Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Key Fob Programming

    2016 Honda Accord Key Fob Programming

    Everything on this vehicle

    Working on this 2016 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    ItemDetail
    FCC IDMLBHLIK6-1TA
    OEM Fob PN35111-T2A-300 (4-button), 35111-T2A-J01 (5-button remote start)
    Aftermarket OptionsLook for MLBHLIK6-1TA compatible fobs
    Battery TypeCR2032
    Programmable On-Board?Yes
    Cuts Required?Yes, for integrated key

    Step-by-step on-board programming

    The 2016 Honda Accord supports on-board programming for the key fob remote functions. This procedure will NOT program the immobilizer chip inside the key, which is required for the car to start. That typically requires a diagnostic scan tool.

    Before you begin:

    • Gather all existing and new key fobs you want to program. Any fobs not programmed during this procedure will no longer work.
    • Ensure your vehicle's battery is in good condition.
    1. Close all doors, then open the driver's door.
    2. Turn the ignition to the ON (II) position.
    3. Press and hold the LOCK button on the first remote for 1-2 seconds.
    4. Within 5 seconds, turn the ignition to the OFF (0) position.
    5. Repeat steps 2-4 three more times (total of four cycles). You should hear the door locks cycle (lock/unlock) after the fourth OFF position.
    6. Turn the ignition to the ON (II) position.
    7. Press the LOCK button on the first remote. The door locks should cycle to confirm successful programming.
    8. For additional remotes, press the LOCK button on each additional remote within 10 seconds of the previous one. The door locks will cycle after each successful programming.
    9. Once all remotes are programmed, turn the ignition to the OFF (0) position and remove the key. Test all remotes.

    Battery replacement

    Replacing the battery in your 2016 Honda Accord key fob is a simple process:

    1. Locate the small release button or switch on the side of the key fob. Press or slide it to release the emergency key. Pull the emergency key out.
    2. With the emergency key removed, you will see a slot. Use a small flat-head screwdriver or a coin to carefully pry open the two halves of the key fob casing.
    3. Once opened, you will see the circuit board and the CR2032 coin cell battery. Note the orientation of the battery (positive side up).
    4. Gently pry out the old battery and insert the new CR2032 battery with the positive side facing up.
    5. Carefully snap the two halves of the key fob back together, ensuring a secure fit.
    6. Reinsert the emergency key.

    Where to buy a replacement fob

    • Dealer: Honda dealerships will provide genuine OEM fobs, cut the key blade, and program both the remote functions and the immobilizer. This is generally the most expensive option, often ranging from $200-$400 for parts and labor.
    • Locksmith: A professional automotive locksmith can often provide and program OEM or high-quality aftermarket fobs for a significantly lower cost than the dealer, typically $150-$250. They can also cut the key blade on-site.
    • Amazon/Online: You can find compatible aftermarket fobs online for $20-$60. However, you will still need to have the key blade cut and the immobilizer programmed by a locksmith or dealer. This is the cheapest route if you're comfortable with the DIY remote programming, but the immobilizer programming cost will add to it.

    If on-board programming isn't supported

    While the remote functions of the 2016 Honda Accord key fob can be programmed on-board, the crucial immobilizer transponder chip, which allows the car to start, requires specialized diagnostic equipment. This means if you buy an uncut, un-programmed key fob online, you'll still need either a locksmith or a Honda dealership to:

    • Cut the integrated key blade to match your vehicle's ignition.
    • Program the immobilizer transponder chip to your vehicle's ECU.

    Expect to pay a locksmith around $75-$150 for cutting and immobilizer programming, in addition to the cost of the fob itself. A dealership will likely charge more for these services. The immobilizer transponder type is typically a proprietary Honda chip, and a new chip must be correctly introduced to the vehicle's immobilizer system using a scan tool to allow the car to start.

    Find a mobile locksmith or shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2016 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-26.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email