.16° to +0.16° | +0.16° | 0.0° to +0.32° |
| Individual Toe | 0.0° | -0.08° to +0.08° | +0.08° | 0.0° to +0.16° |
| SAI | 13.5° | Diagnostic Only | N/A | N/A |
| Thrust Angle | N/A | N/A | 0.0° | -0.15° to +0.15° |
Note: SAI (Steering Axis Inclination) is a non-adjustable diagnostic angle. If SAI is out of specification, it typically indicates bent or damaged suspension components like a steering knuckle or strut.
Adjustability
Understanding which alignment angles are adjustable from the factory is crucial for any technician or owner.
-
Front Axle: On a 2016 Honda Accord, the only directly adjustable angle on the front suspension is Toe. This is adjusted by loosening the jam nuts on the inner tie rods and rotating them to lengthen or shorten their effective length. Front Camber and Caster are not adjustable from the factory. If these angles are out of spec, it almost always points to a bent strut, steering knuckle, lower control arm, or a shifted subframe from an impact.
-
Rear Axle: The rear suspension of the 2016 Accord offers more adjustability. Both Rear Camber and Rear Toe are adjustable. These adjustments are made using eccentric bolts located on the inboard side of the lower control arms. Turning these cams shifts the position of the control arm, allowing for precise changes to the camber and toe angles to bring them into the correct specification.
Recommended Adjustment Hardware
When front camber or caster is out of specification on a 2016 Accord, correction requires aftermarket parts. Since the factory components are non-adjustable, specialized hardware is needed to introduce adjustability.
For correcting front camber, aftermarket adjustable upper ball joints are the most common solution. Brands like SPC (Specialty Products Company) manufacture ball joints that are designed to replace the stock, non-adjustable ones. These replacements feature a sliding or offset design that can add or subtract up to 1.5 degrees of camber, and sometimes caster, allowing a technician to bring the alignment back into the proper range after an impact or when the vehicle has been lowered.
In some cases, if only a small change is needed, eccentric "crash" bolts for the lower strut mount can be used, but these offer a much smaller range of adjustment compared to adjustable ball joints.
Symptoms of Bad Alignment
A misaligned vehicle will exhibit several clear symptoms, many of which result in premature tire wear.
-
Vehicle Pulling or Drifting: The most common complaint is the car pulling to one side of the road when you let go of the steering wheel. This is often caused by an uneven side-to-side Caster or Camber angle.
-
Crooked Steering Wheel: When driving straight, the steering wheel is off-center. This is a direct indicator of an incorrect toe setting.
-
Tire Wear Patterns:
- Inner/Outer Edge Wear: This is a classic sign of a Camber issue. If the inside shoulder of the tire is worn, it indicates excessive negative camber. If the outside shoulder is worn, it indicates excessive positive camber.
- Feathered/Saw-Tooth Wear: If you run your hand across the tread and it feels smooth in one direction but sharp and jagged in the other, this is called feathering. It is almost always caused by an incorrect Toe setting, which scuffs the tires sideways as they roll.
- Loud Tire Noise: As alignment-related wear patterns develop, they can create excessive road noise that gets louder with speed.
When to Align
Getting a wheel alignment is a critical maintenance step. You should have your alignment checked and adjusted in the following situations:
- After installing new tires: To protect your investment and ensure they wear evenly from the start.
- After any suspension or steering component replacement: This includes struts, control arms, tie rods, ball joints, or bushings. Replacing these parts will almost always alter the vehicle's alignment angles.
- After a significant impact: Hitting a curb, a large pothole, or being in a minor accident can easily knock the suspension out of alignment.
- When you notice symptoms: If you feel the car pulling or see any of the tire wear patterns described above, it's time for an alignment check.
Typical Alignment Cost
For a 2016 Honda Accord, you will need a four-wheel alignment, as the rear axle is adjustable. The cost for a professional, computerized four-wheel alignment typically ranges from $120 to $200. Prices can vary based on your location, the type of shop (dealer vs. independent), and whether any specialized adjustment kits are needed to correct for non-adjustable angles that are out of specification.
Find a trusted alignment shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2016 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2016 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-26.