2016 Honda Accord Bulb Sizes: The Complete Repairius.com Guide
Working on this 2016 Honda Accord? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Location | Bulb Size | Type |
|---|---|---|
| Low Beam (Halogen) | H11 | Halogen (some trims HID/LED) |
| Low Beam (HID) | D4S | Xenon HID |
| Low Beam (LED) | Varies | Non-replaceable LED |
| High Beam | 9005 | Halogen |
| Fog Light | H11 | Halogen |
| DRL | 9005 | Halogen (integrated with high beam) |
| Front Turn Signal | 7440 | Incandescent |
| Rear Turn Signal | 7440 | Incandescent |
| Brake Light | 7440 | Incandescent (some trims LED) |
| Tail Light | 7443 | Incandescent (some trims LED) |
| Reverse Light | 7440 | Incandescent |
| License Plate | 168 / 194 | Incandescent |
| Front Side Marker | 168 / 194 | Incandescent |
| Dome Light | DE3175 / 3175 | Festoon Incandescent |
| Map Light | 168 / 194 | Incandescent |
The 2016 Honda Accord offers a range of lighting options that can vary significantly depending on the trim level. Understanding these differences is crucial for any repair or upgrade. Most Accord models came equipped with traditional halogen bulbs, but higher trim levels, particularly the Touring, introduced more advanced lighting technologies like HID (High-Intensity Discharge) for low beams and even full LED headlights on some variants.
For most Accord LX, Sport, EX, and EX-L trims, the low beam headlights use an H11 halogen bulb, known for its widespread availability and easy replacement. However, if your Accord has the projector-style headlights, often found on EX-L V6 or Sport Special Edition, these might actually be Xenon HIDs, which use a D4S bulb. The top-tier Touring trim introduced full LED headlights, where the entire assembly is designed around non-replaceable LED elements – meaning if an LED fails, the whole housing often needs replacement. The high beam for all halogen-equipped models consistently uses a 9005 bulb. The fog lights, when present, universally take an H11 bulb, matching the standard halogen low beams, which simplifies bulb stocking for enthusiasts.
Daytime Running Lights (DRLs) on the 2016 Accord are typically integrated with the high beam function, utilizing the same 9005 bulb but at a reduced voltage for lower intensity. This is a common design to save space and cost. Both the front and rear turn signals commonly utilize a 7440 incandescent bulb. However, some higher trim levels may feature LED turn signals, especially in the rear, which are usually integrated into the tail light assembly and not user-serviceable. Similarly, brake lights and tail lights primarily use a 7440 for the brake function and a 7443 for the tail light, with LED versions appearing on more premium trims.
Reverse lights across all trims are generally a 7440 bulb, providing good illumination for backing up. For smaller exterior lights, the license plate lights use either a 168 or 194 bulb, as do the front side marker lights. These are standard miniature incandescent bulbs, easy to find and replace. Inside the cabin, the dome light typically uses a DE3175 (or 3175) festoon-style bulb, while the individual map lights predominantly use 168 or 194 bulbs, offering bright, focused illumination for reading.
LED vs halogen upgrade considerations
Upgrading from halogen to LED bulbs in your 2016 Honda Accord can significantly improve light output and modernize the vehicle's appearance. However, there are several factors to consider. The most common issue is CANBUS errors. Newer vehicles often have a CANBUS (Controller Area Network Bus) system that monitors bulb resistance. LED bulbs draw much less power than halogens, which can trick the CANBUS system into thinking a bulb is out, triggering a "bulb out" warning light on your dashboard or causing hyper-flashing for turn signals. To prevent this, you'll often need to install LED decoders or load resistors. These devices add resistance to the circuit, mimicking the power draw of a halogen bulb and satisfying the CANBUS system.
Another consideration is physical fitment. While many aftermarket LED bulbs are designed to be "plug-and-play," some larger LED bulbs with integrated cooling fans or heatsinks may not fit perfectly within the headlight housing or behind the dust caps. Always check the dimensions and ensure sufficient space for proper installation and heat dissipation, especially for enclosed headlight assemblies. For low beams, some LED kits may require specific adapters to properly seat the bulb in the headlight housing, particularly for H11 applications where the LED base geometry might differ slightly from the halogen counterpart. When upgrading turn signals, ensure the LED bulbs are "switchback" compatible if you have DRLs that use the turn signal filament, or be prepared for additional wiring.
How to replace each bulb
- Low Beam (H11/9005), High Beam (9005), Fog Light (H11): Access is usually from under the hood. Locate the back of the headlight or fog light assembly, twist the bulb counter-clockwise to remove, disconnect the electrical connector, and then reverse the process with the new bulb. For HID D4S bulbs, special care is needed due to high voltage. Always disconnect the battery before working with HID systems.
- DRL (9005): Integrated with the high beam. Follow the high beam replacement procedure.
- Front Turn Signal (7440): Often accessible from under the hood, behind the headlight assembly. Twist the socket to remove, pull out the old bulb, and insert the new one.
- Rear Turn Signal (7440), Brake Light (7440), Tail Light (7443), Reverse Light (7440): Typically, you'll need to open the trunk and remove a few plastic clips or screws to access the tail light assembly from the inside. Once the assembly is loose, you can usually twist the individual bulb sockets to remove them and replace the bulbs. Be careful not to scuff the paint when removing/reinstalling the assembly.
- License Plate (168/194): These are usually accessed by removing a few small screws that hold the plastic lens cover in place above the license plate. Pop out the lens, twist the socket, and replace the bulb.
- Front Side Marker (168/194): Often requires reaching into the wheel well or carefully prying the side marker lens from the fender. A plastic trim removal tool is recommended to avoid scratching the paint.
- Dome Light (DE3175/3175): Carefully pry down the plastic lens cover using a plastic trim tool. The festoon bulb simply pushes into metal clips. Gently pull it out and push the new one in.
- Map Light (168/194): Similar to the dome light, carefully pry off the plastic lens. The bulb pulls straight out from its socket.
Common lighting issues for this generation
Owners of the 2016 Honda Accord occasionally report a few common lighting issues. One prevalent complaint, especially with higher mileage vehicles, is premature halogen bulb burnout for headlights and fog lights. This can often be attributed to vibrations, voltage spikes, or simply the natural lifespan of halogen bulbs, which is shorter than LEDs or HIDs. Replacing both bulbs at the same time, even if only one has failed, is recommended as the other often isn't far behind.
For models equipped with HID headlights, failing ballasts or igniters can lead to flickering, intermittent operation, or a complete failure of the HID bulb to ignite. This usually requires replacing the ballast unit in addition to the D4S bulb. If your Touring model has the full LED headlights, a common—though less frequent—concern is the failure of individual LED elements or the entire LED headlight assembly. Since these are not designed for individual bulb replacement, a full headlight unit replacement can be costly but is often the only solution.
Another minor but recurring issue is condensation inside the headlight or tail light assemblies. While a small amount of condensation can be normal and dissipate, excessive moisture build-up can indicate a cracked seal or housing, potentially leading to premature bulb failure or damage to internal components. It's advisable to inspect and address any persistent condensation.
Find a trusted shop on Repairius.
Need service on your Honda Accord?
Your vehicle and question are already filled in — just add your location.
More specs for the 2016 Honda Accord
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2016 Honda Accord Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-24.