Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Serpentine Belt Routing & Length

    2016 Honda Accord Serpentine Belt: Routing, Replacement, and Part Numbers

    Everything on this vehicle

    Working on this 2016 Honda Accord? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    • Belt Length: Approximately 80.5 inches (2045mm)
    • Rib Count: 6-rib
    • OEM Belt Part Number: 31110-5A2-A01
    • Aftermarket Cross-references:
      • Gates K060805
      • Dayco 5060805
      • Continental Elite 4060805
    • Auto-Tensioner Part Number: 31170-5A2-A01
    • Idler Pulley Part Number: 31180-5A2-A01

    Belt Routing (2.4L and 3.5L Engines)

    The 2016 Honda Accord utilizes a single serpentine belt to drive multiple accessories, including the air conditioning compressor, power steering pump, alternator, and water pump. Before attempting any belt removal, it is highly recommended to take a photograph of the current belt routing. This will serve as an invaluable reference during reinstallation.

    The serpentine belt typically routes as follows, though minor variations may exist between the 2.4L 4-cylinder and 3.5L V6 engines. This description is for general guidance:

    1. Starting from the crankshaft pulley (at the bottom, center of the engine).
    2. The belt usually goes up and over the A/C compressor pulley (typically located on the lower passenger side).
    3. From the A/C compressor, it might then go to an idler pulley (a smooth pulley that guides the belt).
    4. Next, it typically routes to the alternator pulley (usually located towards the top or front of the engine).
    5. The belt then travels to the power steering pump pulley (if equipped, often on the driver's side, higher up).
    6. From there, it makes its way to the water pump pulley.
    7. Finally, the belt routes around the automatic tensioner pulley before returning to the crankshaft pulley, completing the loop. The tensioner is crucial for maintaining proper belt tension.

    How to Replace the Serpentine Belt

    Replacing the serpentine belt on a 2016 Honda Accord is a manageable DIY task for those with some mechanical experience. You will typically need a serpentine belt tool or a 3/8-inch breaker bar to release the tension on the automatic tensioner.

    1. Safety First: Ensure the engine is off and cool. Disconnect the negative battery terminal to prevent accidental starting.
    2. Document Routing: As mentioned, take a clear photo of the old belt's routing.
    3. Release Tension: Locate the automatic belt tensioner. Insert your serpentine belt tool or 3/8-inch breaker bar into the square drive hole on the tensioner arm. Rotate the tensioner to release the tension on the belt. This will allow you to remove the belt from one of the pulleys.
    4. Remove Old Belt: Carefully slide the old belt off all the pulleys.
    5. Inspect Pulleys: While the belt is off, inspect all pulleys for any signs of wear, wobbling, or excessive noise when spun by hand. Also, check the tensioner for proper spring action and any play.
    6. Install New Belt: Refer to your photograph and carefully route the new belt around all pulleys, leaving one pulley (often the last one before the tensioner or an easy-to-reach idler) for last.
    7. Apply Tension: Again, use your serpentine belt tool or breaker bar to rotate the tensioner arm, creating enough slack to slide the belt over the final pulley.
    8. Release Tensioner: Slowly release the tensioner, allowing it to apply proper tension to the new belt.
    9. Verify Routing: Double-check that the belt is correctly seated in all pulley grooves.
    10. Reconnect Battery: Reconnect the negative battery terminal.
    11. Test Drive: Start the engine and listen for any abnormal noises. Observe the belt's movement to ensure it tracks correctly.

    Replacement Interval

    Honda typically recommends inspecting the serpentine belt every 30,000 miles or 30 months and replacing it as needed. However, the actual replacement interval can vary based on driving conditions and vehicle usage. Many technicians recommend proactive replacement between 60,000 and 100,000 miles, or sooner if signs of wear are present.

    Signs of a Failing Belt or Tensioner

    It's crucial to pay attention to your vehicle's warning signs. A failing serpentine belt or tensioner can lead to significant issues, including loss of power steering, alternator charging, and air conditioning.

    Signs of a Failing Serpentine Belt:

    • Squealing or Chirping Noises: This is one of the most common indicators, especially on cold starts, during acceleration, or when turning the steering wheel. It can indicate a worn or misaligned belt, or a failing pulley.
    • Cracks, Fraying, or Glazing: Visually inspect the belt for these signs of wear. A glazed belt appears shiny and smooth, indicating it's losing its grip.
    • Loss of Power Steering, A/C, or Charging: If the belt breaks or slips excessively, the components it drives will cease to function.
    • Engine Overheating: A broken or slipping belt can prevent the water pump from circulating coolant, leading to overheating.

    Signs of a Failing Automatic Tensioner:

    • Excessive Belt Squeal (even after belt replacement): A weak tensioner might not maintain proper tension, causing the belt to slip.
    • Belt Slippage or Wobble: The belt may appear to wobble excessively or jump off pulleys if the tensioner isn't holding it securely.
    • Visible Wear or Play: Inspect the tensioner pulley for excessive play or wobbling. If the pulley doesn't spin smoothly or has side-to-side movement, it needs replacement.
    • Unusual Noises from Tensioner: Grinding or rattling noises from the tensioner pulley itself indicate worn bearings.

    Find a trusted shop on Repairius.

    Need service on your Honda Accord?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2016 Honda Accord

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email