Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Spark Plug Type & Gap

    2016 Honda Accord Spark Plug Type & Gap

    Everything on this vehicle

    Comprehensive guide to spark plug specifications and replacement for your 2016 Honda Accord

    Working on this 2016 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    EngineOEM Plug PN (NGK)Aftermarket (Denso)Gap (in/mm)Torque (lb-ft / Nm)Interval (miles/km)
    2.4L I4 (K24W1)NGK DILKAR7G11GSDenso FK20HBR110.044 in / 1.1 mm13 lb-ft / 18 Nm100,000 miles / 160,000 km
    3.5L V6 (J35Y2)NGK DILZKR7A11GSDenso ZKBR7A-HTP0.044 in / 1.1 mm13 lb-ft / 18 Nm100,000 miles / 160,000 km

    Why the right plug matters

    Choosing the correct spark plug for your 2016 Honda Accord is crucial for optimal engine performance, fuel efficiency, and longevity. Spark plugs are not "one-size-fits-all" components, and using the wrong type can lead to a host of problems.

    Heat Range: Spark plugs are designed with a specific "heat range," which refers to their ability to dissipate heat from the combustion chamber. A "hotter" plug retains more heat, while a "colder" plug dissipates more. Using a plug that's too hot can lead to pre-ignition and engine damage (known as "pinging" or "knocking"), while a plug that's too cold can cause fouling and misfires. The OEM-specified plugs are precisely engineered for the thermal characteristics of your Accord's engine.

    Electrode Metal: The material of the spark plug's electrodes significantly impacts its lifespan and performance:

    • Iridium: This is the most common and recommended material for modern Honda engines, including your 2016 Accord. Iridium is incredibly hard and has a very high melting point, allowing for very fine electrodes. This results in a more concentrated spark, better ignitability, and significantly longer service intervals (typically 100,000 miles or more). Both the OEM NGK and Denso plugs listed for your Accord are iridium-tipped.
    • Platinum: Platinum plugs offer good durability and a longer lifespan than copper, but typically not as long as iridium. They were an upgrade from copper plugs in an earlier era. You're unlikely to find new platinum-only plugs recommended for your 2016 Accord.
    • Copper: Copper is an excellent conductor of electricity, but it's a softer metal, leading to much shorter lifespans. Copper plugs are generally found in older vehicles or those with high-performance applications where frequent changes are acceptable. They are not suitable for your 2016 Honda Accord and would require much more frequent replacement, leading to increased maintenance costs and potential performance issues.

    How to gap a spark plug

    While many modern iridium spark plugs come "pre-gapped" from the factory, it's always a good idea to check the gap before installation, especially if the plug has been dropped or had its packaging damaged. The gap is the distance between the center and ground electrodes.

    Tools Needed: A wire-type spark plug gapping tool (round coin-style gap tools are not recommended for fine-wire iridium plugs as they can damage the electrode). Some gapping tools also have a bending feature.

    Procedure:

    1. Carefully insert the correct size wire gauge of your tool between the electrodes. It should slide in with a slight amount of drag.
    2. If the gap is too small, use the bending tool integrated into your gapping gauge or a dedicated gapping tool to gently widen the gap. Do not pry directly on the center electrode.
    3. If the gap is too wide, gently tap the ground electrode on a hard, flat surface to slightly close the gap. Recheck after each adjustment.
    4. Be extremely careful not to put any side load or force on the fine iridium tip, as it is relatively delicate.

    For your 2016 Honda Accord, the specified gap for both engines is 0.044 inches (1.1 mm).

    Replacement procedure tips

    Replacing spark plugs on your 2016 Honda Accord is a manageable DIY task for most mechanically inclined individuals, but there are a few important considerations:

    1. Coil-on-Plug (COP) System: Your Accord uses a coil-on-plug ignition system, meaning each spark plug has its own ignition coil mounted directly above it. To access the spark plugs, you'll need to carefully disconnect the electrical connector from each coil and then remove the coil hold-down bolt (usually a 10mm bolt). Gently twist and pull the coil straight up to remove it.
    2. Cleanliness is Key: Before removing the old spark plugs, it's critical to blow out any dirt or debris around the spark plug wells using compressed air. This prevents contaminants from falling into the combustion chamber once the old plug is removed.
    3. Anti-Seize Debate: There's mixed opinion on using anti-seize compound on spark plug threads. For modern spark plugs with nickel-plated shells (which most OEM-specified plugs like NGK and Denso are), manufacturers like NGK explicitly advise against using anti-seize. The nickel plating provides adequate anti-seize properties, and adding more can alter the torque readings, potentially leading to over-tightening and plug breakage or cylinder head damage. Follow the plug manufacturer's recommendation.
    4. Dielectric Grease: It's good practice to apply a small amount of dielectric grease inside the spark plug boot (the end that connects to the spark plug porcelain) before reinstalling the coil. This helps prevent moisture intrusion, improves electrical insulation, and makes future removal easier. Be careful not to get grease on the electrodes.
    5. Torque Wrench is Essential: Always use a torque wrench to tighten the new spark plugs to the manufacturer's specified torque (13 lb-ft or 18 Nm for both Accord engines). Over-tightening can damage the spark plug and/or the cylinder head threads, while under-tightening can lead to poor electrical contact, blow-by, and potential plug ejection.

    Known Issues

    Fortunately, the 2016 Honda Accord is not known for any specific widespread or catastrophic spark plug-related issues like the Ford 3-valve engine's breaking two-piece plugs. The engines in the 2016 Accord (the K24W1 2.4L I4 and the J35Y2 3.5L V6) are generally robust. As long as the correct OEM-specified iridium plugs are used and replaced at the recommended intervals with proper torque, you should not encounter any unusual problems.

    Need plugs replaced? Find a shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2016 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-07-05.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email